Linux Distributions for Orange PI H3 boards

c-fox · Published in 2016-4-14 03:30:54

Thanks @rizapn
I will try to use your method, and I'll keep you updated ... I had already tried other methods without success .

c-fox · Published in 2016-4-14 07:23:06

@rizapn
the method you suggested works fine .
But now I have to find the right resolution for my tv , the standard does not seem to go well .
I saw that changing " Fb0_width fb0_height = = ... and ... " I get the custom resolution .

Thanks again Rizapn

jal_frezie · Published in 2016-4-15 17:10:14

I tried this method to get the right resolution for my TV which needs 1360x768, starting with the script.bin for 1080i, and I got the whole desktop in a visible area in the top left corner of the screen. I guess the output was still scanning 1080 lines but the frame buffer was only letting a smaller area be used.
Hmmm, if you could define the frame buffer area to be somewhere other than the top left corner of the scanned area, you could fix the overscan problem...

c-fox · Published in 2016-4-15 18:41:10

Edited by c-fox at 2016-4-15 18:47

jal_frezie replied at 2016-4-15 17:10
I tried this method to get the right resolution for my TV which needs 1360x768, starting with the sc ...

I have a problem with any resolution, the desktop is off the screen .I think at this point it is unsolvable because I think it depends on the TV or adapter HDMI - DVI I use.Even my basic TV has 1360x768 , I could use to insert a frame around the desk so you can visulizzare correctly, but I do not know how to do .
I found this thread :http://www.orangepi.org/orangepi ... ead&tid=633When I have time I try it !

rizapn · Published in 2016-4-15 20:15:56

How about changing the TV picture-size/zoom/scaling method? I found in my Samsung TV, there are "Screen Fit" option. I usually use this to get the best display using my OPi-PC ...

c-fox · Published in 2016-4-22 15:42:25

I have an old tv, that option is not available on my TV .

Paul75 · Published in 2016-4-23 23:20:23

Hello,

I xant to save my installation of archlinux. I was installed into sdcard.

When I can save it ?

Can I copy my card to image ?
exemple : sudo dd if=/dev/mmcblk1 of=/home/paul/ArchLinux.img bs=1m

????

Paul75 · Published in 2016-4-29 16:46:12

Hello,

To my previous question when I copy my card sd to get a img if my card is 64Gb it take a long time and finally have a img of 64Gb...

Ca I do a img with the content size ? And When I do it ? To have a small image ?

Thanks

Manjup · Published in 2016-4-29 20:07:11

Paul75 replied at 2016-4-29 16:46
Hello,

To my previous question when I copy my card sd to get a img if my card is 64Gb it take a lon ...

U have to use any Linux system (prefer UBUNTU)
1. Insert the card into the laptop
2. open the sd card via GParted Partition Manager
3. Manually resize the partition
4. Like this http://askubuntu.com/questions/5 ... tition-with-gparted
5. Then read the sd card via diskimager to create.

renmet · Published in 2016-4-30 23:40:28

Hello,

tried to build a Raspbian Jessie Image for my PI Plus 2 with create_image. Everythings looked fine an then i got this message

Error while loading /bin/bash: No such file or directory
================================================
ERROR on second-stage, instalation NOT FINISHED.
================================================

Can anyone help me with this problem. Tried the script on Ubuntu Mate 16.04 .

Thanks for help
kindly regards

Linux Distributions for Orange PI H3 boards

This thread contains more resources