Difference between revisions of "Orange Pi R1 Plus LTS"

From Wiki-Orange Pi
Jump to: navigation, search
Line 74: Line 74:
 
| Weight|| 30.5g
 
| Weight|| 30.5g
 
|-  
 
|-  
|colspan=2|<div style="text-align:center;">[[文件:Orange-pi-small-logo.png|30px|]]Orange Pi™ is a trademark of the Shenzhen Xunlong Software CO., Limited</div>
+
|colspan=2|<div style="text-align:center;">[[File:Orange-pi-small-logo.png|30px|]]Orange Pi™ is a trademark of the Shenzhen Xunlong Software CO., Limited</div>
 
|}
 
|}
 
<br>
 
<br>
Line 81: Line 81:
 
<br>
 
<br>
 
'''Top View:'''<br>
 
'''Top View:'''<br>
<div>[[文件:Orange-pi-r1-plus-lts-img1.png|500px|]]</div>
+
<div>[[File:Orange-pi-r1-plus-lts-img1.png|500px|]]</div>
 
<br>
 
<br>
 
'''Bottom View:'''<br>
 
'''Bottom View:'''<br>
<div>[[文件:Orange-pi-r1-plus-lts-img2.png|500px|]]</div>
+
<div>[[File:Orange-pi-r1-plus-lts-img2.png|500px|]]</div>
 
<br>
 
<br>
 
=== '''Orange Pi R1 Plus LTS interface details''' ===
 
=== '''Orange Pi R1 Plus LTS interface details''' ===
 
<br>
 
<br>
<div>[[文件:Orange-pi-r1-plus-lts-img3.png|600px|]]</div>
+
<div>[[File:Orange-pi-r1-plus-lts-img3.png|600px|]]</div>
 
<br>
 
<br>
<div>[[文件:Orange-pi-r1-plus-lts-img4.png|600px|]]</div>
+
<div>[[File:Orange-pi-r1-plus-lts-img4.png|600px|]]</div>
 
<br>
 
<br>
 
==  '''Introduction to use the development board''' ==
 
==  '''Introduction to use the development board''' ==
Line 97: Line 97:
 
<br>
 
<br>
 
1)TF card, a high-speed card of class 10 or higher with a minimum capacity of 8GB, it is recommended to use SanDisk TF card. Orange Pi tests are all SanDisk TF cards. Other brands of TF cards may cause the system to fail to start.<br>
 
1)TF card, a high-speed card of class 10 or higher with a minimum capacity of 8GB, it is recommended to use SanDisk TF card. Orange Pi tests are all SanDisk TF cards. Other brands of TF cards may cause the system to fail to start.<br>
<div style="padding-left:200px">[[文件:Orange-pi-one-img4.png|250px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-one-img4.png|250px]]</div>
 
<br>
 
<br>
 
2)TF card reader, used to read and write TF card<br>
 
2)TF card reader, used to read and write TF card<br>
<div style="padding-left:200px">[[文件:Orange-pi-3-lts-tfcard.png|250px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3-lts-tfcard.png|250px]]</div>
 
<br>
 
<br>
 
3)Power adapter, 5V/2A or 5V/3A high-quality Type C interface power adapter<br>
 
3)Power adapter, 5V/2A or 5V/3A high-quality Type C interface power adapter<br>
<div style="padding-left:200px">[[文件:Orange-pi-r1-plus-lts-img5.png|250px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-r1-plus-lts-img5.png|250px]]</div>
 
<br>
 
<br>
 
4)13pin interface board<br>
 
4)13pin interface board<br>
Line 109: Line 109:
 
<br>
 
<br>
 
<div style="padding-left: 200px">
 
<div style="padding-left: 200px">
[[文件:Orange-pi-r1-plus-lts-img6.png|250px]]
+
[[File:Orange-pi-r1-plus-lts-img6.png|250px]]
 
</div>
 
</div>
 
<br>
 
<br>
Line 115: Line 115:
 
<br>
 
<br>
 
<div style="padding-left: 200px">
 
<div style="padding-left: 200px">
[[文件:Orange-pi-r1-plus-lts-img7.png|250px]]
+
[[File:Orange-pi-r1-plus-lts-img7.png|250px]]
 
</div>
 
</div>
 
<br>
 
<br>
Line 131: Line 131:
 
 d.The schematic diagram of the 13pin header of Orange Pi R1 Plus LTS is shown below
 
 d.The schematic diagram of the 13pin header of Orange Pi R1 Plus LTS is shown below
 
<div>
 
<div>
[[文件:Orange-pi-r1-plus-lts-img8.png|600px]]
+
[[File:Orange-pi-r1-plus-lts-img8.png|600px]]
 
</div>
 
</div>
 
<br>
 
<br>
 
5)CPU fan, used to dissipate heat to the CPU, the interface voltage is 5V, the interface specification is 2pin, 1.5mm spacing
 
5)CPU fan, used to dissipate heat to the CPU, the interface voltage is 5V, the interface specification is 2pin, 1.5mm spacing
 
<div style="padding-left:200px;">
 
<div style="padding-left:200px;">
[[文件:Orange-pi-r1-plus-lts-img9.png|400px]]
+
[[File:Orange-pi-r1-plus-lts-img9.png|400px]]
 
</div>
 
</div>
 
<br>
 
<br>
Line 142: Line 142:
 
<br>
 
<br>
 
<div style="padding-left: 200px">
 
<div style="padding-left: 200px">
[[文件:Orange-pi-pc-plus-img4.png|250px]]
+
[[File:Orange-pi-pc-plus-img4.png|250px]]
 
</div>
 
</div>
 
<br>
 
<br>
Line 150: Line 150:
 
<br>
 
<br>
 
<div style="padding-left: 200px">
 
<div style="padding-left: 200px">
[[文件:Orange-pi-pc-plus-img5.png|250px]]
+
[[File:Orange-pi-pc-plus-img5.png|250px]]
 
</div>
 
</div>
 
<br>
 
<br>
Line 156: Line 156:
 
<br>
 
<br>
 
<div style="padding-left:40px;">
 
<div style="padding-left:40px;">
[[文件:Orange-pi-r1-plus-lts-img10.png|165px]][[文件:Orange-pi-lite-img10.png|450px]]
+
[[File:Orange-pi-r1-plus-lts-img10.png|165px]][[File:Orange-pi-lite-img10.png|450px]]
 
</div>
 
</div>
 
<br>
 
<br>
Line 173: Line 173:
 
   http://www.orangepi.cn/downloadresourcescn/
 
   http://www.orangepi.cn/downloadresourcescn/
 
<div>
 
<div>
[[文件:Orange-pi-r1-plus-lts-img11.png|800px|]]
+
[[File:Orange-pi-r1-plus-lts-img11.png|800px|]]
 
</div>
 
</div>
 
<br>
 
<br>
Line 179: Line 179:
 
   http://www.orangepi.org/downloadresources/
 
   http://www.orangepi.org/downloadresources/
 
<div>
 
<div>
[[文件:Orange-pi-r1-plus-lts-img11.png|800px|]]
+
[[File:Orange-pi-r1-plus-lts-img11.png|800px|]]
 
</div>
 
</div>
 
<br>
 
<br>
Line 214: Line 214:
 
<br>
 
<br>
 
c.If the computer only has a TF card inserted, the TF card's drive letter will be displayed in the Select card column. If the computer has multiple USB storage devices inserted, you can select the drive letter corresponding to the TF card through the drop-down box<br>
 
c.If the computer only has a TF card inserted, the TF card's drive letter will be displayed in the Select card column. If the computer has multiple USB storage devices inserted, you can select the drive letter corresponding to the TF card through the drop-down box<br>
<div style="padding-left:180px">[[文件:Orange-pi-3lts-sdcardformatter.png|400px]]</div>
+
<div style="padding-left:180px">[[File:Orange-pi-3lts-sdcardformatter.png|400px]]</div>
 
d.Then click Format, a warning box will pop up before formatting, and formatting will start after selecting "Yes (Y)"
 
d.Then click Format, a warning box will pop up before formatting, and formatting will start after selecting "Yes (Y)"
<div style="padding-left:180px">[[文件:Orange-pi-3lts-sdcardformatter1.png|400px]]</div>
+
<div style="padding-left:180px">[[File:Orange-pi-3lts-sdcardformatter1.png|400px]]</div>
 
e.After formatting the TF card, the message shown in the figure below will pop up, click OK<br>
 
e.After formatting the TF card, the message shown in the figure below will pop up, click OK<br>
<div style="padding-left:180px">[[文件:Orange-pi-3lts-sdcardformatter2.png|400px]]</div>
+
<div style="padding-left:180px">[[File:Orange-pi-3lts-sdcardformatter2.png|400px]]</div>
 
</div>
 
</div>
 
5)Download the Linux operating system image file compression package you want to burn from the Orange Pi data download page, and then use the decompression software to decompress it. In the decompressed file, the file ending with ".img" is the operating system image file,the size is generally above 1GB.<br>
 
5)Download the Linux operating system image file compression package you want to burn from the Orange Pi data download page, and then use the decompression software to decompress it. In the decompressed file, the file ending with ".img" is the operating system image file,the size is generally above 1GB.<br>
Line 232: Line 232:
 
c)Finally click '''"Write"''' to start burning
 
c)Finally click '''"Write"''' to start burning
 
</p>
 
</p>
<div style="padding-left:180px">[[文件:Orange-pi-3lts-selectimage.png|400px]]</div>
+
<div style="padding-left:180px">[[File:Orange-pi-3lts-selectimage.png|400px]]</div>
 
c.After the image writing is completed, click the "Exit" button to exit, and then you can pull out the TF card and insert it into the development board to start
 
c.After the image writing is completed, click the "Exit" button to exit, and then you can pull out the TF card and insert it into the development board to start
 
</div>
 
</div>
Line 248: Line 248:
 
5)After entering the balenaEtcher download page, please select the Linux version of the software through the drop-down box to download<br>
 
5)After entering the balenaEtcher download page, please select the Linux version of the software through the drop-down box to download<br>
 
<br>
 
<br>
<div style="padding-left:200px">[[文件:Orange-pi-3lts-selectlinuxversion.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-selectlinuxversion.png|600px]]</div>
 
<br>
 
<br>
 
6)After downloading, use unzip to decompress. The decompressed balenaEtcher-1.5.109-x64.AppImage is the software needed to burn Linux image
 
6)After downloading, use unzip to decompress. The decompressed balenaEtcher-1.5.109-x64.AppImage is the software needed to burn Linux image
Line 280: Line 280:
 
c. Finally click Flash to start burning
 
c. Finally click Flash to start burning
 
</div>
 
</div>
<div style="padding-left:200px">[[文件:Orange-pi-3lts-balenaetcher.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-balenaetcher.png|600px]]</div>
 
10)The writing speed and remaining time will be prompted during the burning process
 
10)The writing speed and remaining time will be prompted during the burning process
<div style="padding-left:200px">[[文件:Orange-pi-3lts-balenaetcher1.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-balenaetcher1.png|600px]]</div>
 
11)After burning, the following interface will be displayed. At this time, you can unplug the TF card from the computer and insert it into the development board to start.
 
11)After burning, the following interface will be displayed. At this time, you can unplug the TF card from the computer and insert it into the development board to start.
<div style="padding-left:200px">[[文件:Orange-pi-3lts-balenaetcher2.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-balenaetcher2.png|600px]]</div>
  
 
=== '''Method of flashing Android firmware to TF card''' ===
 
=== '''Method of flashing Android firmware to TF card''' ===
Line 299: Line 299:
 
<br>
 
<br>
 
5) Use decompression software to decompress SDDiskTool_v1.59, this software does not need to be installed, find SD_Firmware_Tool in the decompressed folder and open it
 
5) Use decompression software to decompress SDDiskTool_v1.59, this software does not need to be installed, find SD_Firmware_Tool in the decompressed folder and open it
<div style="padding-left:200px">[[文件:Orange-pi-r1-plus-lts-img12.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-r1-plus-lts-img12.png|600px]]</div>
 
<br>
 
<br>
 
6)After opening SD_Firmware_Tool, if the TF card is recognized normally, the name and capacity of the TF card will be displayed when the removable disk device is selected. <span style="color:red;">Please make sure that the displayed TF card device information is consistent with the device information of the TF card you want to burn.</span> There is no display, you can try to unplug the TF card<br>
 
6)After opening SD_Firmware_Tool, if the TF card is recognized normally, the name and capacity of the TF card will be displayed when the removable disk device is selected. <span style="color:red;">Please make sure that the displayed TF card device information is consistent with the device information of the TF card you want to burn.</span> There is no display, you can try to unplug the TF card<br>
<div style="padding-left:200px">[[文件:Orange-pi-r1-plus-lts-img13.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-r1-plus-lts-img13.png|600px]]</div>
 
7)After confirming the device information, start writing the Android firmware to the TF card<br>
 
7)After confirming the device information, start writing the Android firmware to the TF card<br>
 
<div style="padding-left:20px;">
 
<div style="padding-left:20px;">
Line 308: Line 308:
 
b. Select the path of Android image in "Select Firmware Upgrade"<br>
 
b. Select the path of Android image in "Select Firmware Upgrade"<br>
 
c. Then click the "Start Create" button<br>
 
c. Then click the "Start Create" button<br>
<div style="padding-left:180px">[[文件:Orange-pi-r1-plus-lts-img14.png|600px]]</div>
+
<div style="padding-left:180px">[[File:Orange-pi-r1-plus-lts-img14.png|600px]]</div>
 
<br>
 
<br>
 
d.After clicking "Start to create", a warning box will pop up, select "Yes (Y)" to start burning
 
d.After clicking "Start to create", a warning box will pop up, select "Yes (Y)" to start burning
<div style="padding-left:180px">[[文件:Orange-pi-r1-plus-lts-img15.png|600px]]</div>
+
<div style="padding-left:180px">[[File:Orange-pi-r1-plus-lts-img15.png|600px]]</div>
 
<br>
 
<br>
 
e.After starting to burn, the partition currently being burned will be displayed below
 
e.After starting to burn, the partition currently being burned will be displayed below
<div style="padding-left:180px">[[文件:Orange-pi-r1-plus-lts-img16.png|600px]]</div>
+
<div style="padding-left:180px">[[File:Orange-pi-r1-plus-lts-img16.png|600px]]</div>
 
<br>
 
<br>
 
</div>
 
</div>
 
8)After burning, the display of SD_Firmware_Tool is as shown in the figure below. At this time, click the OK button to close SD_Firmware_Tool, and then you can unplug the TF card from the computer and insert it into the development board to start<br>
 
8)After burning, the display of SD_Firmware_Tool is as shown in the figure below. At this time, click the OK button to close SD_Firmware_Tool, and then you can unplug the TF card from the computer and insert it into the development board to start<br>
<div style="padding-left:200px">[[文件:Orange-pi-r1-plus-lts-img17.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-r1-plus-lts-img17.png|600px]]</div>
  
 
=== ''' Start the Orange Pi development board''' ===
 
=== ''' Start the Orange Pi development board''' ===
Line 337: Line 337:
 
==== '''Debug serial port connection instructions''' ====
 
==== '''Debug serial port connection instructions''' ====
 
1)First, you need to prepare a USB to TTL module. This module can be bought in Orange Pi Store. If there are other similar USB to TTL modules, you can also insert the USB port of the USB to TTL module into the USB of the computer Interface
 
1)First, you need to prepare a USB to TTL module. This module can be bought in Orange Pi Store. If there are other similar USB to TTL modules, you can also insert the USB port of the USB to TTL module into the USB of the computer Interface
<div style="padding-left:200px">[[文件:Orange-pi-one-img9.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-one-img9.png|600px]]</div>
 
2)The corresponding relationship between the debug serial port GND, TX and RX pins of the development board is shown in the figure below
 
2)The corresponding relationship between the debug serial port GND, TX and RX pins of the development board is shown in the figure below
<div style="padding-left:200px">[[文件:Orange-pi-r1-plus-lts-img18.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-r1-plus-lts-img18.png|600px]]</div>
 
3)The GND, TX and RX pins of the USB to TTL module need to be connected to the debug serial port of the development board through a Dupont cable<br>
 
3)The GND, TX and RX pins of the USB to TTL module need to be connected to the debug serial port of the development board through a Dupont cable<br>
 
<div style="padding-left:20px">
 
<div style="padding-left:20px">
Line 348: Line 348:
 
<br>
 
<br>
 
4)The schematic diagram of connecting the USB to TTL module to the computer and the Orange Pi development board is shown below
 
4)The schematic diagram of connecting the USB to TTL module to the computer and the Orange Pi development board is shown below
<div style="padding-left:200px">[[文件:Orange-pi-3lts-ttlmodule2.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-ttlmodule2.png|600px]]</div>
 
<br>
 
<br>
 
5)If you are using a CP2102 USB to TTL module, under the condition of a baud rate of 1.500000, some systems may encounter garbled or unusable problems. The specific test situation is as follows
 
5)If you are using a CP2102 USB to TTL module, under the condition of a baud rate of 1.500000, some systems may encounter garbled or unusable problems. The specific test situation is as follows
Line 398: Line 398:
 
<br>
 
<br>
 
5)After executing the putty command, the following interface will pop up
 
5)After executing the putty command, the following interface will pop up
<div style="padding-left:200px">[[文件:Orange-pi-3lts-putty.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-putty.png|600px]]</div>
 
<br>
 
<br>
 
6)First select the setting interface of the serial port
 
6)First select the setting interface of the serial port
<div style="padding-left:200px">[[文件:Orange-pi-3lts-putty1.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-putty1.png|600px]]</div>
 
7)Then set the parameters of the serial port<br>
 
7)Then set the parameters of the serial port<br>
 
<div style="padding-left:20px;">
 
<div style="padding-left:20px;">
Line 408: Line 408:
 
c. Set Flow control to None
 
c. Set Flow control to None
 
</div>
 
</div>
<div style="padding-left:200px">[[文件:Orange-pi-r1-plus-lts-img19.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-r1-plus-lts-img19.png|600px]]</div>
 
8)After setting the serial port setting interface, return to the Session interface
 
8)After setting the serial port setting interface, return to the Session interface
 
<div style="padding-left:20px;">
 
<div style="padding-left:20px;">
 
a. First select the Connection type as Serial<br>
 
a. First select the Connection type as Serial<br>
 
b. Then click the Open button to connect to the serial port</div>
 
b. Then click the Open button to connect to the serial port</div>
<div style="padding-left:200px">[[文件:Orange-pi-r1-plus-lts-img21.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-r1-plus-lts-img21.png|600px]]</div>
 
<br>
 
<br>
 
9)After starting the development board, you can see the Log information output by the system from the opened serial port terminal
 
9)After starting the development board, you can see the Log information output by the system from the opened serial port terminal
<div style="padding-left:200px">[[文件:Orange-pi-3lts-putty4.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-putty4.png|600px]]</div>
  
 
==== '''How to use the debugging serial port on Windows platform''' ====
 
==== '''How to use the debugging serial port on Windows platform''' ====
Line 430: Line 430:
 
b.After entering the MobaXterm download page, click '''GET XOBATERM NOW!'''
 
b.After entering the MobaXterm download page, click '''GET XOBATERM NOW!'''
 
</div>
 
</div>
<div style="padding-left:200px">[[文件:Orange-pi-3lts-mobaxterm.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-mobaxterm.png|600px]]</div>
 
<br>
 
<br>
 
<div style="padding-left:20px;">
 
<div style="padding-left:20px;">
 
c.Then choose to download the Home version
 
c.Then choose to download the Home version
 
</div>
 
</div>
<div style="padding-left:200px">[[文件:Orange-pi-3lts-homeversion.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-homeversion.png|600px]]</div>
 
<div style="padding-left:20px;">
 
<div style="padding-left:20px;">
 
d.Then select the Portable version, after downloading, you don’t need to install it, just open it and you can use it
 
d.Then select the Portable version, after downloading, you don’t need to install it, just open it and you can use it
 
</div>
 
</div>
<div style="padding-left:200px">[[文件:Orange-pi-3lts-mobaxterm1.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-mobaxterm1.png|600px]]</div>
 
3)After downloading, use the decompression software to decompress the downloaded compressed package, you can get the executable software of MobaXterm, and then double-click to open it
 
3)After downloading, use the decompression software to decompress the downloaded compressed package, you can get the executable software of MobaXterm, and then double-click to open it
<div style="padding-left:200px">[[文件:Orange-pi-3lts-mobaxterm2.png|600px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-3lts-mobaxterm2.png|600px]]</div>
 
4)After opening the software, the steps to set up the serial port connection are as follows<br>
 
4)After opening the software, the steps to set up the serial port connection are as follows<br>
 
<div style="padding-left:20px;">
 
<div style="padding-left:20px;">
Line 450: Line 450:
 
e. Finally click the '''"OK"''' button to complete the setting
 
e. Finally click the '''"OK"''' button to complete the setting
 
</div>
 
</div>
<div style="padding-left:200px">[[文件:Orange-pi-r1-plus-lts-img22.png|1000px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-r1-plus-lts-img22.png|1000px]]</div>
 
5)After clicking the '''"OK"''' button, you will enter the following interface, and you can see the output information of the serial port when you start the development board.
 
5)After clicking the '''"OK"''' button, you will enter the following interface, and you can see the output information of the serial port when you start the development board.
<div style="padding-left:200px">[[文件:Orange-pi-r1-plus-lts-img20.png|1000px]]</div>
+
<div style="padding-left:200px">[[File:Orange-pi-r1-plus-lts-img20.png|1000px]]</div>
 
For more information on using the Orange Pi R1 Plus LTS, please see the [http://localhost:8080/index.php?title=%E6%96%87%E4%BB%B6:Orange_Pi_R1_Plus_LTS_User_Manual.docx  <span style="color:#ff003a;">Orange Pi R1 Plus LTS User Manual</span>]. (Click to download)
 
For more information on using the Orange Pi R1 Plus LTS, please see the [http://localhost:8080/index.php?title=%E6%96%87%E4%BB%B6:Orange_Pi_R1_Plus_LTS_User_Manual.docx  <span style="color:#ff003a;">Orange Pi R1 Plus LTS User Manual</span>]. (Click to download)

Revision as of 11:14, 27 June 2022

Basic features of Orange Pi R1 Plus LTS


What is Orange Pi R1 Plus LTS?


 Orange Pi R1 Plus LTS is an open source single-board computer, a new generation of arm-64 development board, it can run Android 9.0, Ubuntu, Debian and OpenWRT and other operating systems. Orange Pi R1 Plus LTS uses Rockchip rk3328 system-on-chip and has 1GB LPDDR3 memory

Purpose of Orange Pi R1 Plus LTS?


Typical Application:

  • A router
  • One switch


Of course there are other more functions, because Orange Pi is open source

Who’s it for?


 The Orange Pi development board is not only a consumer product, but also designed for anyone who wants to use technology to create and innovate. It is a very simple, interesting and practical tool, you can use it to create the world around you

Hardware features of Orange Pi R1 Plus LTS


Hardware Specification introduction
CPU

Rockchip RK3328
Quad-core ARM Cortex-A53 64-bit processor,
main frequency speeds up to 1.5GHz

GPU

Mali-450MP2
Supports OpenGL ES 1.0/2.0

Power management chip RK805
Memory (SDRAM) 1GB LPDDR3( shared with GPU)
Onboard Storage
  • Micro-SD Card slot
  • 16MB SPI Flash
Onboard Network
  • 10M/100M/1000M Ethernet (YT8531C)
  • 10M/100M/1000M USB Ethernet (RTL8153B)
Video Output TV CVBS output(Via 13pin interface board)
Audio output 3.5mm audio port(Via 13pin interface board)
Power Source USB Type C interface 5V2A input
USB 1x USB 2.0 HOST
Low-level peripherals 13pin header with IR pin、Tv-out、AUDIO(no MIC) 2xUSB2.0(not support)and 1 GPIO port
Debug serial port UART-TX、UART-RX and GND
Button 1x Reset Button
Fan interface 1x cooling fan interface (5V)
LED Power led & Status led
IR receiver Support IR remote control (via 13pin interface board)
Supported OS Android 9、Ubuntu、Debian、OpenWRT
Appearance specification introduction
Dimension 56mm×57mm
Weight 30.5g
Orange-pi-small-logo.pngOrange Pi™ is a trademark of the Shenzhen Xunlong Software CO., Limited


Top view and Bottom view of Orange Pi R1 Plus LTS


Top View:

Orange-pi-r1-plus-lts-img1.png


Bottom View:

Orange-pi-r1-plus-lts-img2.png


Orange Pi R1 Plus LTS interface details


Orange-pi-r1-plus-lts-img3.png


Orange-pi-r1-plus-lts-img4.png


Introduction to use the development board


Prepare the necessary accessories


1)TF card, a high-speed card of class 10 or higher with a minimum capacity of 8GB, it is recommended to use SanDisk TF card. Orange Pi tests are all SanDisk TF cards. Other brands of TF cards may cause the system to fail to start.

Orange-pi-one-img4.png


2)TF card reader, used to read and write TF card

Orange-pi-3-lts-tfcard.png


3)Power adapter, 5V/2A or 5V/3A high-quality Type C interface power adapter

Orange-pi-r1-plus-lts-img5.png


4)13pin interface board
 a.The actual interface board is shown below

Orange-pi-r1-plus-lts-img6.png


 b.The way to insert the interface board into the development board is as follows, remember not to insert it backwards

Orange-pi-r1-plus-lts-img7.png


 c.The 13pin header on the Orange Pi R1 Plus LTS development board can be connected to the interface board to expand the functions that are not on the development board. The functions included in the interface board are:

1 microphone not support
2 Analog audio and video output interface Connect TV through AV cable to output analog audio and video signals (Android system only)
3 USB2.0 x 2 not support
4 IR receiving function Android system can be controlled by IR remote control

 d.The schematic diagram of the 13pin header of Orange Pi R1 Plus LTS is shown below

Orange-pi-r1-plus-lts-img8.png


5)CPU fan, used to dissipate heat to the CPU, the interface voltage is 5V, the interface specification is 2pin, 1.5mm spacing

Orange-pi-r1-plus-lts-img9.png


6)IR remote control, mainly used to control Android system

Orange-pi-pc-plus-img4.png


7)100M or 1000M network cable, used to connect the development board to the Internet

8)AV video cable, used to connect the development board to the TV through the CVBS interface to display video (only available for Android System)

Orange-pi-pc-plus-img5.png


9)USB to TTL module and DuPont cable, when using the serial port debugging function, you need USB to TTL module and DuPont cable to connect the development board and the computer

Orange-pi-r1-plus-lts-img10.pngOrange-pi-lite-img10.png


10)A personal computer with Ubuntu and Windows operating systems

1 Ubuntu18.04 PC Optional, used to compile Linux, Android and OpenWRT source code
2 Windows PC Used to burn Android, Linux and OpenWRT images


Download the image and related information of the development board


1)The download URL of the Chinese version is:

 http://www.orangepi.cn/downloadresourcescn/

Orange-pi-r1-plus-lts-img11.png


2)The download URL of the English version is:

 http://www.orangepi.org/downloadresources/

Orange-pi-r1-plus-lts-img11.png


3)The information mainly contains

a.Android source code: saved on Baidu Cloud Disk and Google Cloud Disk
b.Linux source code: saved on github, the link address is

 https://github.com/orangepi-xunlong

c.OpenWRT source code: saved on github, the link address is

 https://github.com/orangepi-xunlong/openwrt

d. User manual and schematic diagram: chip related data manual will also be placed here
e. Official tools: mainly include the software needed in the use of the development board
f. Android image: saved on Baidu Cloud Disk and Google Cloud Disk
g. Ubuntu image: saved on Baidu Cloud Disk and Google Cloud Disk
h. Debian image: saved on Baidu Cloud Disk and Google Cloud Disk
i. OpenWRT image: saved on Baidu Cloud Disk and Google Cloud Disk


Method to burn Linux image or OpenWRT image to TF card based on Windows PC


1)The method of burning OpenWRT image based on Windows PC is the same as the method of burning Linux image. The following is an example of burning Linux image

2)First, prepare a TF card with 8GB or larger capacity. The transmission speed of the TF card must be above class10. It is recommended to use a TF card of SanDisk and other brands

3)Then use the card reader to insert the TF card into the windows computer

4)Then format the TF card

a.You can use the SD Card Formatter software to format the TF card, the download address is

 https://www.sdcard.org/downloads/formatter/eula_windows/SDCardFormatterv5_WinEN.zip

b.After downloading, unzip and install directly, and then open the software

c.If the computer only has a TF card inserted, the TF card's drive letter will be displayed in the Select card column. If the computer has multiple USB storage devices inserted, you can select the drive letter corresponding to the TF card through the drop-down box

Orange-pi-3lts-sdcardformatter.png

d.Then click Format, a warning box will pop up before formatting, and formatting will start after selecting "Yes (Y)"

Orange-pi-3lts-sdcardformatter1.png

e.After formatting the TF card, the message shown in the figure below will pop up, click OK

Orange-pi-3lts-sdcardformatter2.png

5)Download the Linux operating system image file compression package you want to burn from the Orange Pi data download page, and then use the decompression software to decompress it. In the decompressed file, the file ending with ".img" is the operating system image file,the size is generally above 1GB.

6)Use Win32Diskimager to burn Linux image to TF card

a.The download page of Win32Diskimager is

 http://sourceforge.net/projects/win32diskimager/files/Archive/

b.Install directly after downloading, the interface of Win32Diskimager is shown below

a)First select the path of the image file
b)Then confirm that the drive letter of the TF card is the same as that displayed in the "Device" column
c)Finally click "Write" to start burning

Orange-pi-3lts-selectimage.png

c.After the image writing is completed, click the "Exit" button to exit, and then you can pull out the TF card and insert it into the development board to start

Method of flashing Linux image or OpenWRT image to TF card based on Ubuntu PC


1)The method of flashing OpenWRT image based on Ubuntu PC is the same as that of flashing Linux image. The following is an example of flashing Linux image

2)First, prepare a TF card with 8GB or larger capacity. The transmission speed of the TF card must be above class10. It is recommended to use a TF card of SanDisk and other brands

3)Then use a card reader to insert the TF card into the computer

4)Download balenaEtcher software, the download address is

 https://www.balena.io/etcher/

5)After entering the balenaEtcher download page, please select the Linux version of the software through the drop-down box to download

Orange-pi-3lts-selectlinuxversion.png


6)After downloading, use unzip to decompress. The decompressed balenaEtcher-1.5.109-x64.AppImage is the software needed to burn Linux image

test@test:~$ unzip balena-etcher-electron-1.5.109-linux-x64.zip
Archive: balena-etcher-electron-1.5.109-linux-x64.zip
inflating: balenaEtcher-1.5.109-x64.AppImage
test@test:~$ ls
balenaEtcher-1.5.109-x64.AppImage balena-etcher-electron-1.5.109-linux-x64.zip


7)Download the Linux operating system image file compression package you want to burn from Orange Pi's data download page, and then use the decompression software to decompress it. In the decompressed file, the file ending with ".img" is the operating system image file. The size is generally above 1GB
a.The decompression command of the compressed package at the end of 7z is as follows

test@test:~$ 7z x Orangepir1plus-lts_2.1.4_ubuntu_bionic_server_linux5.10.44.7z
test@test:~$ ls Orangepir1plus-lts_2.1.4_ubuntu_bionic_server_linux5.10.44.*
Orangepir1plus-lts_2.1.4_ubuntu_bionic_server_linux5.10.44.7z
Orangepir1plus-lts_2.1.4_ubuntu_bionic_server_linux5.10.44.img.sha #Checksum file
Orangepir1plus-lts_2.1.4_ubuntu_bionic_server_linux5.10.44.img # image file


8)After decompressing the image, you can first use the sha256sum -c *.sha command to calculate whether the checksum is correct. If it is prompted that the downloaded image is correct, you can safely burn it to the TF card. If the checksum does not match, it indicates There is a problem with the downloaded image, please try to download again

test@test:~$ sha256sum -c *.sha
Orangepir1plus-lts_2.1.4_ubuntu_bionic_server_linux5.10.44.img: Success

9)Then double-click balenaEtcher-1.5.109-x64.AppImage on the graphical interface of Ubuntu PC to open balenaEtcher (no installation required), the opened interface is shown in the figure below

a. First select the path of the linux image file
b. Then select the device number of the TF card
c. Finally click Flash to start burning

Orange-pi-3lts-balenaetcher.png

10)The writing speed and remaining time will be prompted during the burning process

Orange-pi-3lts-balenaetcher1.png

11)After burning, the following interface will be displayed. At this time, you can unplug the TF card from the computer and insert it into the development board to start.

Orange-pi-3lts-balenaetcher2.png

Method of flashing Android firmware to TF card


Android image can only be burned to TF card using SDDiskTool software under Windows platform, and cannot be burned under Linux platform

1)First prepare a TF card with 8GB or larger capacity. The transmission speed of the TF card must be above class10. It is recommended to use a TF card of SanDisk and other brands

2)Then use a card reader to insert the TF card into the computer

3)Download Android 9.0 firmware and SDDiskTool burning tool from Orange Pi's data download page

4) Use the decompression software to decompress the downloaded Android firmware compressed package. In the decompressed file, the file ending with ".img" is the Android firmware

5) Use decompression software to decompress SDDiskTool_v1.59, this software does not need to be installed, find SD_Firmware_Tool in the decompressed folder and open it

Orange-pi-r1-plus-lts-img12.png


6)After opening SD_Firmware_Tool, if the TF card is recognized normally, the name and capacity of the TF card will be displayed when the removable disk device is selected. Please make sure that the displayed TF card device information is consistent with the device information of the TF card you want to burn. There is no display, you can try to unplug the TF card

Orange-pi-r1-plus-lts-img13.png

7)After confirming the device information, start writing the Android firmware to the TF card

a. First check "SD start" in the "Select function mode" column
b. Select the path of Android image in "Select Firmware Upgrade"
c. Then click the "Start Create" button

Orange-pi-r1-plus-lts-img14.png


d.After clicking "Start to create", a warning box will pop up, select "Yes (Y)" to start burning

Orange-pi-r1-plus-lts-img15.png


e.After starting to burn, the partition currently being burned will be displayed below

Orange-pi-r1-plus-lts-img16.png


8)After burning, the display of SD_Firmware_Tool is as shown in the figure below. At this time, click the OK button to close SD_Firmware_Tool, and then you can unplug the TF card from the computer and insert it into the development board to start

Orange-pi-r1-plus-lts-img17.png

Start the Orange Pi development board


1)Insert the burned TF card into the TF card slot of the Orange Pi development board
2) The development board has an Ethernet port, which can be plugged into a network cable for Internet access
3)Connect a 5V/2A (5V/3A is also available) high-quality power adapter

a.Remember not to plug in the 12V power adapter, if you plug in the 12V power adapter, it will burn the development board
b.Many unstable phenomena during system power-on and startup are basically caused by power supply problems, so a reliable power adapter is very important

4)If you want to view the output information of the system through the debug serial port, please use the USB to TTL module and DuPont cable to connect the development board to the computer. For the connection method of the serial port, please refer to the section on the use of the debug serial port
5)Then turn on the switch of the power adapter, if everything is normal, the serial terminal can see the output log of the system startup at this time

How to use the debug serial port

Debug serial port connection instructions

1)First, you need to prepare a USB to TTL module. This module can be bought in Orange Pi Store. If there are other similar USB to TTL modules, you can also insert the USB port of the USB to TTL module into the USB of the computer Interface

Orange-pi-one-img9.png

2)The corresponding relationship between the debug serial port GND, TX and RX pins of the development board is shown in the figure below

Orange-pi-r1-plus-lts-img18.png

3)The GND, TX and RX pins of the USB to TTL module need to be connected to the debug serial port of the development board through a Dupont cable

a. Connect the GND of the USB to TTL module to the GND of the development board
b. Connect the RX of the USB to TTL module to the TX of the development board
c. Connect the TX of the USB to TTL module to the RX of the development board


4)The schematic diagram of connecting the USB to TTL module to the computer and the Orange Pi development board is shown below

Orange-pi-3lts-ttlmodule2.png


5)If you are using a CP2102 USB to TTL module, under the condition of a baud rate of 1.500000, some systems may encounter garbled or unusable problems. The specific test situation is as follows

USB to TTL module model Host system Support situation
CH340 win7 ok
win10 ok
ubuntu14.04 ok
ubuntu18.04 ok
ubuntu20.04 ok
CP2102 win7 ok
win10 Not available
ubuntu14.04 ok
ubuntu18.04 Not available
ubuntu20.04 Not available


How to use the debugging serial port on Ubuntu platform

1)If the USB to TTL module is connected normally, you can see the corresponding device node name under /dev of the Ubuntu PC, remember this node name, it will be used when setting the serial port software later

test@test:~$ ls /dev/ttyUSB*
/dev/ttyUSB0


2)There are many serial debugging tools that can be used under linux, such as putty, minicom, etc. The following demonstrates how to use putty

3)First install putty on the Ubuntu PC

test@test:~$ sudo apt update
test@test:~$ sudo apt -y install putty


4)Then run putty, remember to add sudo permissions

test@test:~$ sudo putty


5)After executing the putty command, the following interface will pop up

Orange-pi-3lts-putty.png


6)First select the setting interface of the serial port

Orange-pi-3lts-putty1.png

7)Then set the parameters of the serial port

a. Set the Serial line to connect to to /dev/ttyUSB0 (modify to the corresponding node name, generally /dev/ttyUSB0)
b. Set Speed (baud) to 1500000 (baud rate of the serial port)
c. Set Flow control to None

Orange-pi-r1-plus-lts-img19.png

8)After setting the serial port setting interface, return to the Session interface

a. First select the Connection type as Serial

b. Then click the Open button to connect to the serial port
Orange-pi-r1-plus-lts-img21.png


9)After starting the development board, you can see the Log information output by the system from the opened serial port terminal

Orange-pi-3lts-putty4.png

How to use the debugging serial port on Windows platform


1)There are many serial debugging tools that can be used under Windows, such as SecureCRT, MobaXterm, etc. The following shows how to use MobaXterm. This software is free and can be used without purchasing a serial number.

2)Download MobaXterm

a.Download the MobaXterm URL as follows

 https://mobaxterm.mobatek.net/

b.After entering the MobaXterm download page, click GET XOBATERM NOW!

Orange-pi-3lts-mobaxterm.png


c.Then choose to download the Home version

Orange-pi-3lts-homeversion.png

d.Then select the Portable version, after downloading, you don’t need to install it, just open it and you can use it

Orange-pi-3lts-mobaxterm1.png

3)After downloading, use the decompression software to decompress the downloaded compressed package, you can get the executable software of MobaXterm, and then double-click to open it

Orange-pi-3lts-mobaxterm2.png

4)After opening the software, the steps to set up the serial port connection are as follows

a. Open the session setting interface
b. Select the serial port type
c. Select the port number of the serial port (choose the corresponding port number according to the actual situation), if you can't see the port number, please use the 360 driver master to scan and install the USB to TTL serial chip driver
d. Select the baud rate of the serial port to be 1500000
e. Finally click the "OK" button to complete the setting

Orange-pi-r1-plus-lts-img22.png

5)After clicking the "OK" button, you will enter the following interface, and you can see the output information of the serial port when you start the development board.

Orange-pi-r1-plus-lts-img20.png

For more information on using the Orange Pi R1 Plus LTS, please see the Orange Pi R1 Plus LTS User Manual. (Click to download)