please choosego to mobile | Continue to access the PC version
View: 4111|Reply: 1

PC-Plus - emmc not accessible/visible

[Copy link]

1

threads

2

posts

17

credits

Novice

Rank: 1

credits
17
Published in 2017-1-4 18:44:54 | Show all floors |Read mode
Edited by swede at 2017-1-5 02:47

Hello!

Got my pc-plus and installed Raspbian (Raspbian_For_OrangePi_pcplus.img.xz) which contained Raspbian_For_OrangePi2_mini2_v0_8_0.img. I can't see the emmc-drive. Got any tips? Wrong image? Very gratefull for any ideas!

ls -al /dev/mm*
brw-rw---T 1 root floppy 179, 0 Jan  3 19:36 /dev/mmcblk0
brw-rw---T 1 root floppy 179, 1 Jan  3 19:36 /dev/mmcblk0p1
brw-rw---T 1 root floppy 179, 2 Jan  3 19:37 /dev/mmcblk0p2

dmesg:
(had to cut some in order to meet max post, full dmesg attached)

[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.39 (allwinner@steven) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #20 SMP PREEMPT Sat May 2 16:01:42 HKT 2015
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun8i
[    0.000000] Ignoring tag cmdline (using the default kernel command line)
[    0.000000] cma: CMA: reserved 256 MiB at 70000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c09fe680, node_mem_map c0ad2000
[    0.000000]   Normal zone: 1710 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 192850 pages, LIFO batch:31
[    0.000000]   HighMem zone: 594 pages used for memmap
[    0.000000]   HighMem zone: 66990 pages, LIFO batch:15
[    0.000000] script_init enter!
[    0.000000] script_init exit!
[    0.000000] PERCPU: Embedded 8 pages/cpu @c13e8000 s11776 r8192 d12800 u32768
[    0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259840
[    0.000000] Kernel command line: console=ttyS0,115200 console=tty0 disp.screen0_output_mode=EDID:1280x720p60 hdmi.audio=EDID:0 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 764868k/764868k available, 283708k reserved, 8192K highmem

[    0.043367] sunxi pm init
[    0.043490] pinctrl core: initialized pinctrl subsystem
[    0.053975] NET: Registered protocol family 16
[    0.054713] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.054713] script_sysfs_init success
[    0.054713] sunxi_dump_init success
[    0.054713] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[    0.054713] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver

[    0.160779] twi_chan_cfg()335 - [twi0] has no twi_regulator.
[    0.160779] twi_chan_cfg()335 - [twi1] has no twi_regulator.
[    0.160779] twi_chan_cfg()335 - [twi2] has no twi_regulator.
[    0.160779] Linux video capture interface: v2.00
[    0.160779] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.160779] Bluetooth: Core ver 2.16
[    0.160779] NET: Registered protocol family 31

[    0.160992] cfg80211: Calling CRDA to update world regulatory domain
[    0.161068] Switching to clocksource arch_sys_counter

[    0.485161] sunxi_cmatest_init enter
[    0.609241] sunxi_cmatest_init success
[    0.704302] loop: module loaded
[    0.800456] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
[    0.932027] sunxi_spi_chan_cfg()1355 - [spi-1] has no spi_regulator.

[    0.984588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.011928] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.021094] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[    1.030000] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[    1.050028] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00

[    1.788774] mmc0: new high speed SDHC card at address aaaa
[    1.789087] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[    1.791244]  mmcblk0: p1 p2

[    1.843125] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    1.851693] Registering SWP/SWPB emulation handler
[    1.857052] sunxi_bootup_extend_init: bootup extend state 1
[    1.863613] registered taskstats version 1
[    1.868509] cmdline,disp=EDID:1280x720p60
[    1.873014] [HDMI] power vcc-hdmi-18
[    1.903744] cmdline,disp=EDID:1280x720p60
[    1.908244] [DISP] disp_init_tv,line:531:screen 0 do not support TV TYPE!
[    1.915837] [DISP] bsp_disp_tv_register,line:938:'ptv is null
[    1.922245] tv registered!!
[    2.510033] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=4
[    2.520967] sunxi-rtc sunxi-rtc: setting system clock to 2017-01-03 19:36:55 UTC (1483472215)
[    2.530481] ths_fetch_sysconfig_para: type err  device_used = 1.

[    2.621197] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.630303] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.641940] devtmpfs: mounted
[    2.645468] Freeing init memory: 336K
[    3.324203] udevd[192]: starting version 175
[    3.608587] vmouse_input_dev_open
[    3.730143] vmouse_input_dev_close
[    5.269206] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.455583] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.770272] RTL871X: module init start
[    5.770288] RTL871X: rtl8189es v4.3.0.4_11916.20140724_COB
[    5.770295] RTL871X: build time: May  2 2015 15:50:17
[    5.770308] [wifi_pm]: set wl_reg_on 0 !
[    5.820352] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.821878] [mmc]: sdc1 power_supply is null
[    5.840027] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.862339] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
[    5.863165] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
[    5.863186] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.865658] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.867560] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8,  RTO !!
[    5.867579] *******************Try sdio*******************
[    5.874518] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
[    5.875340] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
[    5.876160] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
[    5.876980] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
[    5.876999] *******************Try sd *******************
[    5.883828] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
[    5.884650] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
[    5.885470] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
[    5.886290] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
[    5.886308] *******************Try mmc*******************
[    5.892332] [mmc]: sdc1 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.893238] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 1,  RTO !!
[    5.893265] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.893374] [mmc]: sdc1 power_supply is null
[    5.895945] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.897467] [mmc]: sdc1 power_supply is null
[    5.910029] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.920335] [wifi_pm]: set wl_reg_on 1 !
[    5.920509] RTL871X: module init ret=0
[    5.932681] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
[    5.933791] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
[    5.933829] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.936509] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.938734] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8,  RTO !!
[    5.938772] *******************Try sdio*******************
[    5.945436] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.958712] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[    5.958870] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[    5.959032] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[    5.959925] mmc1: new high speed SDIO card at address 0001



This thread contains more resources

You need to Log in to download or view,No account?    Register

x

62

threads

653

posts

5186

credits

Administrator

Rank: 9Rank: 9Rank: 9

credits
5186
Published in 2017-1-14 15:28:07 | Show all floors
Hi friend, so sorry that the Raspbian (Raspbian_For_OrangePi_pcplus.img.xz) which contained Raspbian_For_OrangePi2_mini2_v0_8_0.img. is wrong image. Have you solved your problem? If no, you could try image shared in Mega.
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list