Changes

If the Orange Pi pi has connect already connected to wire cablebefore powered on, then the system would obtain get the IP address automatically. If there is no it has not connected to wire cable connectingor other problem of network, then it will fail to get the IP address. The system would fail at obtaining IP address which could cause take some time to load but it has no influence for the booting delayboard running.<br>After connecting to wired network, it It should be green LED lighting light on and yellow LED flashingflash. You need to make sure the image you wrote is correspondent accordingly to the board you use, since there are some boards are 100M Ethernet but board that is Megabit and some are 1000M EthernetGigabit which could not be used mixed .<br>100M Ethernet Megabit is using internal phy, here is the configuration just like the following:<br>

1000M Ethernet Gigabit is using external phy, here is the configuration: <br>1 indicates external phy

The above configuration has been It is defaulted configured, you could refer to it when usingtake that as reference.<br>