H3Droid - Android image developed specifically to work on Allwinner H3 devices

paparazzo · Published in 2017-9-8 19:33:26

Edited by paparazzo at 2017-9-8 19:35

Okay, but I have good antenna and excellent signal about 40 dBm

It just write "connecting.....", next write "saved" and do nothing.
Will wait for fixes, currently can't use H3 Droid on my Orange Pi PC

BTW - another android like Zidoo or Beelink conencted with same device.

kotcza · Published in 2017-9-8 23:33:50

what is the dongle (chipset)?

paparazzo · Published in 2017-9-9 02:18:49

Dongle is Comfast CF-WU755P with chipset RTL8188EU

pdjm · Published in 2017-9-9 03:34:06

Same problem here, just like paparazzo, i am using ralink wi-fi. But if i try to connect to a open network with no password it connects fine. This is inside Android, in h3resc when i enable wi-fi it connects to my wi-fi wpa protected network with sucess

paparazzo · Published in 2017-9-9 11:09:59

Edited by paparazzo at 2017-9-9 15:39

I can't connect even at open network in h3droid
In h3resc it connected to secured network, can't check unsecured.

MadMax2 · Published in 2017-9-9 20:55:04

I had no problem with a Railink RT3070 dongle (Dlink DWA 125). One bug I noticed was that the green armbian thing is still happening even after a do the switch in H3resc. i tried to edit the fex to what worked in the last version but that part of the fex is different now.

paparazzo · Published in 2017-9-10 02:41:53

One more note about issue with RTL8188eu connection in H3droid 1.3.1

Seems Orange Pi PC can't obtain IP adress from wifi network.
When I choose"Change network" and manually input IP, mask and DNS - system reboots after click "save"

paparazzo · Published in 2017-9-10 14:26:01

Huh..
I continue my experience with H3 droid 1.3.1 and Orange Pi PC. I tried USB dongle with Ralink RT5370
it connected and works fine!

But RTL8188eu don't want to connect. Hope team will fix that in future.

paparazzo · Published in 2017-9-10 23:39:21

Another issue with 1.3.1 - after reboot HDMI output set to 1280x720 60 hz, so I neeed manually revert it to 1920x1080 60 Hz.

I use Android display size as 1920x1080 for correct FullHD output, and display density set to 240. Display density remains after reboot, but HDMI not.

basilbrush · Published in 2017-9-11 21:47:47

Hi,
I have been testing H3Droid 1.31 on my Orange Pi PC and Orange Pi One.

I have 3 comments about the release

1) My specific use case is emulation in retroarch 1.6.7 at 1080P 60Hz.  The frame rate ranged from high 40s to 60fps when using the default ondemand governor.  I was only able to get stable 60fps for most snes and megadrive games when using the interactive governor.  This is abnormal as ondemand usually performs better than interactive.

2) 8188eu usb wifi could not connect as reported by other users.  I was able to successfully get wifi working on rt2800usb and rtl8192cu usb chips on both Orange Pis

3) The Orange Pi PC resets the video mode to 720p 50Hz after resume (eg turn off tv and then power back on).  I set the resolution to 1080P 60hz in H3resc and android.  H3resc sets the selected video mode correctly on boot and in android.  I can work around the video mode reset my manually adjusting the resolution in android to 1080P 60Hz each time i power on my display.
I did not encounter this 720p 50Hz video mode reset when using the Orange Pi One.  It looks like it affects the Orange Pi PC only.

I would like to say thanks for your hard work.  For me, H3Droid works better the Beelink X2 and Zidoo X1 Android hacks for the Orange Pi family