Linux Distributions for Orange PI H3 boards

Vinion · Published in 2015-10-4 16:25:24

loboris replied at 2015-10-2 17:08
For 800x480 resolution to work, the kernel sorces must be modified to.
I have the working kernel an ...

Thank you for your reply.

I dont care sto much for the colors. I just need the display to work

jacer · Published in 2015-10-4 17:23:39

Edited by jacer at 2015-10-4 17:26

RTL8188CUS and rt3070 are not working with the firmware but rtl8188eus/etv worked with two wifi interface.

loboris · Published in 2015-10-4 19:01:56

Edited by loboris at 2015-10-4 21:12

KERNEL UPDATE (EXPERIMENTAL)
Uploaded scriptbin_kernel_test.tar.gz which contains the kernel with some new features:
mali kernel drivers (ump,mali,drm,mali_drm), 1wire, CH341 USB->Serial, cdc-acm, 800x480 support (uncomplete) ...

The kernel is not fully tested yet, please backup your old files/directories before upgrading.

To upgrade:

download scriptbin_kernel_test.tar.gz from Mega or GoogleDrive, unpack
copy uImage and script.bin for your board type to the fat partition
delete the old /lib/modules/3.4.39 directory
copy lib directory from the archive to the linux partition
run: sudo depmod -a
reboot

loboris · Published in 2015-10-4 19:05:44

@lukish, @on4top, try the new kernel

loboris · Published in 2015-10-4 19:15:51

jacer replied at 2015-10-4 10:23
RTL8188CUS and rt3070 are not working with the firmware but rtl8188eus/etv worked with two wifi inte ...

So, you can recommend to all OPI-PC users to use wifi adapter like this one.

lukish · Published in 2015-10-4 22:01:56

loboris replied at 2015-10-4 19:15
So, you can recommend to all OPI-PC users to use wifi adapter like this one.

+rt5370 100% work.

lukish · Published in 2015-10-4 22:15:16

loboris replied at 2015-10-4 19:05
@lukish, @on4top, try the new kernel

Sorry, I can test in 6 hours. Will definitely report the results. While far away I was from the Board. By the way after reboot it does not start(

jacer · Published in 2015-10-4 22:24:43

loboris replied at 2015-10-4 19:15
So, you can recommend to all OPI-PC users to use wifi adapter like this one.

Yes, I got rtl8188eus work on Lubuntu and Android also. Any idea why it has Wlan0 and Wlan1 with the same mac address?

wellwei · Published in 2015-10-4 23:24:16

loboris replied at 2015-10-4 19:15
So, you can recommend to all OPI-PC users to use wifi adapter like this one.

in China it is about 3$ include the fee of dilivery more cheaper

Survive-Pi · Published in 2015-10-4 23:31:36

loboris replied at 2015-10-4 04:05
@lukish, @on4top, try the new kernel

Thank you loboris for your detailed in depth support of the O Pi boards! Help

please. After finaly installing giant heatsink and fan I am again playing with my Orange Pi Plus. It had Lubuntu running from June but none of the emmc or gpio features etc. that you have enabled work with it.
I downloaded the latest Debian xfce image. How can I slow down the boot images so I can ask for help in an educated manner? Boot flashes past in a blur, screen goes blank, then command prompt asks for login and password. Another screen blurrs past and asks for login again...and again... Blurry video looks like GNU Linux statements and warning no warranty then "warning: setlocale: LC_ALL: cannot change locale (en_us blurrrrrrrrrrrrrrrry" then login line again.

Blurry video of boot messages looks like ...
Failed to start Create list of required static device nodes for current kernel.
????ystemctl status kmod-static-modes.service' for detail.
Failed to start Load Kernel Modules.
then some loaded stuff then some failed stuff...

I've tried 3 images. I'm doing something wrong...but what?

Thank you again.
Darren.