View: 663|Reply: 2

Seating Orange pi 5 plus eMMC

[Copy link]

1

threads

3

posts

27

credits

Novice

Rank: 1

credits
27
Published in 2023-10-9 12:41:52 | Show all floors |Read mode
I don't know what I'm doing wrong but the eMMC just won't seat. I turn the board upside down and the eMMC just falls off. Please help.

1

threads

3

posts

27

credits

Novice

Rank: 1

credits
27
 Author| Published in 2023-10-10 03:25:33 | Show all floors
This post was finally edited by Destineal at 2023-10-10 03:28

This is all so frustrating to me. I'm off to such a bad start with Orange Pi. 1st I couldn't get the eMMC connected to the board. I bought the official Pi 5 case, the official heatsink, and the official Wi-Fi adapter card for the pi 5 plus. the heatsink is not compatible with the official pi 5 plus case because the case IS a passive heatsink, It has NO space for another heatsink. Orange pi really should show a picture of the case interior on the case's overview page. The antennas that came with the case will not mate to the Wi-Fi card no matter how hard I try. The antennas that came with the Wi-Fi card will connect to the card, but the wires aren't long enough to justify using them with the official case

1

threads

3

posts

27

credits

Novice

Rank: 1

credits
27
 Author| Published in 2023-10-10 18:39:25 | Show all floors
I've given up on the seating the eMMC, but I was able to get the antennas connected by removing the wifi card from the pi to connect them.
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list