please choosego to mobile | Continue to access the PC version
Author: loboris

Linux Distributions for Orange PI H3 boards

  [Copy link]

0

threads

13

posts

125

credits

Registered member

Rank: 2

credits
125
Published in 2015-11-16 05:18:31 | Show all floors
Edited by nkk at 2015-11-16 05:52
lymon replied at 2015-11-15 22:13
try disabling networkmanager if you manually want to set up or configure a connection.

also chec ...

I reinstalled Linux and now at Ubuntu_wily_mini:
  1. #...
  2. root@OrangePI:~# sudo ifconfig wlx9094e4a458b8 up
  3. SIOCSIFFLAGS: No such file or directory
  4. root@OrangePI:~# dmesg | tail
  5. [  264.970163] usb 6-1: reset full-speed USB device number 2 using sunxi-ohci
  6. [  265.441637] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  7. [  265.443771] Registered led device: rt2800usb-phy0::radio
  8. [  265.444081] Registered led device: rt2800usb-phy0::assoc
  9. [  265.444325] Registered led device: rt2800usb-phy0::quality
  10. [  265.878939] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
  11. [  265.882122] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
  12. [  290.588255] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
  13. [  559.743857] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
  14. [ 1188.597463] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
  15. root@OrangePI:~# ls /lib/firmware
  16. rt2561.bin   rt2661.bin  rt2870.bin  rt3071.bin  rt3290.bin  RTL8192E   rtl_nic
  17. rt2561s.bin  rt2860.bin  rt3070.bin  rt3090.bin  rt73.bin    RTL8192SU  rtlwifi
Copy code
Where & how to get the firmware? Chip is RT5370N:



This thread contains more resources

You need to Log in to download or view,No account?    Register

x

0

threads

9

posts

40

credits

Novice

Rank: 1

credits
40
Published in 2015-11-16 12:29:46 | Show all floors
nkk replied at 2015-11-15 16:26
No, just from this dialog

Thanks.

I tried fedora.. ethernet worked without any issues


1

threads

90

posts

735

credits

Senior member

Rank: 4

credits
735
Published in 2015-11-16 12:44:25 | Show all floors
nkk replied at 2015-11-16 05:18
I reinstalled Linux and now at Ubuntu_wily_mini:
Where & how to get the firmware? Chip is RT5370N:
...

do:
udevd --version

output needs to be  "215" in order for firmware loading to work with this 3.4 kernel.
There have been a lot of reports about firmware loading problems in this topic, so best is to do a search which distributions work and which don't.





11

threads

286

posts

1898

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
1898
Published in 2015-11-16 16:12:24 from mobile | Show all floors
Npeti replied at 2015-11-16 03:16
Hello guys!

I got my Opi in the last week. But I'm really disappointed. I read loboris' articles to ...

Burn image and only rename right script and uimage,dont copy and replace from kernel.zip.

11

threads

286

posts

1898

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
1898
Published in 2015-11-16 16:14:05 from mobile | Show all floors
newest script and uimage only after kernel update

0

threads

32

posts

334

credits

Intermediate member

Rank: 3Rank: 3

credits
334
Published in 2015-11-16 18:56:53 | Show all floors
keiser1080 replied at 2015-11-16 04:23
on debian debian image unable to load module

Run
  1. depmod
Copy code
and modules will load via modprobe

18

threads

303

posts

8747

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
8747
Published in 2015-11-16 21:16:17 | Show all floors
Edited by jacer at 2015-11-16 21:18

I can use rtl8192cu only with WEP or None encryption, no WPA or WPA2. Mali installed on Debian Jessie, but some error.
  1. [    0.000000] Booting Linux on physical CPU 0
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Linux version 3.4.39-02-lobo (boris@UbuntuMate) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Tue Nov 10 10:37:50 CET 2015
  5. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  6. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [    0.000000] Machine: sun8i
  8. [    0.000000] Ignoring tag cmdline (using the default kernel command line)
  9. [    0.000000] bootconsole [earlycon0] enabled
  10. [    0.000000] cma: CMA: reserved 256 MiB at 70000000
  11. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  12. [    0.000000] On node 0 totalpages: 262144
  13. [    0.000000] free_area_init_node: node 0, pgdat c101a9c0, node_mem_map c10f8000
  14. [    0.000000]   Normal zone: 1710 pages used for memmap
  15. [    0.000000]   Normal zone: 0 pages reserved
  16. [    0.000000]   Normal zone: 192850 pages, LIFO batch:31
  17. [    0.000000]   HighMem zone: 594 pages used for memmap
  18. [    0.000000]   HighMem zone: 66990 pages, LIFO batch:15
  19. [    0.000000] script_init enter!
  20. [    0.000000] script_init exit!
  21. [    0.000000] PERCPU: Embedded 8 pages/cpu @c1a0e000 s11840 r8192 d12736 u32768
  22. [    0.000000] pcpu-alloc: s11840 r8192 d12736 u32768 alloc=8*4096
  23. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  24. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259840
  25. [    0.000000] Kernel command line: earlyprintk=ttyS0,115200 loglevel=8 initcall_debug=0 console=ttyS0,115200 console=tty0 init=/init
  26. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  27. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  28. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  29. [    0.000000] allocated 2097152 bytes of page_cgroup
  30. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  31. [    0.000000] Memory: 1024MB = 1024MB total
  32. [    0.000000] Memory: 756524k/756524k available, 292052k reserved, 8192K highmem
  33. [    0.000000] Virtual kernel memory layout:
  34. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  35. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  36. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  37. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  38. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  39. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  40. [    0.000000]       .text : 0xc0008000 - 0xc099dc14   (9816 kB)
  41. [    0.000000]       .init : 0xc099e000 - 0xc0f9ee40   (6148 kB)
  42. [    0.000000]       .data : 0xc0fa0000 - 0xc101d438   ( 502 kB)
  43. [    0.000000]        .bss : 0xc101dbec - 0xc10f74c0   ( 871 kB)
  44. [    0.000000] Preemptible hierarchical RCU implementation.
  45. [    0.000000]         Additional per-CPU info printed with stalls.
  46. [    0.000000] NR_IRQS:544
  47. [    0.000000] Architected local timer running at 24.00MHz.
  48. [    0.000000] Switching to timer-based delay loop
  49. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  50. [    0.000000] Console: colour dummy device 80x30
  51. [    0.000000] console [tty0] enabled, bootconsole disabled
  52. [    0.019916] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  53. [    0.019970] pid_max: default: 32768 minimum: 301
  54. [    0.020240] Mount-cache hash table entries: 512
  55. [    0.021134] Initializing cgroup subsys cpuacct
  56. [    0.021165] Initializing cgroup subsys memory
  57. [    0.021222] Initializing cgroup subsys devices
  58. [    0.021247] Initializing cgroup subsys freezer
  59. [    0.021270] Initializing cgroup subsys blkio
  60. [    0.021304] Initializing cgroup subsys perf_event
  61. [    0.021368] CPU: Testing write buffer coherency: ok
  62. [    0.021423] ftrace: allocating 26504 entries in 78 pages
  63. [    0.050268] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  64. [    0.050302] [sunxi_smp_prepare_cpus] enter
  65. [    0.050344] Setting up static identity map for 0x406e6188 - 0x406e61e0
  66. [    0.051182] CPU1: Booted secondary processor
  67. [    0.051182] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  68. [    0.051313] CPU2: Booted secondary processor
  69. [    0.051313] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  70. [    0.051313] CPU3: Booted secondary processor
  71. [    0.051313] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  72. [    0.060176] Brought up 4 CPUs
  73. [    0.060259] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  74. [    0.060892] devtmpfs: initialized
  75. [    0.063159] wakeup src cnt is : 1.
  76. [    0.063178] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
  77. [    0.063202] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
  78. [    0.063230] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
  79. [    0.063258] sunxi pm init
  80. [    0.063385] pinctrl core: initialized pinctrl subsystem
  81. [    0.074038] NET: Registered protocol family 16
  82. [    0.074680] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  83. [    0.074680] script_sysfs_init success
  84. [    0.074680] sunxi_dump_init success
  85. [    0.074680] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  86. [    0.074680] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  87. [    0.074680] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  88. [    0.074680] hw-breakpoint: maximum watchpoint size is 8 bytes.
  89. [    0.074680] script config pll_video to 297 Mhz
  90. [    0.074680] script config pll_de to 864 Mhz
  91. [    0.074680] script config pll_ve to 402 Mhz
  92. [    0.074680] sunxi_default_clk_init
  93. [    0.074680] try to set pll6ahb1 to 200000000
  94. [    0.074680] try to set ahb clk source to pll6ahb1
  95. [    0.074680] set ahb clk source to pll6ahb1
  96. [    0.074680] try to set ahb1 to 200000000
  97. [    0.074680] try to set apb1 to 100000000
  98. [    0.074793] ===fe3o4==== sunxi_root_procfs_attach ret:0
  99. [    0.080509] bio: create slab <bio-0> at 0
  100. [    0.080509] [ARISC] :sunxi-arisc driver v1.04
  101. [    0.095045] [ARISC] :arisc version: [v0.1.34]
  102. [    0.171617] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
  103. [    0.180388] SCSI subsystem initialized
  104. [    0.180578] usbcore: registered new interface driver usbfs
  105. [    0.180660] usbcore: registered new interface driver hub
  106. [    0.180698] usbcore: registered new device driver usb
  107. [    0.180698] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  108. [    0.180698] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  109. [    0.180698] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  110. [    0.180722] Linux video capture interface: v2.00
  111. [    0.180921] Advanced Linux Sound Architecture Driver Version 1.0.25.
  112. [    0.181404] Bluetooth: Core ver 2.16
  113. [    0.181451] NET: Registered protocol family 31
  114. [    0.181473] Bluetooth: HCI device and connection manager initialized
  115. [    0.181500] Bluetooth: HCI socket layer initialized
  116. [    0.181519] Bluetooth: L2CAP socket layer initialized
  117. [    0.181559] Bluetooth: SCO socket layer initialized
  118. [    0.181771] cfg80211: Calling CRDA to update world regulatory domain
  119. [    0.181848] Switching to clocksource arch_sys_counter
  120. [    0.192064] FS-Cache: Loaded
  121. [    0.192344] CacheFiles: Loaded
  122. [    0.202272] NET: Registered protocol family 2
  123. [    0.202535] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  124. [    0.203071] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  125. [    0.204684] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  126. [    0.205476] TCP: Hash tables configured (established 131072 bind 65536)
  127. [    0.205500] TCP: reno registered
  128. [    0.205520] UDP hash table entries: 512 (order: 2, 16384 bytes)
  129. [    0.205564] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  130. [    0.205840] NET: Registered protocol family 1
  131. [    0.206176] RPC: Registered named UNIX socket transport module.
  132. [    0.206202] RPC: Registered udp transport module.
  133. [    0.206220] RPC: Registered tcp transport module.
  134. [    0.206238] RPC: Registered tcp NFSv4.1 backchannel transport module.
  135. [    0.550349] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  136. [    0.550498] sunxi_reg_init enter
  137. [    0.551224] audit: initializing netlink socket (disabled)
  138. [    0.551285] type=2000 audit(0.550:1): initialized
  139. [    0.554365] highmem bounce pool size: 64 pages
  140. [    0.555250] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  141. [    0.555365] NFS: Registering the id_resolver key type
  142. [    0.555706] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  143. [    0.556380] NTFS driver 2.1.30 [Flags: R/W].
  144. [    0.556503] fuse init (API version 7.18)
  145. [    0.557279] Btrfs loaded
  146. [    0.557312] msgmni has been set to 1461
  147. [    0.558345] io scheduler noop registered
  148. [    0.558370] io scheduler deadline registered
  149. [    0.558457] io scheduler cfq registered (default)
  150. [    0.558847] [DISP]disp_module_init
  151. [    0.559132] cmdline,disp=
  152. [    0.566688] [DISP] Fb_map_kernel_logo,line:925:Fb_map_kernel_logo failed!
  153. [    0.579450] Console: switching to colour frame buffer device 160x45
  154. [    0.593190] [DISP]disp_module_init finish
  155. [    0.593476] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
  156. [    0.593629] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
  157. [    0.593774] sw_uart_get_devinfo()1503 - uart3 has no uart_regulator.
  158. [    0.594325] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  159. [    0.594470] sw_uart_pm()890 - uart0 clk is already enable
  160. [    0.594600] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  161. [    0.690818] console [ttyS0] enabled
  162. [    1.287644] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  163. [    1.444422] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
  164. [    1.600812] sunxi_cmatest_init enter
  165. [    1.749730] sunxi_cmatest_init success
  166. [    1.908198] loop: module loaded
  167. [    2.067393] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
  168. [    2.109573] sunxi_spi_chan_cfg()1355 - [spi-1] has no spi_regulator.
  169. [    2.120821] spi spi0: master is unqueued, this is deprecated
  170. [    2.131066] tun: Universal TUN/TAP device driver, 1.6
  171. [    2.140334] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  172. [    2.151637] PPP generic driver version 2.4.2
  173. [    2.160224] PPP BSD Compression module registered
  174. [    2.169069] PPP Deflate Compression module registered
  175. [    2.180510] PPP MPPE Compression module registered
  176. [    2.189476] NET: Registered protocol family 24
  177. [    2.198048] PPTP driver version 0.8.5
  178. [    2.205972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  179. [    2.237074] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  180. [    2.249757] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  181. [    2.262428] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  182. [    2.290050] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  183. [    2.300866] hub 1-0:1.0: USB hub found
  184. [    2.308679] hub 1-0:1.0: 1 port detected
  185. [    2.336977] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  186. [    2.349597] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
  187. [    2.362157] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
  188. [    2.390034] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
  189. [    2.400241] ehci_irq: highspeed device connect
  190. [    2.409289] hub 2-0:1.0: USB hub found
  191. [    2.417162] hub 2-0:1.0: 1 port detected
  192. [    2.445495] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  193. [    2.458206] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
  194. [    2.470897] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000
  195. [    2.500033] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
  196. [    2.510932] hub 3-0:1.0: USB hub found
  197. [    2.518854] hub 3-0:1.0: 1 port detected
  198. [    2.547268] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  199. [    2.559985] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4
  200. [    2.572624] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
  201. [    2.600035] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
  202. [    2.610477] ehci_irq: highspeed device connect
  203. [    2.619700] hub 4-0:1.0: USB hub found
  204. [    2.627714] hub 4-0:1.0: 1 port detected
  205. [    2.635782] ehci_irq: highspeed device disconnect
  206. [    2.645032] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  207. [    2.675628] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  208. [    2.687964] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5
  209. [    2.700202] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  210. [    2.774456] hub 5-0:1.0: USB hub found
  211. [    2.782461] hub 5-0:1.0: 1 port detected
  212. [    2.810866] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  213. [    2.823331] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6
  214. [    2.835686] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
  215. [    2.904451] hub 6-0:1.0: USB hub found
  216. [    2.912477] hub 6-0:1.0: 1 port detected
  217. [    2.940947] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
  218. [    2.953389] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7
  219. [    2.960050] usb 4-1: new high-speed USB device number 2 using sunxi-ehci
  220. [    2.977168] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
  221. [    3.044521] hub 7-0:1.0: USB hub found
  222. [    3.052693] hub 7-0:1.0: 1 port detected
  223. [    3.081285] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver
  224. [    3.093782] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8
  225. [    3.106172] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400
  226. [    3.174483] hub 8-0:1.0: USB hub found
  227. [    3.182612] hub 8-0:1.0: 1 port detected
  228. [    3.191192] Initializing USB Mass Storage driver...
  229. [    3.200765] usbcore: registered new interface driver usb-storage
  230. [    3.211361] USB Mass Storage support registered.
  231. [    3.220443] usbcore: registered new interface driver ums-alauda
  232. [    3.231003] usbcore: registered new interface driver ums-cypress
  233. [    3.241635] usbcore: registered new interface driver ums-datafab
  234. [    3.252186] usbcore: registered new interface driver ums_eneub6250
  235. [    3.262902] usbcore: registered new interface driver ums-freecom
  236. [    3.273412] usbcore: registered new interface driver ums-isd200
  237. [    3.283713] usbcore: registered new interface driver ums-jumpshot
  238. [    3.294185] usbcore: registered new interface driver ums-karma
  239. [    3.300046] usb 6-1: new low-speed USB device number 2 using sunxi-ohci
  240. [    3.315204] usbcore: registered new interface driver ums-onetouch
  241. [    3.325635] usbcore: registered new interface driver ums-realtek
  242. [    3.335945] usbcore: registered new interface driver ums-sddr09
  243. [    3.346043] usbcore: registered new interface driver ums-sddr55
  244. [    3.356063] usbcore: registered new interface driver ums-usbat
  245. [    3.365991] usbcore: registered new interface driver usbserial
  246. [    3.375786] usbserial: USB Serial Driver core
  247. [    3.383943] usbcore: registered new interface driver option
  248. [    3.393473] USB Serial support registered for GSM modem (1-port)
  249. [    3.404134] file system registered
  250. [    3.412765] android_usb gadget: Mass Storage Function, version: 2009/09/11
  251. [    3.423871] android_usb gadget: Number of LUNs=3
  252. [    3.432353]  lun0: LUN: removable file: (no medium)
  253. [    3.441114]  lun1: LUN: removable file: (no medium)
  254. [    3.449791]  lun2: LUN: removable file: (no medium)
  255. [    3.458708] android_usb gadget: android_usb ready
  256. [    3.467380]  uinput result 0 , vmouse_init
  257. [    3.475712] mousedev: PS/2 mouse device common for all mice
  258. [    3.485313] sunxikbd_init failed.
  259. [    3.492257] ls_fetch_sysconfig_para: type err  device_used = 0.
  260. [    3.502128] =========script_get_err============
  261. [    3.510389] ltr_init: ls_fetch_sysconfig_para err.
  262. [    3.519370] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
  263. [    3.530068] i2c /dev entries driver
  264. [    3.537455] IR RC5(x) protocol handler initialized
  265. [    3.546026] sunxi tsc version 0.1
  266. [    3.552947] tscdev_init: tsc driver is disabled
  267. [    3.561231] sunxi cedar version 0.1
  268. [    3.568289] [cedar]: install start!!!
  269. [    3.575579] [cedar]: install end!!!
  270. [    3.582464] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
  271. [    3.592618] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
  272. [    3.603961] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
  273. [    3.617683] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
  274. [    3.627101] timeout_to_interv, line 167
  275. [    3.634550] interv_to_timeout, line 189
  276. [    3.641953] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
  277. [    3.654705] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  278. [    3.667576] Bluetooth: HCI UART driver ver 2.2
  279. [    3.676335] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.109 2014-12-4 20:51) Compiled in Nov 10 2015 at 10:35:31
  280. [    3.691525] [mmc]: get mmc0's sdc_power is null!
  281. [    3.700448] [mmc]: get mmc1's sdc_power is null!
  282. [    3.709330] [mmc]: get mmc1's 2xmode ok, val = 1
  283. [    3.718248] [mmc]: get mmc1's ddrmode ok, val = 1
  284. [    3.727246] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2
  285. [    3.739069] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  286. [    3.755577] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  287. [    3.771641] sunxi_leds_fetch_sysconfig_para script_parser_fetch "leds_para" leds_used = -1063531780
  288. [    3.785322] =========script_get_err============
  289. [    3.803930] generic-usb 0003:1D57:FFA4.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Receiver] on usb-sunxi-ohci-1/input0
  290. [    3.930582] generic-usb 0003:1D57:FFA4.0002: input,hidraw1: USB HID v1.10 Keyboard [2.4G Receiver] on usb-sunxi-ohci-1/input1
  291. [    3.947916] usbcore: registered new interface driver usbhid
  292. [    3.965409] usbhid: USB HID core driver
  293. [    3.989654] asoc: sndcodec <-> sunxi-codec mapping ok
  294. [    4.010350] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  295. [    4.022680] oprofile: using arm/armv7-ca7
  296. [    4.032550] u32 classifier
  297. [    4.040864]     Actions configured
  298. [    4.049854] Netfilter messages via NETLINK v0.30.
  299. [    4.060530] nf_conntrack version 0.5.0 (15916 buckets, 63664 max)
  300. [    4.072658] ctnetlink v0.93: registering with nfnetlink.
  301. [    4.083543] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  302. [    4.096270] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  303. [    4.108049] xt_time: kernel timezone is -0000
  304. [    4.118031] IPv4 over IPv4 tunneling driver
  305. [    4.127993] gre: GRE over IPv4 demultiplexor driver
  306. [    4.137474] ip_gre: GRE over IPv4 tunneling driver
  307. [    4.147407] ip_tables: (C) 2000-2006 Netfilter Core Team
  308. [    4.157491] arp_tables: (C) 2002 David S. Miller
  309. [    4.166685] TCP: cubic registered
  310. [    4.174341] Initializing XFRM netlink socket
  311. [    4.183254] NET: Registered protocol family 10
  312. [    4.193149] Mobile IPv6
  313. [    4.199855] ip6_tables: (C) 2000-2006 Netfilter Core Team
  314. [    4.210120] IPv6 over IPv4 tunneling driver
  315. [    4.219173] NET: Registered protocol family 17
  316. [    4.227627] NET: Registered protocol family 15
  317. [    4.236088] Bluetooth: RFCOMM TTY layer initialized
  318. [    4.244875] Bluetooth: RFCOMM socket layer initialized
  319. [    4.253892] Bluetooth: RFCOMM ver 1.11
  320. [    4.261345] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  321. [    4.270503] Bluetooth: BNEP filters: protocol multicast
  322. [    4.279490] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  323. [    4.289336] L2TP core driver, V2.0
  324. [    4.296181] PPPoL2TP kernel driver, V2.0
  325. [    4.303512] L2TP IP encapsulation support (L2TPv3)
  326. [    4.311924] L2TP netlink interface
  327. [    4.318752] L2TP ethernet pseudowire support (L2TPv3)
  328. [    4.327445] Registering the dns_resolver key type
  329. [    4.335948] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  330. [    4.347583] ThumbEE CPU extension supported.
  331. [    4.355474] Registering SWP/SWPB emulation handler
  332. [    4.364571] cmdline,disp=
  333. [    4.370518] [HDMI] power vcc-hdmi-18
  334. [    4.408042] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:12:44 UTC (764)
  335. [    4.419803] ths_fetch_sysconfig_para: type err  device_used = 1.
  336. [    4.430481] CPU Budget:Register notifier
  337. [    4.437686] CPU Budget:register Success
  338. [    4.444755] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  339. [    4.459902] [rf_pm]: select module num is 7
  340. [    4.467536] [rf_pm]: module power0 name vcc-wifi-33
  341. [    4.475883] [rf_pm]: failed to fetch module_power1
  342. [    4.484135] [rf_pm]: mod has no chip_en gpio
  343. [    4.491793] [rf_pm]: failed to fetch lpo_use_apclk
  344. [    4.500022] [rf_pm]: regulator on.
  345. [    4.506637] [wifi_pm]: no wifi used in configuration
  346. [    4.514984] ALSA device list:
  347. [    4.521069]   #0: audiocodec
  348. [    4.527006]   #1: sndhdmi
  349. [    4.532721] Warning: unable to open an initial console.
  350. [    4.545388] Freeing init memory: 6144K
  351. [    4.735027] [mmc]: mmc 0 detect change, present 1
  352. [    5.010127] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=5
  353. [    5.240148] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  354. [    5.260990] [mmc]: sdc0 power_supply is null
  355. [    5.290055] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  356. [    5.322365] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52,  RTO !!
  357. [    5.336027] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52,  RTO !!
  358. [    5.346003] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  359. [    5.366176] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  360. [    5.381644] *******************Try sdio*******************
  361. [    5.392521] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5,  RTO !!
  362. [    5.405416] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5,  RTO !!
  363. [    5.418286] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5,  RTO !!
  364. [    5.431011] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5,  RTO !!
  365. [    5.440989] *******************Try sd *******************
  366. [    5.452685] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  367. [    5.466587] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  368. [    5.482777] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  369. [    5.511525] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  370. [    5.527186] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  371. [    5.541140] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B
  372. [    5.554572] mmc0: new SDHC card at address 0001
  373. [    5.563013] mmcblk0: mmc0:0001 SD 14.7 GiB
  374. [    5.574405]  mmcblk0: p1 p2
  375. [    5.581117] *******************sd init ok*******************
  376. [   10.978971] systemd-udevd[111]: starting version 215
  377. [   12.850682] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  378. [   14.380525] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  379. [   14.406601] systemd[1]: Detected architecture 'arm'.
  380. [   14.574878] systemd[1]: Failed to insert module 'autofs4'
  381. [   14.588767] systemd[1]: Set hostname to <OrangePI>.
  382. [   15.464952] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  383. [   15.476999] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  384. [   15.488714] systemd[1]: Expecting device dev-ttyS0.device...
  385. [   15.501927] systemd[1]: Starting Remote File Systems (Pre).
  386. [   15.514968] systemd[1]: Reached target Remote File Systems (Pre).
  387. [   15.525161] systemd[1]: Starting Encrypted Volumes.
  388. [   15.537609] systemd[1]: Reached target Encrypted Volumes.
  389. [   15.547075] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  390. [   15.559593] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  391. [   15.571878] systemd[1]: Starting Paths.
  392. [   15.583056] systemd[1]: Reached target Paths.
  393. [   15.591261] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  394. [   15.605070] systemd[1]: Starting Swap.
  395. [   15.616150] systemd[1]: Reached target Swap.
  396. [   15.624289] systemd[1]: Expecting device dev-mmcblk0p1.device...
  397. [   15.637844] systemd[1]: Starting Root Slice.
  398. [   15.649667] systemd[1]: Created slice Root Slice.
  399. [   15.658398] systemd[1]: Starting User and Session Slice.
  400. [   15.671514] systemd[1]: Created slice User and Session Slice.
  401. [   15.681406] systemd[1]: Starting Delayed Shutdown Socket.
  402. [   15.694817] systemd[1]: Listening on Delayed Shutdown Socket.
  403. [   15.704828] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  404. [   15.719826] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  405. [   15.731294] systemd[1]: Starting Journal Socket (/dev/log).
  406. [   15.745240] systemd[1]: Listening on Journal Socket (/dev/log).
  407. [   15.755590] systemd[1]: Starting udev Control Socket.
  408. [   15.768729] systemd[1]: Listening on udev Control Socket.
  409. [   15.778244] systemd[1]: Starting udev Kernel Socket.
  410. [   15.790975] systemd[1]: Listening on udev Kernel Socket.
  411. [   15.800425] systemd[1]: Starting Journal Socket.
  412. [   15.812832] systemd[1]: Listening on Journal Socket.
  413. [   15.821897] systemd[1]: Starting System Slice.
  414. [   15.834042] systemd[1]: Created slice System Slice.
  415. [   15.842922] systemd[1]: Started File System Check on Root Device.
  416. [   15.853128] systemd[1]: Starting system-getty.slice.
  417. [   15.865764] systemd[1]: Created slice system-getty.slice.
  418. [   15.875166] systemd[1]: Starting system-serial\x2dgetty.slice.
  419. [   15.888747] systemd[1]: Created slice system-serial\x2dgetty.slice.
  420. [   15.899465] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  421. [   16.021234] systemd[1]: Mounted POSIX Message Queue File System.
  422. [   16.039592] systemd[1]: Starting udev Coldplug all Devices...
  423. [   16.193823] systemd[1]: Starting Load Kernel Modules...
  424. [   16.310814] systemd[1]: Mounted Huge Pages File System.
  425. [   16.327837] systemd[1]: Started Set Up Additional Binary Formats.
  426. [   16.340433] systemd[1]: Mounting Debug File System...
  427. [   16.446308] UMP: UMP device driver -3516ca7 loaded
  428. [   16.470387] systemd[1]: Starting LSB: Set keymap...
  429. [   16.540497] systemd[1]: Starting Journal Service...
  430. [   16.634542] systemd[1]: Started Journal Service.
  431. [   16.953310] Get mali parameter successfully
  432. [   16.961735] Init Mali gpu successfully
  433. [   16.970082] Mali: Mali device driver loaded
  434. [   17.522502] [drm] Initialized drm 1.1.0 20060810
  435. [   17.563414] mali_platform_drm_init(), driver name: mali_drm, version 0.1
  436. [   17.574403] DRM: mali_platform_drm_probe()
  437. [   17.582234] mali_drm_init(), driver name: mali_drm, version 0.1
  438. [   17.592449] DRM: mali_driver_load start
  439. [   17.592474] DRM: mali_driver_load done
  440. [   17.592482] [drm] Initialized mali_drm 0.1.0 20100520 on minor 0
  441. [   17.773369] RTL871X: module init start
  442. [   17.781063] RTL871X: rtl8189es v4.3.0.4_11916.20140724_COB
  443. [   17.787314] systemd-udevd[179]: starting version 215
  444. [   17.799334] RTL871X: build time: Nov 10 2015 10:36:42
  445. [   17.808298] [wifi_pm]: set wl_reg_on 0 !
  446. [   17.866014] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  447. [   17.880632] [mmc]: sdc1 power_supply is null
  448. [   17.900042] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  449. [   17.932348] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
  450. [   17.946343] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
  451. [   17.946384] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  452. [   17.949818] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  453. [   17.953733] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8,  RTO !!
  454. [   17.953760] *******************Try sdio*******************
  455. [   17.954574] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  456. [   17.955399] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  457. [   17.956221] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  458. [   17.957041] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  459. [   17.957060] *******************Try sd *******************
  460. [   17.957872] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  461. [   17.958697] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  462. [   17.959519] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  463. [   17.960344] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  464. [   17.960368] *******************Try mmc*******************
  465. [   17.960378] [mmc]: sdc1 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  466. [   17.961309] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 1,  RTO !!
  467. [   17.961333] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  468. [   17.961443] [mmc]: sdc1 power_supply is null
  469. [   17.964021] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  470. [   17.965545] [mmc]: sdc1 power_supply is null
  471. [   17.965995] [wifi_pm]: set wl_reg_on 1 !
  472. [   17.966170] RTL871X: module init ret=0
  473. [   17.980070] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  474. [   18.002666] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
  475. [   18.003762] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
  476. [   18.003785] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  477. [   18.006411] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  478. [   18.008602] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8,  RTO !!
  479. [   18.008629] *******************Try sdio*******************
  480. [   18.009706] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  481. [   18.010799] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  482. [   18.011892] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  483. [   18.012981] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  484. [   18.013001] *******************Try sd *******************
  485. [   18.014083] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  486. [   18.015175] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  487. [   18.016261] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  488. [   18.017348] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  489. [   18.017365] *******************Try mmc*******************
  490. [   18.017374] [mmc]: sdc1 set ios: clk 300000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  491. [   18.018572] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 1,  RTO !!
  492. [   18.018594] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  493. [   18.018703] [mmc]: sdc1 power_supply is null
  494. [   18.021090] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  495. [   18.022624] [mmc]: sdc1 power_supply is null
  496. [   18.040050] [mmc]: sdc1 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  497. [   18.063166] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
  498. [   18.064794] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
  499. [   18.064816] [mmc]: sdc1 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  500. [   18.067718] [mmc]: sdc1 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  501. [   18.070462] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8,  RTO !!
  502. [   18.070485] *******************Try sdio*******************
  503. [   18.072095] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  504. [   18.073719] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  505. [   18.075343] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  506. [   18.076964] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  507. [   18.076982] *******************Try sd *******************
  508. [   18.078596] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  509. [   18.080231] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  510. [   18.081861] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  511. [   18.083490] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  512. [   18.083513] *******************Try mmc*******************
  513. [   18.083523] [mmc]: sdc1 set ios: clk 200000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  514. [   18.085287] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 1,  RTO !!
  515. [   18.085313] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  516. [   18.085426] [mmc]: sdc1 power_supply is null
  517. [   18.088006] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  518. [   18.089530] [mmc]: sdc1 power_supply is null
  519. [   18.110038] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  520. [   18.133700] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
  521. [   18.135861] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52,  RTO !!
  522. [   18.135897] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  523. [   18.139040] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  524. [   18.142344] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8,  RTO !!
  525. [   18.142366] *******************Try sdio*******************
  526. [   18.144516] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  527. [   18.146677] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  528. [   18.148837] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  529. [   18.150995] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5,  RTO !!
  530. [   18.151015] *******************Try sd *******************
  531. [   18.153163] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  532. [   18.155321] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  533. [   18.157476] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  534. [   18.159634] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55,  RTO !!
  535. [   18.159653] *******************Try mmc*******************
  536. [   18.159662] [mmc]: sdc1 set ios: clk 150000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  537. [   18.161987] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 1,  RTO !!
  538. [   18.162037] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  539. [   18.162153] [mmc]: sdc1 power_supply is null
  540. [   20.201578] rtl8192cu: Chip version 0x10
  541. [   20.286316] rtl8192cu: MAC address: xx:xe:xx:xb:x1:xx
  542. [   20.295039] rtl8192cu: Board Type 0
  543. [   20.302308] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
  544. [   20.311887] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
  545. [   20.321907] usbcore: registered new interface driver rtl8192cu
  546. [   20.676276] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
  547. [   20.687693] rtlwifi: wireless switch is on
  548. [   27.502116] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  549. [   28.975696] systemd-journald[175]: Received request to flush runtime journal from PID 1
  550. [   46.761204] DRM: mali_lastclose
  551. [   46.975831] gmac0: probed
  552. [   46.975977] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00)
  553. [   47.050866] rtl8192cu: MAC auto ON okay!
  554. [   47.083545] rtl8192cu: Tx queue select: 0x05
  555. [   47.183435] [DISP] disp_ioctl,line:1322:para err in disp_ioctl, cmd = 0x0,screen id = 65536
  556. [   47.213163] DRM: mali_lastclose
  557. [   47.470309] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  558. [   48.267495] vmouse_input_dev_open
  559. [   50.970241] PHY: gmac0-0:00 - Link is Up - 100/Full
  560. [   74.970267] PHY: gmac0-0:00 - Link is Down
  561. [  242.509742] rtl8192cu: MAC auto ON okay!
  562. [  242.542428] rtl8192cu: Tx queue select: 0x05
  563. [  242.981449] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  564. [  251.040176] wlan0: Creating new IBSS network, BSSID xx:xx:b2:xx:6a:xx
  565. [  251.134883] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  566. [  251.884688] rtl8192cu: MAC auto ON okay!
  567. [  251.917373] rtl8192cu: Tx queue select: 0x05
  568. [  252.348220] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  569. [  363.970337] PHY: gmac0-0:00 - Link is Up - 100/Full
  570. [  363.971723] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Copy code

18

threads

303

posts

8747

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
8747
Published in 2015-11-16 21:53:50 | Show all floors
Edited by jacer at 2015-11-21 21:11

I get this error when eject flashdriver.Solved by installing eject package.
  1. Error ejecting /dev/sda: Error spawning command-line `eject "/dev/sda"': Failed to execute child process "eject" (No such file or directory) (g-exec-error-quark, 8)
Copy code

0

threads

1

posts

12

credits

Novice

Rank: 1

credits
12
Published in 2015-11-17 00:20:49 | Show all floors
Thanks for your work loboris.  Is there any guidance for setting custom resolution such as 1680x1050 on the Ubuntu Mate image?

0

threads

2

posts

30

credits

Novice

Rank: 1

credits
30
Published in 2015-11-17 01:12:23 | Show all floors
melanrz replied at 2015-11-16 16:12
Burn image and only rename right script and uimage,dont copy and replace from kernel.zip.

I tried that, too.


You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list