Pi Plus 2e initializing SDRAM Fail

Sartor

Hello members, I have recently bought Orange Pi Plus 2e from aliexpress. I have followed all instructions for burning different OS images on different microSD cards. But I can't launch my board. No leds are lighting and no other signs of live. Power adapter is original (5V, 3A)? real voltage is 5.36V. I connected UART adapter and received this dump:

1. HELLO! BOOT0 is starting!
   
2. boot0 version : 4.2.0
   
3. boot0 commit : c8c201b51b7ea1baa94590a1887313124d9a5879
   
4. fel_flag = 0x00000000
   
5. rtc[0] value = 0x00000000
   
6. rtc[1] value = 0x00000000
   
7. rtc[2] value = 0x00000000
   
8. rtc[3] value = 0x00000000
   
9. rtc[4] value = 0x00000000
   
10. rtc[5] value = 0x00000000
    
11. rtc[6] value = 0x00000000
    
12. rtc[7] value = 0x00000000
    
13. DRAM DRIVE INFO: V1.4
    
14. the chip id is 0x00000081
    
15. the chip id is 0x00000081
    
16. the chip id is 0x00000081
    
17. the chip id is 0x00000081
    
18. the chip id is 0x00000081
    
19. NOT GATE MODE
    
20. READ DQS LCDL = 001e1e1e
    
21. initializing SDRAM Fail.

Copy code

Can you help me?

igorpec

What about from nighty section?

https://www.armbian.com/orange-pi-plus-2e/

Sartor

I have burned Armbian (nightly). This is boot dump:

1. U-Boot SPL 2016.11-armbian (Dec 15 2016 - 11:55:30)
   
2. DRAM: 0 MiB
   
3. ### ERROR ### Please RESET the board ###

Copy code

Sartor

No other variants?

igorpec

https://www.armbian.com/search_gcse/

Search for: ### ERROR ### Please RESET the board ### for more info and possible workarounds.