Orangepi2/plus2/PC H3 Linux mainline support

tpickle

1. Prepare SD card
   
2. <NEED SUDO PRIVLEDGES or remove sudo and run as root>
   
3. 
   
4. echo -e "n\np\n1\n2048\n+15M\nn\np\n2\n32768\n+240M\np\nw" | sudo fdisk /dev/<CARD_LOCATION> && sudo mkfs.vfat /dev/<CARD_LOCATION>1

Copy code

I am going to try this, this weekend if anyone else wants to report back, and let me know if it format your SD card and created two partitions.

constantius

Orangepi Zero 2 ( Allwinner H616 )
Are Linux Ubuntu 18.04 and Deabian 10 images 32 bit? 64BIT and the GUI system is not usable. I mean imageas which are on download site.

spiceagent11

For the CSI I have only found a patch for the clock. Did someone have more ? This is of special interest for me because on my design a use a FPGA to convert the MIPI CSI-2 two lanes of a image sensor into the DVP signals accepted by the H3 and this have obvious implication on the code used to configure the sensor by I2C. So If a get a chance to hack on a code that is likely hit the mainline, I will probably save time.

Johnson007