Installing CSI Camera

Shivani · Published in 2017-9-8 14:56:25

I have Orange Pi PC plus which has Debian OS and I want to start CSI camera.Please guide me for that. Do I need to install ow level drivers or not? Is it similar to Raspberry Pi or not?

admin · Published in 2017-9-8 16:46:52

Here is what wrote in the user manual:

i　Load up driver

sudo modprobe gc2035

sudo modprobe vfe_v4l2

ii　Install motion

sudo apt-get install motion

iii　Modify configuration

sudo nano /etc/motion/motion.conf

stream_localhost off

iv　Create folder for images saving

mkdir ~/motion

v　Modify permission

chmod 777 motion

vi　Continue modifying configuration

sudo nano /etc/default/motion

start_motion_daemon=yes

vii　Boot the server

Sudo /etc/init.d/motion start

Enter the following in browser: localhost:8081

You could check image output from camera.

Besides, you could also refer to this link:

http://www.cnx-software.com/2015/09/26/how-to-use-orange-pi-camera-in-linux-with-motion/

Shivani · Published in 2017-9-8 17:18:18

admin replied at 2017-9-8 16:46
Here is what wrote in the user manual:
i　Load up driversudo modprobe gc2035sudo modprobe vfe_v4l2ii ...

Thank You ! I have referred user manual. In that at the end of page 30 there is "8) How to use gc2035 on Linux " written so do I need to execute those command before loading sudo modprobe gc2035sudo modprobe vfe_v4l?

Shivani · Published in 2017-9-8 17:19:17

How can I know that my camera is detected ?

ledfreak3d · Published in 2018-1-4 02:15:54

very good question seems csi cams are not working on latest armbian and ubuntu

igorpec · Published in 2018-1-4 05:26:46

https://forum.armbian.com/topic/ ... t&comment=46641

emmaorabelle · Published in 4 daybefore

Poor Bunny is perfect for short gaming sessions, but it’s also dangerously easy to say “just one more run.” Each attempt feels different, and the desire to beat your previous score keeps pulling you back in.