please choosego to mobile | Continue to access the PC version
View: 5354|Reply: 2

Orange Pi IOT 2 G Wvdial problem

[Copy link]

1

threads

5

posts

52

credits

Registered member

Rank: 2

credits
52
Published in 2018-3-28 06:36:35 | Show all floors |Read mode
Edited by rje1974 at 2018-3-28 06:38

I ´m lost and I need help.. I'm trying to setup a modem in Argentina for Claro company and I´m lost..
Here is my wvdial.conf



[Dialer Defaults]
ISDN = 0
Modem Type = Analog Modem
Stupid Mode = 1
Phone = *99#
Dial Command = ATDT
Modem = /dev/modem0
Baud = 9600
Init1 = ATE1
Init2 = AT+CGDCONT=1,"IP","igprs.claro.com.ar"
Username = clarogprs
Password = clarogprs999

And here the output...

root@OrangePi:~# sudo wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATE1
ATE1
OK
--> Sending: AT+CGDCONT=1,"IP","igprs.claro.com.ar"
AT+CGDCONT=1,"IP","igprs.claro.com.ar"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Tue Mar 27 22:34:50 2018
--> Pid of pppd: 1281
--> pppd: ▒gM
--> pppd: ▒gM
--> Using interface ppp0
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> Terminate Request (Message: "No network protocols running" )
--> pppd: ▒gM
--> pppd: ▒gM
--> pppd: ▒gM
--> Disconnecting at Tue Mar 27 22:35:21 2018
--> The PPP daemon has died: PPP negotiation failed (exit code = 10)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 10)
Thanks...

PD: I read surferos guides.. But may be i'm puting them wrong..


1

threads

5

posts

52

credits

Registered member

Rank: 2

credits
52
 Author| Published in 2018-4-1 23:31:19 | Show all floors
Edited by rje1974 at 2018-4-2 04:28

SOLVED, the problem is that the board doesn't have a valid IMEI and you have to fix it by burning one on it. Here I post a solution in my blog in spanish.

Bye..


62

threads

653

posts

5206

credits

Administrator

Rank: 9Rank: 9Rank: 9

credits
5206
Published in 2018-4-3 19:35:48 | Show all floors
rje1974 replied at 2018-4-1 23:31
SOLVED, the problem is that the board doesn't have a valid IMEI and you have to fix it by burning on ...

Thanks for your share!
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list