Please select To the mobile version | Continue to access the desktop computer version


Hot search: orangepi
View: 1071|Reply: 0

mPCIE device/port not powered in battery mode - OPi RK3399

[Copy link]








Rank: 1

Post time 2019-7-18 02:31:05 | Show all posts |Read mode
Hi. I'm using an OrangePi RK3399 and if the power supply from the 12V barrel jack is removed, the LTE module connected to the mPCIE port dies. Does anybody know how to make the mPCIE port work while on battery?
The mPCIE dying is due to the port being powered from the main power supply line VBUS from the barrel jack (before the BQ25700a battery charger IC, according to the board's schematics). I don't know why power is not supplied from VSYS like everything else on the board. So, what I've found is that if I want to power the mPCIE port from the battery, the reverse OTG mode from the BQ25700a battery charger IC would need to be set (allowing voltage to flow from the battery to VBUS). The problem is that even if the correct register on the BQ25700a is set, there is a resistor from the OTG Enable pin connected to GND, overriding any software configuration.

Am I missing something or is there no way to mantain the LTE module on the mPCIE port working while powered from batteries?
You have to log in before you can reply Login | Register

Points Rules

Archiver|Mobile edition|Darkroom|OrangePi En ( 粤ICP备14086627号-2

2020-5-31 05:11 GMT+8 , Processed in 0.025236 second(s), 23 queries .

Powered by Discuz! X3.2

© 2014-2015 orangepibbs en.

Quick Reply To Top Return to the list