==== 使用 How to use balenaEtcher 烧录 to burn Linux 镜像的方法 image ====1) 首先准备一张 First prepare a TF card with a capacity of 16GB 或更大容量的TF卡，TF卡的传输速度必须为 class10 级或class10 级以上，建议使用闪迪等品牌的TF卡。or more. The transmission speed of the TF card must be class 10 or above. It is recommended to use a TF card of SanDisk and other brands<br>2) 然后使用读卡器把 Then use the card reader to insert the TF 卡插入电脑。card into the computer<br>3) 从 Download the Linux operating system image file compression package that you want to burn from the Orange Pi 的资料下载页面下载想要烧录的 Linux 操作系统镜像文件压缩包， 然后使用解压软件解压，解压后的文件中，以“data download page, and then use the decompression software to decompress it. Among the decompressed files, the file ending with ".img" is the image file of the operating system.img”结尾的文件就是操作系统的镜像文件，大小一般都在 The size is generally more than 2GB 以上。<br>4) 然后下载 Then download the burning software of Linux 镜像的烧录软件——balenaEtcher，下载地址为：image——balenaEtcher, the download address is<br>

5) 进入 After entering the balenaEtcher 下载页面后，点击绿色的下载按钮就可以下载 download page, click the green download button to download the installation package of balenaEtcher 的安装包，也可以通过下拉框选择 . You can also select the Portable version of the balenaEtcher 的 software through the drop-down box. The Portable 版本的软件，Portable 版本无需安装，双击打开就可以使用。version does not need to be installed, and it can be used by double-clicking to open it<br><br>

6) 如果下载的是需要安装版本的 balenaEtcher，请先安装再使用。如果下载的Portable 版本 balenaEtcher，直接双击打开即可，打开后的 If the downloaded version of balenaEtcher 界面如下图所示：needs to be installed, please install it before using it. If you downloaded the Portable version of balenaEtcher, just double-click to open it. The opened balenaEtcher interface is shown in the figure below<br><br>

7) 使用 The specific steps to use balenaEtcher 烧录 to burn the Linux 镜像的具体步骤如下所示：image are as follows<br>a. 首先选择要烧录的 First select the path of the Linux 镜像文件的路径image file to be burned<br>b. 然后选择 Then select the drive letter of the TF 卡的盘符card<br>c. 最后点击 Finally, click Flash 就会开始烧录 to start burning the Linux 镜像到 image to the TF 卡中card<br><br>

8) The interface displayed in the process of burning the Linux image by balenaEtcher 烧录 Linux 镜像的过程显示的界面如下图所示，另外进度条显示紫色表示正在烧录 is shown in the figure below, and the progress bar displays purple, indicating that the Linux 镜像到 image is being burned into the TF 卡中。card<br><br>

9) After burning the Linux 镜像烧录完后，balenaEtcher 默认还会对烧录到 image, balenaEtcher will also verify the image burned into the TF 卡中的镜像进行校验， 确保烧录过程没有出问题。如下图所示，显示绿色的进度条就表示镜像已经烧录完成，balenaEtcher 正在对烧录完成的镜像进行校验。card by default to ensure that there is no problem in the burning process. As shown in the figure below, a green progress bar indicates that the image has been burnt, and balenaEtcher is verifying the burnt image<br><br>

10) 成功烧录完成后 After successful burning, the display interface of balenaEtcher 的显示界面如下图所示，如果显示绿色的指示图标说明镜像烧录成功，此时就可以退出 balenaEtcher，然后拔出 TF 卡插入到开发板的 is shown in the figure below. If a green indicator icon is displayed, it means that the image burning is successful. At this time, you can exit balenaEtcher, and then pull out the TF 卡槽中使用了。<br><br>==== 使用 RKDevTool 烧录 Linux 镜像到 card and insert it into the TF 卡中的方法 ====<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#.E4.BD.BF.E7.94.A8_RKDevTool_.E7.83card slot of the development board for use.A7.E5.BD.95_Linux_.E9.95.9C.E5.83.8F.E5.88.B0_TF_.E5.8D.A1.E4.B8.AD.E7.9A.84.E6.96.B9.E6.B3.95 使用 RKDevTool 烧录 Linux 镜像到 TF 卡中的方法]</span>。up<br><br>

==== 使用 How to use Win32Diskimager 烧录 to burn Linux 镜像的方法 image ====<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E4.BD.BF.E7.94.A8_Win32Diskimager_.E7.83.A7.E5.BD.95_Linux_.E9.95.9C.E5.83.8F.E7.9A.84.E6.96.B9.E6.B3.95 使用 How to use Win32Diskimager to burn Linux image | How to use Win32Diskimager 烧录 to burn Linux 镜像的方法image]]</span>。<br><br>你也可以在You can also consult the following in the<span style="color:#0066CC;">[http://www.orangepi.cnorg/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html Orange Pi 5用户手册5 user manual:]</span>中查阅：* 基于Ubuntu Method of burning Linux image to TF card based on Ubuntu PC 将Linux 镜像烧写到TF 卡的方法* 烧写Linux 镜像到SPIFlashHow to write Linux image to SPI Flash+NVMe SSD 中的方法* 烧写Linux 镜像到SPIFlashHow to write Linux image to SPI Flash+SATA SSD 中的方法* 烧写Linux 镜像到SPIFlashHow to write Linux image to SPIFlash+USB 存储设备中的方法storage device

=== 烧录 How to burn Android 镜像到 image to TF 卡中的方法 card ===1) 首先准备一张 First prepare a TF card with 8GB 或更大容量的TF 卡，TF 卡的传输速度必须为 '''or larger capacity. The transmission speed of the TF card must be class10''' 或以上，建议使用闪迪等品牌的 or above. It is recommended to use a TF 卡card of SanDisk and other brands<br><br>2) 然后使用读卡器把 Then use the card reader to insert the TF 卡插入电脑card into the computer<br><br>3) 然后从Then download the SDDiskTool programming tool from <span style="color:#0066CC;">[http://www.orangepi.cnorg/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi 的资料下载页面data download page]</span>下载SDDiskTool 烧写工具，请确保，'''<span style="color:#FF0000">please ensure that the version of the SDDiskTooltool is the latest v1.72</span>'''工具的版本为最新的 v1.72<br><br>4) 然后从Then download the Android12 image from <span style="color:#0066CC;">[http://www.orangepi.cnorg/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi 的资料下载页面data download page]</span>下载 Android12 的镜像<br>a. 打开安卓镜像的下载链接后可以看到下面三种类型的安卓镜像，请选择 '''TF卡镜像'''文件夹中的镜像进行下载After opening the download link of the Android image, you can see the following three types of Android images, please select the image in the TF card image folder to download<br><br>

b. 进入 '''TF卡镜像'''文件夹后可以看到下面两个镜像，它们的区别是：After entering the TF card image folder, you can see the following two images, the difference between them is:<br>a) 不带 The image without lcd 的镜像是专门用于 is specially used for HDMI 显示的，支持 display and supports 8K 显示，如果不使用 display. If you do not use the LCD 屏幕，请下载不带 screen, please download the image without lcd 的镜像<br>b) 如果要使用 If you want to use LCD 屏幕，请选择带 screen, please choose image with lcd 的镜像<br><br>

5) 然后使用解压软件解压下载的 Then use the decompression software to decompress the compressed package of the downloaded Android 镜像的压缩包，解压后的文件中，以“image.img” 结尾的文件就是 Among the decompressed files, the file ending with ".img" is the Android 镜像文件，大小在 image file, and the size is more than 1GB 以上<br><br>6) 然后使用解压软件解压 Then use decompression software to decompress '''SDDiskTool_v1.72.zip'''，此软件无需安装，在解压后的文件夹中找到 , this software does not need to be installed, just find '''SD_Firmware_Tool.exe''' 打开即可in the decompressed folder and open it<br><br>

7) 打开 After opening '''SDDiskTool 后，如果 ''', if the TF 卡识别正常，会在“选择可移动磁盘设备”一栏中显示插入的磁盘设备，请务必确认显示的磁盘设备和你想烧录的TF 卡的盘符是一致的，如果没有显示可以尝试拔插下 card is recognized normally, the inserted disk device will be displayed in the '''"Select Removable Disk Device"''' column. '''<span style="color:#FF0000">Please make sure that the displayed disk device is consistent with the drive letter of the TF 卡card you want to burn</span>''', if there is no display, you can try to unplug the TF card<br><br>

8) 确认完盘符后，可以先格式化下 After confirming the drive letter, you can format the TF 卡，点击 SDDiskTool 中的card first, click the '''恢复磁盘restore disk'''按钮即可，也可使用前面提到的 button in SDDiskTool, or use the '''SD Card Formatter''' 进行 mentioned above to format the TF 卡的格式化card<br><br>[[Image:Pi-5-details-pic13.1.png]]<br><br>9) 然后开始将 Then start writing the Android 镜像写入 image to the TF 卡card<br>a. 首先在“选择功能模式”中勾选“SD 启动”First check '''"SD Boot"''' in '''"Select Function Mode"'''<br>b. 然后在“选择升级固件”一栏中选择 Then select the path of the Android 镜像的路径image in the "Select to upgrade firmware" column<br>c. 最后点击“开始创建”按钮就会开始烧录 Finally, click the '''"Start Create"''' button to start burning the Android 镜像到 image to the TF 卡中card<br><br>[[Image:Pi-5-details-pic14.1.png]]<br><br>10) 烧录完后即可退出 After burning, you can exit the SDDiskTool 软件，然后就可以把 software, and then you can pull out the TF 卡从电脑中拔出来插到开发板中启动了card from the computer and insert it into the development board to start<br><br>[[Image:Pi-5-details-pic15.1.png]]<br><br>你也可以在You can also consult the following in the <span style="color:#0066CC;">[http://www.orangepi.cnorg/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html Orange Pi 5用户手册5 user manual:]</span>中查阅：<br>* 烧录Android 镜像到SPIFlashHow to burn Android image to SPI Flash+NVMe SSD 中的方法* 烧录Android 镜像到SPIFlashHow to burn Android image to SPI Flash+SATA SSD 中的方法

=== 烧录 How to burn Orange Pi OS (Droid)镜像到 image to TF 卡中的方法 card ==={| class="wikitable" style="background-color:#ffffdc;width:800px;" |-| <br><big>'''注意，下面所有的操作都是在 Windows 电脑中进行的。'''</big><br><br>|}1) 首先准备一张 First prepare a TF card with 8GB 或更大容量的TF 卡，TF 卡的传输速度必须为 '''or larger capacity. The transmission speed of the TF card must be class10''' 或以上，建议使用闪迪等品牌的 or above. It is recommended to use a TF 卡card of SanDisk and other brands<br><br>2) 然后使用读卡器把 Then use the card reader to insert the TF 卡插入电脑card into the computer<br><br>3) 然后从Then download the SDDiskTool programming tool from <span style="color:#0066CC;">[http://www.orangepi.cnorg/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi 的资料下载页面data download page]</span>下载SDDiskTool 烧写工具，请确保, '''<span style="color:#FF0000">please ensure that the version of the SDDiskTooltool is the latest v1.72</span>'''工具的版本为最新的 v1.72<br><br>4) 然后从Then download the Orange Pi OS (Droid) image from <span style="color:#0066CC;">[http://www.orangepi.cnorg/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi 的资料下载页面data download page]</span>下载Orange <br>a. After opening the download link of the Orange Pi OS (Droid)的镜像image,打开 Orange Pi OS (Droid)镜像的下载链接后可以看到下面三种类型的镜像，请选择下面的镜像you can see the following two types of images, please choose the image without '''spi-nvme'''<br><br>

5) 然后使用解压软件解压下载的 Then use the decompression software to decompress the compressed package of the downloaded Orange Pi OS (Droid)镜像的压缩包，解压后的文件中，以“image.img” 结尾的文件就是 Among the decompressed files, the file ending with ".img" is the Orange Pi OS (Droid)镜像文件，大小在 image file, and the size is more than 1GB 以上<br><br>6) 然后使用解压软件解压 Then use decompression software to decompress '''SDDiskTool_v1.72.zip'''，此软件无需安装，在解压后的文件夹中找到 , this software does not need to be installed, just find '''SD_Firmware_Tool.exe''' 打开即可in the decompressed folder and open it<br><br>

7) 打开 After opening '''SDDiskTool 后，如果 ''', if the TF 卡识别正常，会在“选择可移动磁盘设备”一栏中显示插入的磁盘设备，请务必确认显示的磁盘设备和你想烧录的 card is recognized normally, the inserted disk device will be displayed in the '''"Select Removable Disk Device"''' column. '''<span style="color:#FF0000">Please make sure that the displayed disk device is consistent with the drive letter of the TF 卡的盘符是一致的，如果没有显示可以尝试拔插下 card you want to burn</span>''', if there is no display, you can try to unplug the TF 卡card<br><br>

8) 确认完盘符后，可以先格式化下 After confirming the drive letter, you can format the TF 卡，点击 SDDiskTool 中的card first, click the '''恢复磁盘restore disk'''按钮即可，也可使用前面提到的 button in SDDiskTool, or use the '''SD Card Formatter''' 进行 mentioned above to format the TF 卡的格式化card<br><br>

9) 然后开始将 Then start to write the Orange Pi OS (Droid)镜像写入 image to the TF 卡card<br>a. 首先在“选择功能模式”中勾选“SD 启动”First check '''"SD Boot"''' in '''"Select Function Mode'''<br>b. 然后在“选择升级固件”一栏中选择 Then select the path of the Orange Pi OS (Droid)镜像的路径image in the '''"Select to upgrade firmware"''' column<br>c. 最后点击“开始创建”按钮就会开始烧录 Finally, click the '''"Start Create"''' button to start burning the Orange Pi OS (Droid)镜像到 image to the TF 卡中card<br><br>

10) 烧录完后即可退出 After burning, you can exit the SDDiskTool 软件，然后就可以把 software, and then you can pull out the TF 卡从电脑中拔出来插到开发板中启动了card from the computer and insert it into the development board to start<br><br>

你也可以在You can also consult the following in the <span style="color:#0066CC;">[http://www.orangepi.cnorg/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html Orange Pi 5用户手册5 user manual:]</span>中查阅：<br>* 烧录Orange Burn Orange Pi OS (Droid)镜像到SPIFlashimage to SPIFlash +NVMe SSD 中的方法* 烧录Orange Pi OS (Droid)镜像到SPIFlash+SATA SSD 中的方法SDD

=== 启动Orange Start Orange Pi 5 ===1) 将烧录好镜像的 Insert the TF 卡插入香橙派开发板的 TF卡插槽中。如果 card with the burned image into the TF card slot of the Orange Pi development board. If the image of SPIFlash+NVMe SSD 已经烧录好镜像了，那么就不需要插入 TF卡了，只需确保 has been burnt, then there is no need to insert a TF card, just make sure that the NVMe SSD 正常插入到开发板中即可。is inserted into the development board normally.<br>2) 开发板有HDMI 接口，可以通过HDMI 转HDMI 连接线把开发板连接到电视或者 The development board has an HDMI 显示器。如果有购买 interface, and the development board can be connected to a TV or HDMI display through an HDMI-to-HDMI cable. If you buy an LCD 屏幕，也可以使用 screen, you can also use the LCD 屏幕来显示开发板的系统界面。如果有 screen to display the system interface of the development board. If there is a Type-C 转 to HDMI 的线，也可以通过 cable, the system interface of the development board can also be displayed through the Type-C 接口来显示开发板的系统界面。interface.<br>3) 接上 Connect a USB 鼠标和键盘，用于控制香橙派开发板。mouse and keyboard to control the Orange Pi development board.<br>4) 开发板有以太网口，可以插入网线用来上网。The development board has an Ethernet port, which can be plugged into a network cable for Internet access.<br>5) 连接一个 Connect a high-quality power adapter with a 5V/4A 的 USB Type-C 接口的高品质的电源适配。* 切记不要插入电压输出大于 5V 的电源适配器，会烧坏开发板。* 系统上电启动过程中很多不稳定的现象基本都是供电有问题导致的，所以一个靠谱的电源适配器很重要。如果启动过程中发现有不断重启的现象，请更换下电源或者 Type-C 数据线再试下。* '''interface.<span style="color:#FF0000"br>Type-C 电源接口是不支持 PD 协商的。</span>'''* 另外请不要接到电脑的USB 接口来给开发板供电。<br>

[[Image:Pi-5-details-pic23.png]]<br><br>6) 然后打开电源适配器的开关，如果一切正常，此时 Then turn on the switch of the power adapter. If everything is normal, you can see the startup screen of the system on the HDMI 显示器或者 monitor or LCD 屏幕就能看到系统的启动画面了。screen.<br>7) 如果想通过调试串口查看系统的输出信息，请使用串口线将开发板连接到电脑， 串口的连接方法请参看If you want to view the output information of the system through the debugging serial port, please use the serial cable to connect the development board to the computer. For the connection method of the serial port, please refer to the section on how to use the debugging serial port in <span style="color:#0066CC;">[http://www.orangepi.cnorg/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi 5用户手册5 user manual:]</span>中“调试串口的使用方法”一节。<br><br>

=== Linux系统使用说明 Linux system instructions ===Ubuntu images and Debian images are generally referred to as Linux images (they both use the Linux kernel), so when you see a Linux image or Linux system in the manual, it refers to a image or system like Ubuntu or Debian.<br>Many people will have doubts about whether they can use pure Ubuntu or pure Debian systems (pure here can be understood as systems downloaded from Ubuntu or Debian official websites). The answer is no, because Ubuntu and Debian do not provide an adapted system for the Orange Pi development board.<br>We can see from the official websites of Ubuntu and Debian that they both support the arm64 architecture (the SOC of the development board is the arm64 architecture), but please note that the support mentioned here refers only to the arm64 version of the software warehouse provided by Ubuntu or Debian (including Tens of thousands of software packages) or rootfs (these are the packages that Orange Pi uses when making Ubuntu or Debian systems). To make an Ubuntu or Debian system that can be used for a certain development board also needs to transplant U-boot and Linux kernel, etc., as well as repair the encountered bugs and optimize some functions, all of which are done by Orange Pi.<br>If Linux distributions such as CentOS, Kali, or OpenWRT are not ported by other developers or ported and adapted by themselves, they cannot be used on the development board of Orange Pi (hardware running these systems is no problem).<br>In addition, people often ask whether the system of other development boards can be used on the Orange Pi development board. The answer is no, because the chips and circuit connections used by different development boards are generally different. A system developed for a certain development board basically cannot be used on other development boards.<br><br>1）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E5.B7.B2.E6.94.AF.E6.8C.81.E7.9A.84Linux_.E9.95.9C.E5.83.8F.E7.B1.BB.E5.9E.8B.E5.92.8C.E5.86.85.E6.A0.B8.E7.89.88.E6.9C.AC 已支持的Linux 镜像类型和内核版本Supported Linux image types and kernel versions | Supported Linux image types and kernel versions]]</span><br> 2）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9D.BF.E8.BD.BDLED_.E7.81.AF.E6.B5.8B.E8.AF.95.E8.AF.B4.E6.98.8E 板载LED 灯测试说明Onboard LED Light Test Instructions | Onboard LED Light Test Instructions]]</span><br>3）网络连接测试 3） Network connection test<br>查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_.E4.BB.A5.E5.A4.AA.E7.BD.91.E5.8F.A3.E6.B5.8B.E8.AF.95 以太网口测试Ethernet port test | Ethernet port test]]</span><br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_WIFI_.E8.BF.9E.E6.8E.A5.E6.B5.8B.E8.AF.95 WIFI 连接测试connection test | WIFI connection test]]</span><br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_.E8.AE.BE.E7.BD.AE.E9.9D.99.E6.80.81_IP_.E5.9C.B0.E5.9D.80.E7.9A.84.E6.96.B9.E6.B3.95 设置静态 How to set a static IP address | How to set a static IP 地址的方法address]]</span><br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_AP6275P_PCIe_.E7.BD.91.E5.8D.A1.E7.9A.84.E4.BD.BF.E7.94.A8.E6.96.B9.E6.B3.95 How to use AP6275P PCIe network card | How to use AP6275P PCIe 网卡的使用方法network card]]</span><br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_AP6275P_PCIe_.E7.BD.91.E5.8D.A1.E9.80.9A.E8.BF.87_create_ap_.E5.88.9B.E5.BB.BA_WIFI_.E7.83.AD.E7.82.B9.E7.9A.84.E6.96.B9.E6.B3.95 AP6275P PCIe 网卡通过 NIC creates WIFI hotspot via create_ap 创建 | AP6275P PCIe NIC creates WIFI 热点的方法hotspot via create_ap]]</span><br> 4）HDMI 测试4） HDMI test<br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_HDMI_.E6.98.BE.E7.A4.BA.E6.B5.8B.E8.AF.95 HDMI 显示测试display test | HDMI display test]]</span><br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_HDMI_.E8.BD.AC_VGA_.E6.98.BE.E7.A4.BA.E6.B5.8B.E8.AF.95 HDMI 转 to VGA display test | HDMI to VGA 显示测试display test]]</span><br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_HDMI_.E5.88.86.E8.BE.A8.E7.8E.87.E8.AE.BE.E7.BD.AE.E6.96.B9.E6.B3.95 HDMI 分辨率设置方法resolution setting method | HDMI resolution setting method]]</span><br> 5）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E8.93.9D.E7.89.99.E4.BD.BF.E7.94.A8.E6.96.B9.E6.B3.95 蓝牙使用方法How to use Bluetooth | How to use Bluetooth]]</span> <br>6）USB 接口测试 6） USB interface test<br>查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_.E8.BF.9E.E6.8E.A5_USB_.E9.BC.A0.E6.A0.87.E6.88.96.E9.94.AE.E7.9B.98.E6.B5.8B.E8.AF.95 连接 Connect USB mouse or keyboard to test | Connect USB 鼠标或键盘测试mouse or keyboard to test]]</span><br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_.E8.BF.9E.E6.8E.A5_USB_.E5.AD.98.E5.82.A8.E8.AE.BE.E5.A4.87.E6.B5.8B.E8.AF.95 连接 Connect USB storage device test | Connect USB 存储设备测试storage device test]]</span><br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_USB_.E6.97.A0.E7.BA.BF.E7.BD.91.E5.8D.A1.E6.B5.8B.E8.AF.95 USB 无线网卡测试wireless network card test | USB wireless network card test]]</span><br>查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_USB_.E6.91.84.E5.83.8F.E5.A4.B4.E6.B5.8B.E8.AF.95 USB 摄像头测试camera test | USB camera test]]</span><br>7）音频测试7） Audio Test<br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_.E5.9C.A8.E6.A1.8C.E9.9D.A2.E7.B3.BB.E7.BB.9F.E4.B8.AD.E6.B5.8B.E8.AF.95.E9.9F.B3.E9.A2.91.E6.96.B9.E6.B3.95 在桌面系统中测试音频方法Testing audio methods on desktop systems | Testing audio methods on desktop systems]]</span><br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_.E4.BD.BF.E7.94.A8.E5.91.BD.E4.BB.A4.E6.92.AD.E6.94.BE.E9.9F.B3.E9.A2.91.E7.9A.84.E6.96.B9.E6.B3.95 使用命令播放音频的方法The method of using commands to play audio | The method of using commands to play audio]]</span><br> 查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#.E6.9F.A5.E8.AF.A2_.E4.BD.BF.E7.94.A8.E5.91.BD.E4.BB.A4.E6.B5.8B.E8.AF.95.E5.BD.95.E9.9F.B3.E7.9A.84.E6.96.B9.E6.B3.95 使用命令测试录音的方法Method of using commands to test recording | Method of using commands to test recording]]</span><br> 8）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#26_Pin_.E6.8E.A5.E5.8F.A3.E5.BC.95.E8.84.9A.E8.AF.B4.E6.98.8E 26 Pin 接口引脚说明Interface Pin Description | 26 Pin Interface Pin Description]]</span> <br>关于Linux系统使用说明更详细的资料，你可以在For more detailed information on Linux system instructions, you can check <span style="color:#0066CC;">[http://www.orangepi.cnorg/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi 5用户手册5 user manual.]</span>中查阅。<br><br>

=== Instructions for the use of the Android 12 系统的使用说明 system ===1）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#.E5.B7.B2.E6.94.AF.E6.8C.81.E7.9A.84_Android_.E7.89.88.E6.9C.AC 已支持的 Android 版本]</span><br>2）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detailOrange Pi 5 detail#Android_.E5.8A.9F.E8.83.BD.E9.80.82.E9.85.8D.E6.83.85.E5.86.B5 功能适配情况How to use the wireless network card | How to use the wireless network card]</span><br>3）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#USB_.E6.97.A0.E7.BA.BF.E7.BD.91.E5.8D.A1.E7.9A.84.E4.BD.BF.E7.94.A8.E6.96.B9.E6.B3.95 USB 无线网卡的使用方法]</span><br>4）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#AP6275P_PCIe_.E7.BD.91.E5.8D.A1.E7.9A.84.E4.BD.BF.E7.94.A8.E6.96.B9.E6.B3.95 AP6275P PCIe 网卡的使用方法]</span>2） 26Pin interface GPIO, UART, SPI and PWM test<br> 5）Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#WIFI_.E7.9A.84.E8.BF.9E.E6.8E.A5.E6.B5.8B.E8.AF.95.E6.96.B9.E6.B3.95 WIFI 的连接测试方法]</span> <br>6）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detailOrange Pi 5 detail#Wi-Fi_hospot_.E7.9A.84.E4.BD.BF.E7.94.A8.E6.96.B9.E6.B3.95 Wi-Fi hospot 的使用方法26pin GPIO port test | 26pin GPIO port test]</span><br>7）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#.E8.93.9D.E7.89.99.E7.9A.84.E6.B5.8B.E8.AF.95.E6.96.B9.E6.B3.95 蓝牙的测试方法]</span><br> 8）Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#10.1_.E5.AF.B8_MIPI_.E5.B1.8F.E5.B9.95.E7.9A.84.E4.BD.BF.E7.94.A8.E6.96.B9.E6.B3.95 10.1 寸MIPI 屏幕的使用方法]</span><br> 9）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#OV13850_.E5.92.8C_OV13855_MIPI_.E6.91.84.E5.83.8F.E5.A4.B4.E7.9A.84.E6.B5.8B.E8.AF.95.E6.96.B9.E6.B3.95 OV13850 和OV13855 MIPI 摄像头的测试方法]</span><br> 10）26pin 接口 GPIO、UART、SPI 和 PWM 测试<br> 查询 <span style="color:Orange Pi 5 detail#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#26pin_GPIO_.E5.8F.A3.E6.B5.8B.E8.AF.95 26pin GPIO 口测试]</span> <br>查询 <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#26pin_.E7.9A.84_UART_.E6.B5.8B.E8.AF.95 UART test | 26pin 的 UART 测试test]]</span><br>查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail[Orange Pi 5 detail#26pin_.E7.9A.84_SPI_.E6.B5.8B.E8.AF.95 26pin 的 SPI 测试]</span> <br>查询 <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#26pin_.E7.9A.84_PWM_.E6.B5.8B.E8.AF.95 's PWM test | 26pin 的 's PWM 测试test]</span><br> 11）ADB的使用方法<br>查询 <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#.E4.BD.BF.E7.94.A8.E6.95.B0.E6.8D.AE.E7.BA.BF.E8.BF.9E.E6.8E.A5_adb_.E8.B0.83.E8.AF.95 使用数据线连接 adb 调试]</span><br>查询 Check <span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#.E4.BD.BF.E7.94.A8.E7.BD.91.E7.BB.9C.E8.BF.9E.E6.8E.A5_adb_.E8.B0.83.E8.AF.95 使用网络连接 adb 调试]</span><br>12）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detailOrange Pi 5 detail#Android_Box_.E6.B5.8B.E8.AF.95.E8.BF.87.E7.9A.84_2.4G_USB_.E9.81.A5.E6.8E.A7.E5.99.A8 Android Box 测试过的2.4G USB 遥控器26pin's SPI test | 26pin's SPI test]</span><br>13）<span style="color:#0066CC;">[http://www.orangepi.cn/orangepiwiki/index.php/Orange_Pi_5_detail#Android_Box_.E7.B3.BB.E7.BB.9F_HDMI_CEC_.E5.8A.9F.E8.83.BD.E7.9A.84.E4.BD.BF.E7.94.A8.E6.96.B9.E6.B3.95 系统HDMI CEC 功能的使用方法]</span><br><br>你也可以在You can also consult the following in <span style="color:#0066CC;">[http://www.orangepi.cnorg/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html the Orange Pi 5用户手册5 user manual:]</span>中查阅：<br>* Ubuntu22.04 Gnome Wayland 桌面系统使用说明* Linux SDK——orangepi-build 使用说明* Linux 开发手册instructions for use* The compilation method of the Android 12 源码的编译方法source code