Openelec Build for OPI PC and 2 now with HW decoding

andrejb · Published in 2016-3-17 02:38:41

cat /etc/release
H3.OPiPC.arm-devel-20160316180934-r22216-gf5dad3a

cpu temp
cat /sys/devices/virtual/thermal/thermal_zone1/temp
72

then i did the revert
git revert 80fd33d8da7f5016edf655a7f5101ad6af5ebc65
and build
PROJECT=H3 DEVICE=OPiPC ARCH=arm make image

put SYSTEM* and KERNEL* in update and reboot

cat /etc/release
H3.OPiPC.arm-devel-20160316191638-r22219-g7b21fec

cpu temp
cat /sys/devices/virtual/thermal/thermal_zone1/temp
70

and this is strange.. still at 70°C even with the revert

slaine · Published in 2016-3-17 16:55:04

Edited by slaine at 2016-3-17 20:52

jernej replied at 2016-3-17 01:11
Do you have any sample video (e.g. few megs) to demonstrate this? After more testing, I can say th ...

Could it be due to refresh rate? I did same other tests and on image 2016/02/03 video plays smoother I thing, but there is fix 60 Hz RR, tested video has 23,976.

jernej · Published in 2016-3-18 01:05:53

slaine replied at 2016-3-17 09:55
Could it be due to refresh rate? I did same other tests and on image 2016/02/03 video plays smoothe ...

You can test this by changing refresh rate in video settings. Be aware that you can select only between refresh rates which are supported in both devices, OPi and display.

jernej · Published in 2016-3-18 01:10:22

andrejb replied at 2016-3-16 19:38
cat /etc/release
H3.OPiPC.arm-devel-20160316180934-r22216-gf5dad3a

Which commit is that? I could find it in my git.

andrejb · Published in 2016-3-18 20:18:04

jernej replied at 2016-3-18 01:10
Which commit is that? I could find it in my git.

I compiled overnight the last master

cat /etc/release
H3.OPiPC.arm-devel-20160317224315-r1-g9060759

slaine · Published in 2016-3-18 20:47:04

jernej replied at 2016-3-18 01:05
You can test this by changing refresh rate in video settings. Be aware that you can select only be ...

I know, but in image from 03.02.16 I cannot change this setting, there is fixed 60 Hz and adjust display RR does not work.

chaszim · Published in 2016-3-19 05:09:09

Edited by chaszim at 2016-3-19 06:17

I know your probably already aware of it, but, this issue seems to reoccur with Kodi on a fairly regular basis. LibRTMP apparently may need to be updated again, or soon, to assist in streaming video sources. And, here's a link to help http://kodi.wiki/view/HOW-TO:Update_librtmp

stillka · Published in 2016-3-19 21:42:44

Hi, where we can download latest build img?

chaszim · Published in 2016-3-20 08:08:41

stillka replied at 2016-3-19 21:42
Hi, where we can download latest build img?

http://www.orangepi.org/orangepi ... 1075&extra=page%3D1

This page takes you to the mega site where all working versions land.

rapalat · Published in 2016-3-21 08:25:47

While using the latest build, I am getting a small stutter every few minutes. While decoding very movement-intense video it gets even worse..I know I shouldn't expect perfect video playback on a 13$ device, but curious if anyone is still working on this ?