orange pi 3.5" TFT LCD Touch Screen RGB SPI

lupin982

Please onyone can help me to use this display:

http://www.ebay.it/itm/161857872767?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I'm trying with "LCD_show.tar.gz" driver

http://www.waveshare.com/wiki/3.5inch_RPi_LCD_(A)

on debian and on raspbian but It does not work.

Thanks,
Francesco

majsi

This driver package is for RPI2 (is not compatible)
And this displays is not for Orange pi. Orange pi dont have spi0-cs1 on pin 26. You must create own driver to SPI what using PA21(pin 26) as cs1.

lupin982

Is there a spi touch display for orangepi?
I think the support for the orange pi pc is not yet very good. The wiki page is not completed and the compatibility with RPI is not real.
I can't find any information about compatible touch display.
Till now i found many difficulties to use gpio, spi and i2c via c or c++.
I hope the support will improve soon.
The device has great potential, but it has many problem, i.e. of the 3 usb using debian, only one works, the other 2 are not powered.

beee

http://www.orangepi.org/orangepi ... wthread&tid=879

beee

http://www.orangepi.org/orangepi ... wthread&tid=879

zgoda

You have to build notro's fbtft for kernel 3.4 and try manual configuration of flexfb and fbtft_device. Simple "hat" type connection will not work because SPI pinout is different.