please choosego to mobile | Continue to access the PC version
View: 1214|Reply: 0

OPI 5+ booting from SSD

[Copy link]

1

threads

8

posts

19

credits

Novice

Rank: 1

credits
19
Published in 2023-10-12 01:42:21 | Show all floors |Read mode
I have a OPI 5+ and a JMicron JMB585 PCIe controller with 5 sata ports. I have one SSD connected to the SATA controller and it works fine and I can write to the SSD.

I just can't get the OPI 5+ to boot from the SSD.

I searched the forum for similar issues and can see that there are several that has similar issues, but nothing that I haven't tried. I see that there are some people who can get it to work and some that can't. I know that NVME is supported by the nand-sata-install, but also regular non NVME M.2 SSD's should be able to work.

I have:
*Cleared the SPI flash and written it with nand-sata-install.
*Flashed the SD-card and the SSD from the same image and they have the same UUID's.
*Written sata bootloader to SPI with sudo dd if=/usr/share/orangepi5/rkspi_loader_sata.img of=/dev/mtdblock0 && sudo sync
*Inserted overlays=ssd-sata on both SD-card and SSD

I have followed both these recommandations:
https://www.crosstalksolutions.c ... ation-with-m-2-ssd/
https://www.reddit.com/r/OrangeP ... 5_from_sata_m2_ssd/

Whenever I start the OPI 5+ with only the SSD and no SD-card, it doesn't boot, no blinking from the LED.

Similar issues:
http://www.orangepi.org/orangepi ... &extra=page%3D2
http://www.orangepi.org/orangepi ... &extra=page%3D4
http://www.orangepi.org/orangepi ... page%3D6&page=1
http://www.orangepi.org/orangepi ... nge%2Bpi%2B5%2Bboot



You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list