6,556
edits
Changes
no edit summary
|}
<br>
<div style="display:flex;padding-left:200px ;">
<div style="text-align:center;">
[[File:Orange-pi-pc2-img9.png|200px200px|]]<br>
</div>
<br>
<div style="display:flex;padding-left:200px ;">
<div style="text-align:center;">
[[File:Orange-pi-r1-img-4.png|100px|]]<br>
</div>
c.Download the operating system image file from the download page, the page address is as following:<br>
http://www.orangepi.org/downloadresourceshtml/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-Zero-Plus.html<br>
d.Unzip the downloaded file (in addition to the Android system, this method can be used to burn to write, the Android system need another burn, the following will introduce)<br>
e.Right click to download the file, select "Unzip file" to write image to TF card
<br>
c.Download the OS image from download page <br>
http://www.orangepi.org/`downloadresourceshtml/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-Zero-Plus.html<br>
<br>
d.Unzip and right click the downloaded file, select " Unzip file"<br>
https://drive.google.com/file/d/0B_VynIqhAcB7NTg2UkRDdHRWX2s/edit?usp=sharing<br>
Download Android OS image from here: <br>
http://www.orangepi.org/downloadresourceshtml/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-Zero-Plus.html<br>
b.Format the TF card<br>
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img15.png|400px|]]</div>
<br>
c.Please make sure the inserted TF card is in accordance with the chosen TF card, click "format to normal" button for TF card formatting.<br>
<br>
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img16.png|600px|]]</div>
<br>
d.Click "OK" button after successfully formatted the TF card to normal.<br>
e.Burn the Android OS image into your TF card. Please pay attention to the following with red marks.<br>
<br>
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img17.png|600px|]]</div>
<br>
f.Click "Burn" button for writing to TF card and wait for it finish<br>
<br>
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img18.png|600px|]]</div>
<br>
g.Click "Exit" button after burn Android image to TF card successfully.<br>
<br>
<br>
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img19.png|400px|]]</div>
<br>
ii. Select the image file path that has been unzipped<br>
<br>
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img20.png|600px|]]</div>
<br>
iii. Click "start" button and wait for the image to write.<br>
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img21.png|600px|]]</div>
<br>
<br>
'''1)Hardware Connection'''<br>
<br>
<div style="padding-left:200px ;">
[[File:Orange-pi-plus-2e-img10.png|400px|]]<br>
<div style="width:400px;text-align:center;">Orange Pi Zero Plus runs on Android 5.1 system</div>
</div>
<br>
<div style="padding-left:200px ;">
[[File:Orange-pi-plus-2e-img11.png|400px|]]<br>
<div style="width:400px;text-align:center;">Orange Pi Zero Plus runs on Debian system</div>
</div>
<br>
<div style="padding-left:200px ;">
[[File:Orange-pi-plus-2e-img12.png|400px|]]<br>
<div style="width:400px;text-align:center;">Orange Pi Zero Plus runs on Ubuntu system</div>
* Modify ssh configuration file /etc/ssh/sshd_config
<br>
<div style="padding-left:200px ;">
[[File:Orange-pi-pc2-img28.png|400px|]]
</div>
* Check the IP with ifconfig, login via ssh of root user
<br>
<div style="padding-left:200px ;">
[[File:Orange-pi-pc2-img29.png|600px|]]
</div>
a.Use root account to login Orange Pi(please note that do not login with the account of orangepi)<br>
b.$ usermod -l zhangsan orangepi Change orangepi account into Zhangsan
<div style="padding-left:100px; ">
[[File:Orange-pi-pc2-img30.png|400px|]]
</div>
c.$ groupmod -n zhangsan orangepi Change group
<div style="padding-left:100px; ">
[[File:Orange-pi-pc2-img31.png|400px|]]
</div>
http://luyou.xunlei.com/thread-12545-1-1.html. <br>
Download Xware1.0.31_cubieboard zip file.
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img38.png|800px|]]</div>
<br>
Note: If you want to try the latest version, you can download the latest test version: http://luyou.xunlei.com/thread-15167-1-1.htm.<br>
i $ cd /xxx/xunlei The xxx is the directory of installation file of xunlei<br>
ii $ sudo nano thunder_mounts.cfg Modify the download path
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img42.png|400px|]]</div>
<br>
iii chmod +x etm_monitor<br>
<br>
Enter into the system and extend via shell Before partition
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img43.png|400px|]]</div>
<br>
Eneter into system and expend via resize_rootfs.sh
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img44.png|400px|]]</div>
<br>
Enter resize_rootfs.sh on command line, the system will expending automatically,
Reboot the system and use df -lh to check whether expending is successful
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img45.png|400px|]]</div>
<br>
a.Expand file system<br>
This manual describes how to use the binary file to speed up the development of the project.<br>
Hardware: Orange Pi development board*1, Card reader*1, TF card*1, power supply*1
<div style="padding-left:200px ;">[[File:Orange-pi-zero-plus-img4.png|800px|]]</div>
<br>
Note: In the following sections, * indicates wild-cards, you need to fill in the actual values according to their file storage path.<br>
<br>
You could download the source code from the official website:<br>
http://www.orangepi.org/downloadresourceshtml/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-Zero-Plus.html<br>
Subsection and compress the file, then unzip it after finish downloaded:
<div style="padding-left:200px ;">[[File:Orange-pi-r1-img-9.png|600px|]]</div>
<br>
buildroot: Project compilation script<br>
At this point the system will prompt the choice of the chip, as shown below, for OrangePi, select sun50iw2p1<br>
At this point, the system will be prompted the choice of the board, for the OrangePi, select dragonboard，dolphin and dolphin-p2<br>
<div style="padding-left:200px ;">[[File:Orange-pi-zero-plus-img6.png|400px|]]</div>
<br>
Appear this interface indicates waiting for the compiler.
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img53.png|400px|]]</div>
<br>
Wait fifteen minutes or so, compile complete.
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img54.png|400px|]]</div>
<br>
libs： lichee/out/sun50iw2p1/android/common/lib/modules/3.10.65 <br>
Download image from official website：<br>
http://www.orangepi.org/downloadresourceshtml/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-Zero-Plus.html<br>
<br>
* Write the image：<br>
<br>
Execute./build.sh enter into graphical interface and select Zero plus2, the interface for Zero Plus is same as Zero plus2
<div style="padding-left:200px ;">[[File:Orange-pi-zero-plus-img8.png|600px|]]</div>
<br>
Enter password of root
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img62.png|600px|]]</div>
<br>
Update Kernel directory and module
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img63.png|600px|]]</div>
<br>
Select corresponding file directory and update uImage and modules
<div style="padding-left:200px ;">[[File:Orange-pi-pc2-img64.png|600px|]]</div>
<br>
<br>
Hardware: Orange Pi development board*1, Card reader*1, TF card*1, power supply*1
<div style="padding-left:200px ;">[[File:Orange-pi-zero-plus-img4.png|800px|]]</div>
<br>
Software<br>
Version 3.81-3.82 of GNU Make; <br>
Version 1.7 or higher version of Git.<br>
<br>
=== '''Install JDK''' ===
<div>[[File:Orange-pi-pc2-img68.png|800px|]]</div>
<br>
* Command line input Jav and press tab to see whether it can auto completion (Java), which indicates it can successfully installed version 1version1.76.<br>
<br>
=== '''Download Android Source Package''' ===
<br>
Download website(source code is same for all boards of H3 chip): <br>http://www.orangepi.org/downloadresourceshtml/ hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-Zero-Plus.html<br><br>Unzip the download file Then you will obtain the following directories:<br><div style="padding-left:200px ;">[[File:Orange-pi-pc2-img69.png|300px|]]</div>
<br>
<br>
$ pack #Packaged into firmware
<div>[[File:Orange-pi-plus-2e-img24.png|600px|]]</div>
<br>
$ cd */lichee/tools/pack/
<div>[[File:Orange-pi-plus-2e-img25.png|600px|]]</div>
<br>
$ cd ./lichee<br>
$ cp ./tools/pack/chips/sun50iw2p1/configs/dolphin-p1/sys_config.fex ./ <br>
<br>
<br>
Hardware: Orange Pi development board*1, Card reader*1, TF card*1, power supply*1
<div style="padding-left:200px ;">[[File:Orange-pi-primezero-plus-img15img4.png|600px]]</div>
<br>
=== '''Device driver and application programming''' ===
=== '''Compile device driver''' ===
<br>
Copy the OrangePi_misc.c to the directory of :<br><nowiki>*/lichee/linux-3.10/driver/misc</nowiki>directory:<br>
<div>[[File:Orange-pi-pc2-img83.png|800px]]</div>
<br>
Enter to */lichee/linux-3.10/drivers/misc/, and modify makefile<br>
<div>[[File:Orange-pi-pc2-img84.png|800px]]</div>
<br>
Modify Makefile on currently file, shown as following:
<div>[[File:Orange-pi-i96-img53.png|800px]]</div>
<div>[[File:Orange-pi-prime-img16.png|400px]]</div>
<br>
There will be is a .ko file module which generated after compiled of OrangePi_misc.c on the directory of:<br>*/lichee/linux-3.10/output/lib/modules/3.10.65/<br>It is generated after OrangePi_misc.c compilation<div>[[File:Orange-pi-pc2-img88.png|800px]]</div><br>IInsert Insert U disk (please note the SD card should have been written image) if the SD card system is mounted to the directory / dev/ sdb, SD card will have two sub mount points, respectively are / dev / sdb1 and /dev/sdb2. Two partition of SD card will automatically mount to the PC /media/ directory, the first partition is the boot partition and the second partition is the rootfs partition.
<div>[[File:Orange-pi-i96-img55.png|800px]]</div>
<br>
<br>
Hardware: Orange Pi development board*1, Card reader*1, TF card*1, power supply*1
<div style="padding-left:200px ;">[[File:Orange-pi-primezero-plus-img15img4.png|800px]]</div>
<br>
'''TTL to USB cable'''
<div style="padding-left:200px ;">[[File:Orange-pi-i96-img67.png|800px]]</div>
<br>
=== '''Operations on Windows''' ===
* Open it after installed, shown as below:
<br>
<div style="padding-left:200px ;">[[File:Orange-pi-i96-img73.png|600px]]</div>
<br>
'''3)Connect method'''<br>
<br>
* Select control panel on Start menu
<div style="padding-left:200px ;">[[File:Orange-pi-i96-img75.png|400px]]</div>
<br>
<div style="padding-left:200px ;">[[File:Orange-pi-i96-img76.png|600px]]</div>
<br>
* Click on the device manager to check the port number
<div style="padding-left:200px ;">[[File:Orange-pi-i96-img77.png|400px]]</div><div style="padding-left:200px ;">[[File:Orange-pi-i96-img78.png|400px]]</div>
<br>
'''5)Putty configuration'''
<div style="padding-left:200px ;">[[File:Orange-pi-i96-img79.png|400px]]</div>
<br>
Serial port should set to the corresponding port number (COM5), the speed should set to 115200<br>
'''6)Start debug'''<br>
Power Orange Pi on and boot it, the serial port will automatic print out debug log.
<div style="padding-left:100px; ">[[File:Orange-pi-i96-img80.png|600px]]</div>
<br>
set window 5
</div>
<div style="padding-left:200px ;">[[File:Orange-pi-i96-img83.png|600px]]</div>
<br>
'''2)Connect method for debug'''
<br>
$ ls /dev/ (Input command in the PC terminal to check the device number of TTL to the serial cable)
<div style="padding-left:100px; ">[[File:Orange-pi-i96-img85.png|800px]]</div>
<br>
* It can be seen from the figure that TTL to the serial port cable is identified as ttyUSB0, configure the /ect/kermit/kermitc file, update the serial port information.<br>
$ sudo vi /etc/kermit/kermitc
* Set the value of setline into /dev/ttyUSB0
<div style="padding-left:100px; ">[[File:Orange-pi-i96-img86.png|800px]]</div>
<br>
'''4)Start debug'''
* Input command in the host computer terminal, enter the Kermit mode:
$ sudo kermit –c
<div style="padding-left:100px; ">[[File:Orange-pi-i96-img87.png|800px]]</div>
<br>
* Power on and boot OrangePi, the serial port will print debug log automatically
<br>
== '''Download the Orange Pi Zero Plus User Manual''' ==<br>For more information on using the Orange Pi PrimeZero Plus, please see the [https://drive.google.com/open?id=1bfnUh1yQYXn4IQTU9xEh3Lmxu2AsxEJ0 <span style="color:red;">Orange Pi Prime Zero Plus User Manual</span>]. (Click to download)