Linux Distributions for Orange PI H3 boards

bronco

barquerito replied at 2015-11-28 07:43
I would like to set mali400 at 533 MHz ( although GFLOPS lose , but feel that 533 (or 480) is the  ...

Maybe it's related to the 3rd set of changes listed here: http://www.orangepi.org/orangepi ... =7009&fromuid=29411

barban

wizard2015 replied at 2015-11-22 05:00
Does anyone know how to solve HDMI ovescan issue on the orange pi? Is there something like /boot/con ...

The simplest solution to solve overscan issue when using orangepi's hdmi output is by actin on your monitor/TV settings.
A different approach would be to rely on overscan_x and overscan_y parameters which are available on mainline u-boot OPI-2 is not suppoorted at the moment (support for OPI-PC and OPI-MINI has been introduced recently).

BR

Alchemist

Hello, I am using Loboris Debian XFCE img that works stable on my Orange PI PC. One thing i noticed about Sound via HDMI. Two Channel Sound is working perfectly, but Multichannel does not. For Example:
speaker-test -c 2 hw:1 ; works , speaker-test -c 8 hw:1 works with some strange downmixing Results ; left and right front are on the left front, rear left and rear right are on the right  front...

Is there any Solution to this?

Regards

jacer

I got bluetooth issue with Lubuntu Vivid distro released by loboris. Tried Debian Jessie, it works well but not Lubuntu Vivid.
I can connect with my bluetooth audio device using Lubuntu Vivid but no sound from the device, tried Debian Jessie and it works.
Here is the erro log I get. Unit bluetooth.service has failed

1. Dec 02 22:06:14 OrangePI systemd[1]: Unit bluetooth.service entered failed state
   
2. Dec 02 22:06:14 OrangePI systemd[1]: bluetooth.service failed.
   
3. Dec 02 22:06:14 OrangePI systemd[1]: bluetooth.service holdoff time over, schedu
   
4. Dec 02 22:06:14 OrangePI systemd[1]: Starting Bluetooth service...
   
5. -- Subject: Unit bluetooth.service has begun start-up
   
6. -- Defined-By: systemd
   
7. -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
   
8. --
   
9. -- Unit bluetooth.service has begun starting up.
   
10. Dec 02 22:06:14 OrangePI bluetoothd[2263]: Bluetooth daemon 4.101
    
11. Dec 02 22:06:14 OrangePI bluetoothd[2263]: bluetoothd[2263]: Bluetooth daemon 4.
    
12. Dec 02 22:06:14 OrangePI bluetoothd[2263]: D-Bus setup failed: Name already in u
    
13. Dec 02 22:06:14 OrangePI bluetoothd[2263]: Unable to get on D-Bus
    
14. Dec 02 22:06:14 OrangePI systemd[1]: bluetooth.service: main process exited, cod
    
15. Dec 02 22:06:14 OrangePI bluetoothd[2263]: bluetoothd[2263]: Unable to get on D-
    
16. Dec 02 22:06:14 OrangePI systemd[1]: Failed to start Bluetooth service.
    
17. -- Subject: Unit bluetooth.service has failed
    
18. -- Defined-By: systemd
    
19. -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    
20. --
    
21. -- Unit bluetooth.service has failed.
    
22. --
    
23. -- The result is failed.
    
24. Dec 02 22:06:14 OrangePI systemd[1]: Unit bluetooth.service entered failed state
    
25. Dec 02 22:06:14 OrangePI systemd[1]: bluetooth.service failed.
    
26. Dec 02 22:06:14 OrangePI systemd[1]: bluetooth.service holdoff time over, schedu
    
27. Dec 02 22:06:14 OrangePI systemd[1]: start request repeated too quickly for blue
    
28. Dec 02 22:06:14 OrangePI systemd[1]: Failed to start Bluetooth service.
    
29. -- Subject: Unit bluetooth.service has failed
    
30. -- Defined-By: systemd
    
31. -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    
32. --
    
33. -- Unit bluetooth.service has failed.
    
34. --
    
35. -- The result is failed.
    
36. Dec 02 22:06:14 OrangePI systemd[1]: Unit bluetooth.service entered failed state
    
37. Dec 02 22:06:14 OrangePI systemd[1]: bluetooth.service failed.

Copy code

jacer

loboris, can you add this to your kernel?
https://github.com/linux-sunxi/l ... -dev/kernel-headers

igortski

ThunderBRZ replied at 2015-11-28 09:16
i need a linux-headers pkg to install my asterisk. i have cloned a kernel from github, after that, h ...

I have asterisk with Freepbx ui running on an Orange Pi PC. I installed Ubuntu Mate 15.04 from Loboris. Here's a link on how to install asterisk and Freepbx: http://wiki.freepbx.org/display/ ... u+Server+14.04+LTS. Don't install DAHDI or LIBPRI, you won't need them. Do install all the required dependencies except kernel-headers package. Everything will compile just fine, it just takes a while to do everything.

Evert

defalkner

Npeti replied at 2015-11-16 03:16
Hello guys!

I got my Opi in the last week. But I'm really disappointed. I read loboris' articles to ...

Maybe your keyboard requires too much power for the USB hub. Gaming keyboards will have this issue.

n890n

How to change the video resolution in the kali linux 2.0 system? rebuild u-boot by myself? how to build? what should i do?

n890n

This Is like i see.with 720.i dont see all the screen .

Xabaras

Excuse me, how is possible to use orange pi pc on an old crt tv?How is in this case the correct configuration of script.bin?I connect with av cable, but I have black screen...On an other tv with hdmi connection always works well, but I need to use crt tv...
Please help a beginner member