Orange Pi Heart concept recommendation

vanicstech · Published in 2016-7-15 14:04:01

Hi all,

My name is Alex, I am an engineer with background in digital hardware design and embedded firmware development.
Sometime we need a Linux board that needs pins which are not accessable on any of the curent Orange pi versions so designing a cape for orange pi becomes out of question. For example, you do not have access to audio codec pins to add a 4ohm speaker driver and so on. you also do not have any freedom on the position of connectors. On the other hand it is almost impossible for many to make a Linux board, with BGA ram, micro, and other components for $10-$15.
I want to recommend design of a new board based on Orange Pi Plus with same H3 microcontroller, 1 GB ram, and 8GB emmc (but with no audio, power, USB, HDMI, and Ethernet connectors). On the write hand side the board should keep the same 40 pins raspberry pi compatible connector and on the left it should have another 40 (or so) pins connector for accessing all the H3 functionalities and pins like codec, HDMI, USB, etc.
For a designer, prosessing power is important and it would be a great convenience and cost savor, if she can get this through a verified working board like I explained. For instance, one can design a 2 layer cape for "Orange Pi heart" and have highest costomization abiltiy.
The reason that I am saying this here is because Orange pi organisation has the production capability to produce it at a very competative price.
I hope orange pi organization sees the value and produces such a board and if they do I will be a loyal customer. I can design the baord or help with desinging it too as an open source hardware.

Please share your opinions to see where this attempt goes.

Best regards,

-Alex

koreshx · Published in 2016-7-20 05:29:31

Edited by koreshx at 2016-7-20 05:43

Good idea. But there are some difficulties in achieving the goal.
It's not a mass product. Are you sure market requirements will be enough? If a board contains two large pins header it will be absolutely not interesting for electronics producers (too much excess space). If a board contains only solder pads instead of pins header it might be interesting for electronics producer but the board will be much more complex (because of one side mountung) and it will not be interesting for amateurs (I'm not sure everybody can create the correct two layers board to connect interfaces with differential pairs).

On the other hand it is almost impossible for many to make a Linux board, with BGA ram, micro, and other components for $10-$15

I'm sure, it is real for a 500-1000pcs batch.

koreshx · Published in 2016-7-20 05:42:42

I can suggest designing opensource 6-layers core board fragment with cpu, ddr3 and basic power. It will be a reusable base schematic with correct high speed layout (for a specified layer stackup). 6layer boards are not very expensive.

vanicstech · Published in 2016-7-22 08:33:36

Core schematics is interesting idea. The problem is not on the design side but is on manufacturing side with prices comparable to orange pi.
The cost of 6-layer pcb with assembly of BGA components is high. I think I should start a kickstarter project to see the support of developers:-)

comewe7091 · Published in 2024-2-11 20:18:39

A lot of thanks for every one of your work on this web site. Debby really loves making time for internet research and it’s really obvious why. My spouse and i know all of the dynamic tactic you convey great tips through your blog and as well foster contribution from website visitors on this area of interest and our girl is always starting to learn a lot. Have fun with the rest of the new year. Your carrying out a very good job. 청량리출장마사지

comewe7091 · Published in 2024-2-11 21:46:54

Thanks for sharing this article. Discovered your website through a friends blog – very informative and entertaining. 검단출장

xcvfyuik · Published in 2024-2-22 17:31:11

Hey! This is my first visit to your blog! We are a team of volunteers and starting a new initiative in a community in the same niche. Your blog provided us valuable information to work on. You have done a outstanding job! [url= http://63.250.38.170/download/]http://63.250.38.170/download/[/url]

secosek502 · Published in 2024-2-23 00:10:04

Pretty good post. I have just stumbled upon your blog and enjoyed reading your blog posts very much. I am looking for new posts to get more precious info. Big thanks for the useful info. Sugar Defender

secosek502 · Published in 2024-2-23 21:03:35

This web-site is really a walk-through it really is the details you desired about it and didn’t know who to question. Glimpse here, and you’ll absolutely discover it. Indosloters

xcvfyuik · Published in 2024-2-24 15:54:48

The looks really great. Most of these smaller details are usually created employing wide range of heritage knowledge. I would like all of it substantially. slot gacor