No USB suport, for FTDI devices.

andreisky

I have a smart card reader with FTDI chip and doesn't connect/work. My board is Orange PI PC, root@OrangePI:~# cat /etc/debian_version

7.8

root@OrangePI:~# lsb_release -a

No LSB modules are available.

Distributor ID:        Debian

Description:        Debian GNU/Linux 7.8 (wheezy)

Release:        7.8

Codename:        wheezy

I have tried to put the drivers from FTDI but wit no luck, i get the same message, there is something wrong with the Orange PI PC is not compatible with USB  FTDI drivers?


Error: could not insert module /lib/modules/3.4.39/kernel/drivers/usb/serial/ftdi_sio.ko: Invalid module format


When i type: " lsusb " i see the device

Bus 007 Device 003: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC


When i'm traing to acces the device :


(reader) NO1-  [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=19 No such device)

zgoda

Invalid module format message means usually wrong platform/abi. If this driver module is open source you could try to build it for ARMv7.

andreisky

I really don't know how to build for armv7 this FTDI driver.

zgoda

Get sources and read README file. There should be some build instructions somewhere, perhaps Google could help?

aali

I would like to thank you for the efforts you’ve put in writing this web site. I am hoping the same high-grade web site post from you in the upcoming as well. Actually your creative writing abilities has inspired me to get my own blog now. Really the blogging is spreading its wings quickly. Your write up is a great example of it.        Mẹo chơi nổ hũ VIN777

aali

It's always equally an exceptional write-up it's my job to undeniably appreciated checking out. It is far from conclusively day-to-day it's my job to improve the way to determine just about anything.        ZEN CORTEX REVIEW