rebuild U-Boot problem

fritz · Published in 2015-6-14 02:12:16

Hello again,

I fixed the problem with the USBs it was a problem in the default sys_config.fex file...........

Why default sys_config.fex file?

I have posted some time ago fexfile for opi plus and opi 2.
http://www.orangepi.org/orangepi ... &extra=page%3D1
you can download it:
https://github.com/vonfritz/sunx ... g/H3/orange_pi2.fex
Can you test it?
At least I know if it's okay because I do not own an opi 2.

ivan_ucherdjiev · Published in 2015-6-14 06:59:32

Edited by ivan_ucherdjiev at 2015-6-14 07:03

1.Why default sys_config.fex file?
I modified default sys-config.fex file, because first i didnt knew it is default, i tought it is set for OPI2 (as i said i am new at this) and when i understood, i tried to find the OPI2 sys_config file but i couldnt.

2.Can you test it?
Yes ,no problem, I will test it tomorow and give you response.

fritz · Published in 2015-6-14 13:36:48

Ok
and forgot to write if you want script.bin support :

"boot_normal=fatload mmc 0:1 0x43000000 script.bin;fatload mmc 0:1 40007800 uImage;bootm 40007800\0" \

ivan_ucherdjiev · Published in 2015-6-14 16:19:35

Edited by ivan_ucherdjiev at 2015-6-14 16:28

Hello Fritz,

I tested the opi2 fex file it works good with it, HDMI, ethernet, wifi and usbs working. I made a little change and also started UARTS on the pin header they also working with python , so evertythink i good so far.

Cheers.