Changes

← Older edit

Orange Pi 5

100 bytes added, 16:32, 25 April 2023

→‎How to burn Orange Pi OS (Droid) image to TF card

{| class="wikitable" style="background-color:#ffffdc;width:800px;"

|-

| <big>'''Note that the Linux image mentioned here specifically refers to the image of the Linux distributions such as Debian or Ubuntu downloaded from the Orange Pi ~~data~~ download page.'''</big>

|}

==== How to use balenaEtcher to burn Linux image ====

1) First prepare a TF card with a capacity of 16GB or more. The transmission speed of the TF card must be class 10 or above. It is recommended to use a TF card of SanDisk and other brands

2) Then use the card reader to insert the TF card into the computer

3) Download the Linux operating system image file compression package that you want to burn from [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi ~~data~~ download page], and then use the decompression software to decompress it. Among the decompressed files, the file ending with ".img" is the image file of the operating system. The size is generally more than 2GB

4) Then download the burning software of Linux image——balenaEtcher, the download address is

<big>'''https://www.balena.io/etcher/'''</big>

9) After burning the Linux image, balenaEtcher will also verify the image burned into the TF card by default to ensure that there is no problem in the burning process. As shown in the figure below, a green progress bar indicates that the image has been burnt, and balenaEtcher is verifying the burnt image

[[Image:Pi-5-details-pic08.png]]

10) After successful burning, the display interface of balenaEtcher is shown in the figure below. If a green indicator icon is displayed, it means that the image burning is successful. At this time, you can exit balenaEtcher, and then pull out the TF card and insert it into the TF card slot of the development board for ~~use up~~using

[[Image:Pi-5-details-pic09.png]]

==== How to use Win32Diskimager to burn Linux image ====

[[How to use Win32Diskimager to burn Linux image | How to use Win32Diskimager to burn Linux image]]。 You can also consult the following in ~~the~~ [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi 5 user manual:]

* Method of burning Linux image to TF card based on Ubuntu PC

* How to write Linux image to SPI Flash+NVMe SSD

1) First prepare a TF card with 8GB or larger capacity. The transmission speed of the TF card must be class10 or above. It is recommended to use a TF card of SanDisk and other brands

2) Then use the card reader to insert the TF card into the computer

3) Then download the SDDiskTool programming tool from [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi ~~data~~ download page]，'''please ensure that the version of the SDDiskTool tool is the latest v1.72''' 4) Then download the Android12 image from [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi ~~data~~ download page]

a. After opening the download link of the Android image, you can see the following three types of Android images, please select the image in the TF card image folder to download

[[Image:Pi-5-details-pic10.png]]

7) After opening '''SDDiskTool''', if the TF card is recognized normally, the inserted disk device will be displayed in the '''"Select Removable Disk Device"''' column. '''Please make sure that the displayed disk device is consistent with the drive letter of the TF card you want to burn''', if there is no display, you can try to unplug the TF card

[[Image:Pi-5-details-pic13.png]]

8) After confirming the drive letter, you can format the TF card first, click the '''~~restore disk~~Restore''' button in SDDiskTool, or use the '''SD Card Formatter''' mentioned above to format the TF card

[[Image:Pi-5-details-pic14.png]]

9) Then start writing the Android image to the TF card

a. First check '''"SD Boot"''' in '''"~~Select Function Mode~~Choose function mode"''' b. Then select the path of the Android image in the "~~Select to upgrade~~ Choose firmware" column c. Finally, click the '''"~~Start~~ Create"''' button to start burning the Android image to the TF card

[[Image:Pi-5-details-pic15.png]]

10) After burning, you can exit the SDDiskTool software, and then you can pull out the TF card from the computer and insert it into the development board to start

1) First prepare a TF card with 8GB or larger capacity. The transmission speed of the TF card must be class10 or above. It is recommended to use a TF card of SanDisk and other brands

2) Then use the card reader to insert the TF card into the computer

3) Then download the SDDiskTool programming tool from [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi ~~data~~ download page], '''please ensure that the version of the SDDiskTool tool is the latest v1.72''' 4) Then download the Orange Pi OS (Droid) image from [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi ~~data~~ download page]

a. After opening the download link of the Orange Pi OS (Droid) image, you can see the following two types of images, please choose the image without '''spi-nvme'''

[[Image:Pi-5-details-pic17.png]]

[[Image:Pi-5-details-pic18.png]]

7) After opening '''SDDiskTool''', if the TF card is recognized normally, the inserted disk device will be displayed in the '''"Select Removable Disk Device"''' column. '''Please make sure that the displayed disk device is consistent with the drive letter of the TF card you want to burn''', if there is no display, you can try to unplug the TF card

[[Image:Pi-5-details-~~pic19~~pic13.png]] 8) After confirming the drive letter, you can format the TF card first, click the '''~~restore disk~~Restore''' button in SDDiskTool, or use the '''SD Card Formatter''' mentioned above to format the TF card [[Image:Pi-5-details-~~pic20~~pic14.png]]

9) Then start to write the Orange Pi OS (Droid) image to the TF card

a. First check '''"SD Boot"''' in '''"~~Select Function Mode~~Choose function mode"''' b. Then select the path of the Orange Pi OS (Droid) image in the '''"~~Select to upgrade~~ Choose firmware"''' column c. Finally, click the '''"~~Start~~ Create"''' button to start burning the Orange Pi OS (Droid) image to the TF card [[Image:Pi-5-details-~~pic21~~pic15.png]]

10) After burning, you can exit the SDDiskTool software, and then you can pull out the TF card from the computer and insert it into the development board to start

[[Image:Pi-5-details-~~pic22~~pic16.png]]

You can also consult the following in the [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html Orange Pi 5 user manual:]

* Burn Orange Pi OS (Droid) image to SPIFlash + NVMe SDD

=== Start Orange Pi 5 ===

1) Insert the TF card with the burned image into the TF card slot of the Orange Pi development board. If the image of SPIFlash+NVMe SSD has been burnt, then there is no need to insert a TF card, just make sure that the NVMe SSD is inserted into the development board normally. 2) The development board has an HDMI interface, and the development board can be connected to a TV or HDMI display through an HDMI-to-HDMI cable. If you buy an LCD screen, you can also use the LCD screen to display the system interface of the development board. If there is a Type-C to HDMI cable, the system interface of the development board can also be displayed through the Type-C interface. 3) Connect a USB mouse and keyboard to control the Orange Pi development board. 4) The development board has an Ethernet port, which can be plugged into a network cable for Internet access.

5) Connect a high-quality power adapter with a 5V/4A USB Type-C interface.

[[Image:Pi-5-details-pic23.png]]

[[Image:Pi-5-details-pic24.png]]

6) Then turn on the switch of the power adapter. If everything is normal, you can see the startup screen of the system on the HDMI monitor or LCD screen.

7) If you want to view the output information of the system through the debugging serial port, please use the serial cable to connect the development board to the computer. For the connection method of the serial port, please refer to the section on how to use the debugging serial port in [http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi 5 user manual:]

=== Linux system instructions ===

Ubuntu images and Debian images are generally referred to as Linux images (they both use the Linux kernel), so when you see a Linux image or Linux system in the manual, it refers to a image or system like Ubuntu or Debian. Many people will have doubts about whether they can use pure Ubuntu or pure Debian systems (pure here can be understood as systems downloaded from Ubuntu or Debian official websites). The answer is no, because Ubuntu and Debian do not provide an adapted system for the Orange Pi development board. We can see from the official websites of Ubuntu and Debian that they both support the arm64 architecture (the SOC of the development board is the arm64 architecture), but please note that the support mentioned here refers only to the arm64 version of the software warehouse provided by Ubuntu or Debian (including Tens of thousands of software packages) or rootfs (these are the packages that Orange Pi uses when making Ubuntu or Debian systems). To make an Ubuntu or Debian system that can be used for a certain development board also needs to transplant U-boot and Linux kernel, etc., as well as repair the encountered bugs and optimize some functions, all of which are done by Orange Pi. If Linux distributions such as CentOS, Kali, or OpenWRT are not ported by other developers or ported and adapted by themselves, they cannot be used on the development board of Orange Pi (hardware running these systems is no problem).

In addition, people often ask whether the system of other development boards can be used on the Orange Pi development board. The answer is no, because the chips and circuit connections used by different development boards are generally different. A system developed for a certain development board basically cannot be used on other development boards.

1）[[Supported Linux image types and kernel versions | Supported Linux image types and kernel versions]]

Admin

Bureaucrats, Administrators

6,556

edits

Wiki-Orange Pi β

Changes

Orange Pi 5

Wiki-Orange Pi ^β