please choosego to mobile | Continue to access the PC version
View: 6749|Reply: 1

8189ftv driver compilatgion

[Copy link]

5

threads

7

posts

53

credits

Registered member

Rank: 2

credits
53
Published in 2017-1-5 15:50:29 | Show all floors |Read mode
Using orange pi plus 2e, armbian , come with 8189FTV driver (8189fs.ko), but wants to learn how to compile wireless driver
GEt the original driver from Realtek, success compile , sucess insmod, but the dmesg is different with original driver 8189fs.ko

Then ifconfig , cannot find wlan0 , error device no found.

Makefile select CONFIG_SUN_NX y, select CONFIG_SUN_8ixxx will lead to unknown parameter when insmod the driver
Do anyone face this before or some advise
make command listed below
make ARCH=arm KSRC=/sys/lib/linux-header-sun8i CROSS_COMPILE=

thanks

5

threads

7

posts

53

credits

Registered member

Rank: 2

credits
53
 Author| Published in 2017-8-15 17:33:26 | Show all floors




Note for compile wpa_supplicant 2.6 in orange pi
wget https://w1.fi/releases/wpa_supplicant-2.6.tar.gz

tar -zxvf wpa_supplicant-2.6.tar.gz

cd /wpa_supplicant-2.6/wpa_supplicant
#create config file
cp defconfig .config
#add this to .config
CFLAGS += -I/usr/include/libnl3

CONFIG_LIBNL20=y

save .config
#add this symbolic link
ln -s /lib/arm-linux-gnueabihf/libnl-3.so /lib/arm-linux-gnueabihf/libnl.so

ln -s /lib/arm-linux-gnueabihf/libnl-genl-3.so /lib/arm-linux-gnueabihf/libnl-genl.so

make clean
make
make install
reboot
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list