[SOLVED] How to burn sd

jernej · Published in 2016-9-20 05:30:32

Ok, mmcblk1 should be there. Please provide script.bin from FAT partition and full output of dmesg.

campioncino · Published in 2016-9-20 05:51:26

It's a very long output...
i put in a dropbox folder because i can't paste here and i can't upload as a txt file https://www.dropbox.com/sh/g2as827qqth2xwd/AAB1kuF4-dJAvwvkaMLlEmusa?dl=0

campioncino · Published in 2016-9-20 05:53:09

this is the final part of dmesg

38.979043] VBoxNetFlt: Successfully started.
[ 38.983037] VBoxNetAdp: Successfully started.
[ 38.987500] VBoxPciLinuxInit
[ 38.990157] vboxpci: IOMMU not found (not registered)
[ 40.421553] vgaarb: this pci device is not a vga device
[ 40.432079] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 40.432109] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 40.432123] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 40.432137] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 40.432150] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 40.432187] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 40.432200] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 40.432749] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 40.550720] nvidia-modeset: Allocated GPU:0 (GPU-1aeee2d3-3dd4-02c7-4391-d8f1ccf35684) @ PCI:0000:0a:00.0
[ 40.550817] nvidia-modeset: Freed GPU:0 (GPU-1aeee2d3-3dd4-02c7-4391-d8f1ccf35684) @ PCI:0000:0a:00.0
[ 41.196778] vgaarb: this pci device is not a vga device
[ 2271.943189] mmcblk0: timed out sending r/w cmd command, card status 0x900
[ 2272.256958] mmc0: tried to reset card
[ 2282.256476] mmcblk0: timed out sending r/w cmd command, card status 0x900
[ 2282.256484] blk_update_request: I/O error, dev mmcblk0, sector 63520
[ 2354.423644] mmc0: card 1234 removed
[ 2632.634081] mmc0: new high speed SDHC card at address f0fa
[ 2632.634341] mmcblk0: mmc0:f0fa SU04G 3.69 GiB
[ 2632.638499] mmcblk0: p1
[ 2972.300282] sr 1:0:0:0: [sr0] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2972.300288] sr 1:0:0:0: [sr0] tag#17 Sense Key : Illegal Request [current]
[ 2972.300292] sr 1:0:0:0: [sr0] tag#17 Add. Sense: Illegal mode for this track
[ 2972.300296] sr 1:0:0:0: [sr0] tag#17 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
[ 2972.300299] blk_update_request: I/O error, dev sr0, sector 0
[ 2972.308434] sr 1:0:0:0: [sr0] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2972.308439] sr 1:0:0:0: [sr0] tag#18 Sense Key : Illegal Request [current]
[ 2972.308442] sr 1:0:0:0: [sr0] tag#18 Add. Sense: Illegal mode for this track
[ 2972.308444] sr 1:0:0:0: [sr0] tag#18 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
[ 2972.308446] blk_update_request: I/O error, dev sr0, sector 0
[ 2972.308449] Buffer I/O error on dev sr0, logical block 0, async page read
[ 3902.468082] mmc0: card f0fa removed
[ 3915.949687] mmc0: new high speed SDHC card at address f0fa
[ 3915.949890] mmcblk0: mmc0:f0fa SU04G 3.69 GiB
[ 3915.954111] mmcblk0: p1
[ 4886.447720] mmc0: card f0fa removed
[ 4888.821808] mmc0: new high speed SDHC card at address f0fa
[ 4888.823261] mmcblk0: mmc0:f0fa SU04G 3.69 GiB
[ 4888.828635] mmcblk0: p1 p2
[ 4889.312155] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4894.867745] mmc0: card f0fa removed
[ 4894.867829] JBD2: Error -5 detected when updating journal superblock for mmcblk0p2-8.
[ 4894.867833] Aborting journal on device mmcblk0p2-8.
[ 4894.867837] JBD2: Error -5 detected when updating journal superblock for mmcblk0p2-8.
[ 4894.895768] EXT4-fs error (device mmcblk0p2): ext4_put_super:813: Couldn't clean up the journal
[ 4894.895774] EXT4-fs (mmcblk0p2): Remounting filesystem read-only
[ 4894.895777] EXT4-fs (mmcblk0p2): previous I/O error to superblock detected
[ 4894.919731] FAT-fs (mmcblk0p1): unable to read boot sector to mark fs as dirty
[ 5203.183272] vgaarb: this pci device is not a vga device
[ 5568.501236] wlo1: Connection to AP f0:84:2f:36:10:74 lost
[ 5568.622840] cfg80211: World regulatory domain updated:
[ 5568.622844] cfg80211: DFS Master region: unset
[ 5568.622846] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5568.622849] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5568.622851] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5568.622852] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 5568.622855] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 5568.622857] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 5568.622859] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 5568.622861] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 5568.622863] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 5584.337416] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5585.379037] wlo1: authenticate with 00:1b:2f:55:ce:9a
[ 5585.398904] wlo1: send auth to 00:1b:2f:55:ce:9a (try 1/3)
[ 5585.400367] wlo1: authenticated
[ 5585.400511] rtl8188ee 0000:08:00.0 wlo1: disabling HT as WMM/QoS is not supported by the AP
[ 5585.400515] rtl8188ee 0000:08:00.0 wlo1: disabling VHT as WMM/QoS is not supported by the AP
[ 5585.402751] wlo1: associate with 00:1b:2f:55:ce:9a (try 1/3)
[ 5585.405403] wlo1: RX AssocResp from 00:1b:2f:55:ce:9a (capab=0x431 status=0 aid=5)
[ 5585.406063] wlo1: associated
[ 5585.406074] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 5893.501977] vgaarb: this pci device is not a vga device
[ 5909.139884] vgaarb: this pci device is not a vga device
[10832.717702] vgaarb: this pci device is not a vga device
[12133.849892] mmc0: new high speed SDHC card at address f0fa
[12133.851584] mmcblk0: mmc0:f0fa SU04G 3.69 GiB
[12133.856018] mmcblk0: p1 p2
[12134.478426] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[12907.139001] mmc0: card f0fa removed
[12907.170831] JBD2: Error -5 detected when updating journal superblock for mmcblk0p2-8.
[12907.170836] Aborting journal on device mmcblk0p2-8.
[12907.170839] JBD2: Error -5 detected when updating journal superblock for mmcblk0p2-8.
[13765.636114] perf interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[13800.236432] FAT-fs (mmcblk0p1): unable to read boot sector to mark fs as dirty
[13914.503464] mmc0: new high speed SDHC card at address f0fa
[13914.504981] mmcblk0: mmc0:f0fa SU04G 3.69 GiB
[13914.509846] mmcblk0: p1 p2
[13915.133347] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[14625.123270] vgaarb: this pci device is not a vga device
[14711.989020] vgaarb: this pci device is not a vga device
[14989.607391] mmc0: card f0fa removed
[14996.540577] mmc0: new high speed SDHC card at address f0fa
[14996.542530] mmcblk0: mmc0:f0fa SU04G 3.69 GiB
[14996.546898] mmcblk0: p1
[15535.658714] vgaarb: this pci device is not a vga device
[15591.300928] vgaarb: this pci device is not a vga device
[16079.191447] vgaarb: this pci device is not a vga device
[16707.439630] vgaarb: this pci device is not a vga device
[16741.231590] mmc0: card f0fa removed
[16741.275277] FAT-fs (mmcblk0p1): unable to read boot sector to mark fs as dirty
[16743.997618] mmc0: new high speed SDHC card at address f0fa
[16743.997990] mmcblk0: mmc0:f0fa SU04G 3.69 GiB
[16744.003996] mmcblk0: p1 p2
[16744.483183] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[16744.509672] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[16751.004073] mmc0: card f0fa removed
[16751.039605] JBD2: Error -5 detected when updating journal superblock for mmcblk0p2-8.
[16751.039611] Aborting journal on device mmcblk0p2-8.
[16751.039615] JBD2: Error -5 detected when updating journal superblock for mmcblk0p2-8.
[18198.532925] mmc0: new high speed SDHC card at address f0fa
[18198.534458] mmcblk0: mmc0:f0fa SU04G 3.69 GiB
[18198.539298] mmcblk0: p1 p2
[18199.395866] EXT4-fs (mmcblk0p2): recovery complete
[18199.399563] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

Copy code

campioncino · Published in 2016-9-20 05:54:41

Edited by campioncino at 2016-9-20 06:16

It could be due to my sd?

FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Copy code

jernej · Published in 2016-9-20 12:49:41

campioncino replied at 2016-9-19 22:51
It's a very long output...
i put in a dropbox folder because i can't paste here and i can't upload ...

dmesg is from your host computer, not from OPi. script.bin is also text file... Copy it from SD card.

BTW, larger texts should always be attachments or uploaded to pastebin or something else.

campioncino · Published in 2016-9-21 23:36:56

I solved it.
I downloaded again your source from github, and make a new .img file.
Now it seem to be ok.
Also emmc installing process.