Changes

　a.The actual interface board is shown below

<br>

[[File:Orange-pi-r1-plus-lts-img6.png|250px]]

</div>

　b.The way to insert the interface board into the development board is as follows, remember not to insert it backwards

<br>

[[File:Orange-pi-r1-plus-lts-img7.png|250px]]

</div>

6)IR remote control, mainly used to control Android system<br>

<br>

[[File:Orange-pi-pc-plus-img4.png|250px]]

</div>

8)AV video cable, used to connect the development board to the TV through the CVBS interface to display video (only available for Android System)<br>

<br>

[[File:Orange-pi-pc-plus-img5.png|250px]]

</div>

<br>

c.If the computer only has a TF card inserted, the TF card's drive letter will be displayed in the Select card column. If the computer has multiple USB storage devices inserted, you can select the drive letter corresponding to the TF card through the drop-down box<br>

d.Then click Format, a warning box will pop up before formatting, and formatting will start after selecting "Yes (Y)"

e.After formatting the TF card, the message shown in the figure below will pop up, click OK<br>

</div>

5)Download the Linux operating system image file compression package you want to burn from the Orange Pi data download page, and then use the decompression software to decompress it. In the decompressed file, the file ending with ".img" is the operating system image file,the size is generally above 1GB.<br>

c)Finally click '''"Write"''' to start burning

</p>

c.After the image writing is completed, click the "Exit" button to exit, and then you can pull out the TF card and insert it into the development board to start

</div>

b. Select the path of Android image in "Select Firmware Upgrade"<br>

c. Then click the "Start Create" button<br>

<br>

d.After clicking "Start to create", a warning box will pop up, select "Yes (Y)" to start burning

<br>

e.After starting to burn, the partition currently being burned will be displayed below

<br>

</div>