H3 boards with Allwiner source code

magicse

phelum replied at 2015-8-2 08:05
Hi,

I assume you're trying to compile u-boot.  I hit the same problem with the missing directorie ...

Yes you are right.. The error due to missed directories. Thank you for helping.

magicse

Some question
In docs of Orange Pi say next ->
SD Card Layout
SD Card Layout
start         size         usage
0         8KB         Unused, available for partition table etc.
8         24KB         Initial SPL loader
32         512KB         u-boot
544         128KB         environment
672         352KB         reserved
1024         -         Free for partitions
Why Steven  use command:
  sudo dd if=u-boot-sun8iw7p1.bin of=/dev/sdb bs=1024 seek=16400 (http://www.orangepi.org/orangepi ... ra=&ordertype=1)
and not

  sudo dd if=u-boot-sun8iw7p1.bin of=/dev/sdb bs=1024 seek=8
or
  sudo dd if=u-boot-sun8iw7p1.bin of=/dev/sdb bs=1024 seek=32

loboris

magicse replied at 2015-8-3 07:56
Some question
In docs of Orange Pi say next ->
SD Card Layout

Because that sd card layout is wrong.
bootloader is at 8x1024
u-boot is at 16400*1024
first partition starts at 20480x1024

ghl.bhrt

zhao_steven replied at 2015-5-3 09:20
I will upload u-boot and kernel source to github orangepi-xunlong in a week. I am testing lubuntu an ...

Can you share github path for u-boot bootloader.

If possible, Can you share boot0 code. similar to this-https://github.com/allwinner-zh/ ... master/basic_loader
I am working on my custom hypervisor(Type1) so all low level detail require for same.

Thanks for co-operations.

Regards,
Bharat Gohil

fritz

@ghl.bhrt

zhao_steven replied at 2015-5-3 09:20
I will upload u-boot and kernel source to github orangepi-xunlong in a week. I am testing lubuntu an

Steven forgot to say in a week next year!

don't believe it!

This is the official link:  https://github.com/allwinner-zh/ ... master/basic_loader
There are no others!

magicse

loboris replied at 2015-8-3 09:58
Because that sd card layout is wrong.
bootloader is at 8x1024
u-boot is at 16400*1024

Thanks for reply
I thought so, but I doubted.

fabrixio

Hi.

Device: http://www.cnx-software.com/2015 ... e-and-sdk-released/
Im using SDK :http://www.orangepi.org/plusdown ... urce_code_plus.html
Patch: http://linux-sunxi.org/Cubietruck/AP6210

The path is because the wirelees is a broadcom, not realteck

I get this error for modules, Can you help me? Or There is a kernel with the driver AP62xx ready ?

  Kernel: arch/arm/boot/Image is ready
  GZIP    arch/arm/boot/compressed/piggy.gzip
  CC      arch/arm/boot/compressed/misc.o
  AS      arch/arm/boot/compressed/head.o
WARNING: could not find drivers/media/video/sunxi-vfe/lib/.libisp.cmd for drivers/media/video/sunxi-vfe/lib/libisp
  CC      arch/arm/boot/compressed/decompress.o
ERROR: "gpio_write_one_pin_value" [drivers/net/wireless/ap6210/ap6210.ko] undefined!
ERROR: "gpio_request_ex" [drivers/net/wireless/ap6210/ap6210.ko] undefined!
ERROR: "gpio_read_one_pin_value" [drivers/net/wireless/ap6210/ap6210.ko] undefined!
ERROR: "sunximmc_rescan_card" [drivers/net/wireless/ap6210/ap6210.ko] undefined!
ERROR: "sw_mci_check_r1_ready" [drivers/net/wireless/ap6210/ap6210.ko] undefined!
ERROR: "script_parser_fetch" [drivers/net/wireless/ap6210/ap6210.ko] undefined!
WARNING: modpost: Found 6 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
/home/usuario/Descargas/arm/Draco_H3_SDK_20150601_lichee/linux-3.4/scripts/Makefile.modpost:91: recipe for target '__modpost' failed
make[1]: *** [__modpost] Error 1
Makefile:1096: recipe for target 'modules' failed
make: *** [modules] Error 2
make: *** Se espera a que terminen otras tareas....
  CC      arch/arm/boot/compressed/string.o
  AS      arch/arm/boot/compressed/lib1funcs.o
  AS      arch/arm/boot/compressed/ashldi3.o
  AS      arch/arm/boot/compressed/piggy.gzip.o
  LD      arch/arm/boot/compressed/vmlinux
  OBJCOPY arch/arm/boot/zImage
  Kernel: arch/arm/boot/zImage is ready
  UIMAGE  arch/arm/boot/uImage
Image Name:   Linux-3.4.39
Created:      Fri Aug 28 19:26:26 2015
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    7330352 Bytes = 7158.55 kB = 6.99 MB
Load Address: 40008000
Entry Point:  40008000
  Image arch/arm/boot/uImage is ready


regards and thanks

aali

hey all, I was simply checkin’ out this blog and I actually admire the premise of the article, and don’t have anything to do, so if anybody wish to to have an engrossing convo about it, please contact me on AIM, my name is heather smith        Mẹo chơi 3d game VIN777

aali

Excellent blog here! Also your site loads up fast! What host are you using? Can I get your affiliate link to your host? I wish my site loaded up as quickly as yours lol        a course in miracles app