Linux Distributions for Orange PI H3 boards

riodda · Published in 2015-12-28 05:40:36

How many uarts are enabled in the uboot? Many thanks for your work!

lerkom · Published in 2016-1-8 13:45:11

Thanks for all your job, dear mr. Loboris!!!

nkk · Published in 2016-1-11 04:17:29

How to connect and use Bluetooth Dongle?
I connected the USB Dongle, then in CLI:

# lsusb
Bus 007 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
...
# sudo apt-get install bluez python-gobject python-dbus
...
# hcitool dev
Devices:

Copy code

Which module is required?
Is it even possible to connect the Dongle?

nkk · Published in 2016-1-12 08:35:05

Edited by nkk at 2016-1-12 08:36

is someone installed transmission-daemon?

Bandesz · Published in 2016-1-14 18:43:46

nkk replied at 2016-1-12 08:35
is someone installed transmission-daemon?

Transmission didn't worked for me, but I have installed deluged and deluge-web. I think it is better than transmission.
Here is a step-by-step tutorial for deluged and deluge-web.: http://dev.deluge-torrent.org/wiki/UserGuide/Service/systemd
I have tested on Orange Pi Plus with Lubuntu Vivid image, and it works as expected.

Bandesz · Published in 2016-1-14 21:25:18

I have wondering about realtime kernels. Will be available for Orange Pi PC? It will be better for multimedia applications.

egorv · Published in 2016-1-17 04:49:37

Edited by egorv at 2016-1-19 01:14

Hi!
How to connect 3G/LTE Modem Huawei E3372 in Orange pi pc?
I have not found the driver.
OS: OrangePI-PC_Ubuntu_Vivid_Mate.

*********************
I installed fedora.
Problem solved.

jeevasv · Published in 2016-1-20 10:07:57

Hi Loboris,

Do you mind adding the Kernel firmware loader patch to the kernel and updating the kernel packages so that all firmware dependent drivers works in distros with updated systemd whenever you have some time.

Please see http://www.orangepi.org/orangepi ... &extra=page%3D1

wizard2015 · Published in 2016-1-20 21:41:06

barban replied at 2015-11-29 08:21
The simplest solution to solve overscan issue when using orangepi's hdmi output is by actin on you ...

Thank you. It's a generally positive infromation. Hoping at some moment we will have OPI1+ & OPI2 completely supported and having up-to-date Linux images with newest mainline u-boot.... overscan_x and overscan_y woruld be very nice, in the case when TV does not allow to manipulate it so much as required.

sgdailey · Published in 2016-1-22 12:00:40

I am running the minimal jesse image from Loboris' but I need netfilter kernel support. Can anyone point me in the right direction to build kernel modules so that I dont have to rebuild the kernel completely?

Thanks