Linux Distributions for Orange PI H3 boards

Paul75

Somebody can give me a tuto or why can I do to start the board with a button ? same as a real PC ?

Thanks

nkk

Hi, everyone! Help me, please, with my new WIFI dongle on Orange Pi PC!
On OPI_slackware_14.1 it runs fine (at speed 1M, but works)

On Ubuntu_wily_mini dmesg says: rtlwifi: Firmware rtlwifi/rtl8192cufw.bin not available

1. # lsmod
   
2. Module                  Size  Used by
   
3. rtl8192cu              87956  0
   
4. rtlwifi                70757  1 rtl8192cu
   
5. rtl8192c_common        52422  1 rtl8192cu
   
6. mac80211              331125  3 rtlwifi,rtl8192c_common,rtl8192cu
   
7. gpio_sunxi              8233  0
   
8. 
   
9. # lsusb
   
10. Bus 002 Device 003: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
    
11. 
    
12. # echo 0bda 8176 > /sys/bus/usb/drivers/rtl8192cu/new_id
    
13. 
    
14. # iwconfig
    
15. gre0      no wireless extensions.
    
16. lo        no wireless extensions.
    
17. tunl0     no wireless extensions.
    
18. sit0      no wireless extensions.
    
19. eth0      no wireless extensions.
    
20. ip6tnl0   no wireless extensions.
    
21. 
    
22. # ls -la /lib/firmware/rtlwifi/
    
23. total 304
    
24. drwxr-xr-x 2 orangepi orangepi   4096 Jan 21  2013 ./
    
25. drwxrwxr-x 6 orangepi orangepi   4096 Oct  1 11:06 ../
    
26. -rw-r--r-- 1 orangepi orangepi  13540 Jan 21  2013 rtl8192cfw.bin
    
27. -rw-r--r-- 1 orangepi orangepi  14800 Jan 21  2013 rtl8192cfwU_B.bin
    
28. -rw-r--r-- 1 orangepi orangepi  14818 Jan 21  2013 rtl8192cfwU.bin
    
29. -rw-r--r-- 1 orangepi orangepi  16014 Jan 21  2013 rtl8192cufw.bin
    
30. -rw-r--r-- 1 orangepi orangepi  20526 Jan 21  2013 rtl8192defw.bin
    
31. -rw-r--r-- 1 orangepi orangepi  88856 Jan 21  2013 rtl8192sefw.bin
    
32. -rw-r--r-- 1 orangepi orangepi 122328 Jan 21  2013 rtl8712u.bin
    

Copy code

Paranoidjack

Running into an issue with DNScrypt-proxy and it seems to be pointing towards kernel related. see here: http://www.orangepi.org/orangepi ... &fromuid=151571

I've used the firmware update function in DietPi and the problem still persists.

avinashga23

Hi,

If i install debian jessie mini image on Orangepi plus 2 can i get wifi working? Can you pint me to resource which will guide me configuring a wifi on Orange PI plus 2 running headless Debian Jessie?

Regards,
--
Avinash

andry

I have an orange pi-2 revision 1530. But no one of script.bin.opi-2_xxxxxxxx (by Loboris) with corresponded uimages couldnt up my board it seems just keeps rebooting with no image on the monitor (red led on board is on for some time, then blinks then on again). Also i haven't found any of working android images, (on 800x480 and 720p tv) some of them just stays on logo for a long time. Instead I tried script.bin.opi-pc_xxxxxxxx (by Loboris) and suddenly it succeeded with ubuntu-mate. Ethernet present, but there is no working onboard wi-fi and maybe some other devices (this is because of the wrong script.bin i suppose). What have i to do to make a right script? is it possible i have a broken board? sorry for the dumb questions, i am totally newby with linux :-/.

kinlingbanri

Hello loboris:

I use Lubuntu 15,
apt-get install gnome-schedule
install is success,
but terminal type crontab command,
output "no crontab command",
Do you have the same problem?

goskum

Randomly OPI PC boots with USB ports in v1.1 mode. I'm using last loboris kernel in debian jessie. It is there any way to solve it?

WereCatf

goskum replied at 2016-3-6 03:50
Randomly OPI PC boots with USB ports in v1.1 mode. I'm using last loboris kernel in debian jessie. I ...

I would recommend trying Armbian instead, grab the non-desktop version if you want Jessie or the desktop-version if Ubuntu 14.04 is fine, or compile Armbian yourself.

goskum

Does it run better than debian with loboris kernel?
I'll try it.

But, any solution for the usb speed on debian jessie with loboris kernel?

melanrz

WereCatf replied at 2016-3-6 04:02
I would recommend trying Armbian instead, grab the non-desktop version if you want Jessie or the d ...

boot geting 5min,mali driver working slow (50fps on glxgeras,other distros 150-200fps),cant get wifi connect to wpa network,poor image.