Linux Distributions for Orange PI H3 boards

goskum

Hi all, this is my first post in the forum.
I have OPI PC and debian jessie minimal installed. Everything works fine except wifi dongles. I have another problem, when configure a external ntfs hdd in fstab, if boot the system without the drive attached, the system boot in safe mode. How can i solve it? sometimes I need to start without any connected disk. Thanks

loboris

goskum replied at 2015-10-26 19:05
Hi all, this is my first post in the forum.
I have OPI PC and debian jessie minimal installed. Every ...

Do not configure a external ntfs hdd in fstab, or try to use nofail and nobootwait options.
If you dont need the drive at boot time put the mount command in /etc/rc.local.

Fabrixio1

loboris replied at 2015-10-25 04:28
Gentoo Linux uploaded to Mega

Could you add Slackware?
Thanks...

tomczyck

I have wierd problem kswapd0 process. While I'm using usb disk (through samba) kswapd process using almost 100% of cpu.
I've read on internet it's old kernel problem. Could you prepare uImage with some newer kernel than 3.49 please?

stone

...add some swap space and then set it to be used only when absolutely needed: http://effluviaofascatteredmind. ... buntu-1404-faq.html

goskum

loboris replied at 2015-10-27 02:12
Do not configure a external ntfs hdd in fstab, or try to use nofail and nobootwait options.
If you  ...

Thanks loboris, nofail and nobootwait works fine. By the way, is it there an option to disable automatic run of graphical interface?. I installed lxde trought desktop scripts.

loboris

goskum replied at 2015-10-27 14:08
Thanks loboris, nofail and nobootwait works fine. By the way, is it there an option to disable aut ...

xserver is not started until you login to lxde. What you see is only LightDM graphical login screen which uses almost no resources.
You can disable LightDM start at boot.
You can switch to console (Ctrl+Alt+F1), login and use htop to see the running processes.

goskum

loboris replied at 2015-10-27 23:33
xserver is not started until you login to lxde. What you see is only LightDM graphical login scree ...

I use this commands and works fine:

sudo systemctl enable multi-user.target --force
sudo systemctl set-default multi-user.target

To enable again:

sudo systemctl disable multi-user.target --force

Wifi it's working with new "scriptbin_kernel.tar.gz", (Ralink Technology, Corp. RT5370 Wireless Adapter).

I try to update kernel with "update_kernel.sh" script, it returns an script error:

CONTINUE, (y/N)?  y

ERROR: config file "/boot/script.bin.{_script}_72p60_hdmi" not found.

kernel, script.bin and /lib/modules updated, please REBOOT.
===========================================================

toxuin

goskum replied at 2015-10-27 12:06
I use this commands and works fine:

sudo systemctl enable multi-user.target --force

I can confirm that. I had to manually copy the script and uBoot files after the script finished it's job. There were not script.bin and uBoot files in /boot/, just a lot of device_and_resolution_specific.bin files.

goskum

Is there any specific tool for monitor CPU temperature?