Linux Distributions for Orange PI H3 boards

on4top · Published in 2015-10-5 00:40:36

loboris replied at 2015-10-4 19:01
KERNEL UPDATE (EXPERIMENTAL)
Uploaded scriptbin_kernel_test.tar.gz which contains the kernel with so ...

Working great now on de  Orange Pi PC .

Tryed  Jessie & Ubuntu Mate .

My usb_cdc devices working fine !

Will tye usb wifi dongle now .. don't know what chipset i have  .. wil see if it's detected .

Thanks for the great work !!

hhrhhr · Published in 2015-10-5 02:59:01

loboris replied at 2015-10-4 19:01
KERNEL UPDATE (EXPERIMENTAL)
Uploaded scriptbin_kernel_test.tar.gz which contains the kernel with so ...

hello, i have a few questions and issues.

new archive contains u-boot_OPI-(2|PC|PLUS).fex, but scripts are use only u-boot_OPI(|-emmc).fex. whether to use the new * .fex files? or you update your build scripts?
archive contains duplicate folders firmware and lib/firmware.
сan you make an archive with clean the kernel source (without tonns of *.o and *.tmp.img)?
сurrent script exits with an error from perl if
1. ONLY_BASE="yes"
2. #...
3. #LANGUAGE="en"
4. #LANG="en_US.UTF-8"
Copy code
As a consequence, the resulting image has no running SSH.

on4top · Published in 2015-10-5 03:54:31

hhrhhr replied at 2015-10-5 02:59
hello, i have a few questions and issues.

i only used the uimage en correct script for resoltion en copy the lib dir ...

ssh works fine on jessie & ubuntu image w/o problems here ...

loboris · Published in 2015-10-5 03:58:26

hhrhhr replied at 2015-10-4 19:59
hello, i have a few questions and issues.

only the script.bin.* and uImage_* files need to be copied
thanks for noticing duplicate firmware directory, only the one in lib directory has to be used
I think the kernel sources archive kernel_3.4.9.tar.xz is clean
I don't understand your comment about "сurrent script" ...

loboris · Published in 2015-10-5 04:11:34

Survive-Pi replied at 2015-10-4 16:31
Thank you loboris for your detailed in depth support of the O Pi boards! Help please. After fin ...

I don't quite understand your problem.
If you installed Debian xfce image (according to the instructions), the booting process should end with graphical login screen.
Text messages during boot are normal, it is the part of the kernel loading.
You can get the same messages with dmesg command in terminal, use dmesg > message_file.txt to output it to the file so you can analize it.
There is no need to use giant heatsink (unless you realy want it), the fan alone is more than enough.

Orangepi2mini · Published in 2015-10-5 04:18:09

scriptbin_kernel_test.tar.gz 1wire doesn' t work

loboris · Published in 2015-10-5 04:32:23

Orangepi2mini replied at 2015-10-4 21:18
scriptbin_kernel_test.tar.gz 1wire doesn' t work

I know, that's why it is test kernel...

on4top · Published in 2015-10-5 05:35:36

Edited by on4top at 2015-10-5 06:21

Tested 2 usb wifi dongle i had .. no succes ..

1 dongle on windows = RTL8192EU .1 dongle on windows = RTL8191SU.

root@OrangePI:/var/log# lsusb
Bus 008 Device 002: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 04f2:0603 Chicony Electronics Co., Ltd
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 005: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter
Bus 003 Device 006: ID 0bda:818b Realtek Semiconductor Corp.
Bus 003 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root@OrangePI:/var/log# tail kern.log
Oct  4 21:17:13 localhost vmunix: [ 1732.310706] ehci_irq: highspeed device disconnect
Oct  4 21:17:13 localhost vmunix: [ 1732.460351] usb 3-1: USB disconnect, device number 2
Oct  4 21:17:19 localhost vmunix: [ 1738.834796] ehci_irq: highspeed device connect
Oct  4 21:17:19 localhost vmunix: [ 1738.910481] ehci_irq: highspeed device disconnect
Oct  4 21:17:34 localhost vmunix: [ 1753.546631] ehci_irq: highspeed device connect
Oct  4 21:17:34 localhost vmunix: [ 1753.810133] usb 3-1: new high-speed USB device number 4 using sunxi-ehci
Oct  4 21:17:34 localhost vmunix: [ 1753.963703] hub 3-1:1.0: USB hub found
Oct  4 21:17:34 localhost vmunix: [ 1753.964172] hub 3-1:1.0: 4 ports detected
Oct  4 21:20:54 localhost vmunix: [ 1953.420553] usb 3-1.3: new high-speed USB device number 5 using sunxi-ehci
Oct  4 21:21:07 localhost vmunix: [ 1966.150488] usb 3-1.1: new high-speed USB device number 6 using sunxi-ehci
root@OrangePI:/var/log#

tryed all modules .. but none seems to work

root@OrangePI:/lib/modules/3.4.39/kernel/drivers/net/wireless# ls -all
total 32
drwxr-xr-x 8 root root 4096 Oct  4 14:21 .
drwxr-xr-x 4 root root 4096 Oct  4 14:21 ..
drwxr-xr-x 2 root root 4096 Oct  4 14:21 bcmdhd
drwxr-xr-x 2 root root 4096 Oct  4 14:21 rt2x00
drwxr-xr-x 2 root root 4096 Oct  4 14:21 rtl8188eu
drwxr-xr-x 2 root root 4096 Oct  4 14:21 rtl8189es
drwxr-xr-x 2 root root 4096 Oct  4 14:21 rtl8723bs
drwxr-xr-x 4 root root 4096 Oct  4 14:21 rtlwifi

hhrhhr · Published in 2015-10-5 06:00:11

Edited by hhrhhr at 2015-10-5 06:02

on4top replied at 2015-10-5 03:54
ssh works fine on jessie & ubuntu image w/o problems here ...

it can not be. code from second-stage:

if [ "${ONLY_BASE}" = "yes" ] ; then
echo "Installing base packages..."
apt-get ${_apt} install sudo isc-dhcp-client netbase ifupdown iproute network-manager --no-install-recommends >> $_LOGFILE 2>&1 &

Copy code

if specified ONLY_BASE = "yes", then no install openssh happens.

on4top · Published in 2015-10-5 06:05:45

Found another USB Wifi Dongle .. Succes !

root@OrangePI:~# lsusb
Bus 008 Device 002: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation                                                                                           Demo
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 04f2:0603 Chicony Electronics Co., Ltd
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless                                                                                           Adapter
Bus 003 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OrangePI:~#

Oct  4 21:57:08 localhost vmunix: [ 4127.150082] usb 3-1: new high-speed USB device number 9 using sunxi-ehci
Oct  4 21:57:08 localhost vmunix: [ 4127.303032] hub 3-1:1.0: USB hub found
Oct  4 21:57:08 localhost vmunix: [ 4127.303400] hub 3-1:1.0: 4 ports detected
Oct  4 21:57:08 localhost vmunix: [ 4127.580600] usb 3-1.2: new high-speed USB device number 10 using sunxi-ehci
Oct  4 21:57:08 localhost vmunix: [ 4127.800507] usb 3-1.2: reset high-speed USB device number 10 using sunxi-ehci
Oct  4 21:57:08 localhost vmunix: [ 4127.937535] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Oct  4 21:57:08 localhost vmunix: [ 4127.938754] Registered led device: rt2800usb-phy1::radio
Oct  4 21:57:08 localhost vmunix: [ 4127.938895] Registered led device: rt2800usb-phy1::assoc
Oct  4 21:57:08 localhost vmunix: [ 4127.939026] Registered led device: rt2800usb-phy1::quality
Oct  4 21:57:09 localhost vmunix: [ 4128.498129] ADDRCONF(NETDEV_UP): wlan1: link is not ready
Oct  4 21:57:11 localhost vmunix: [ 4130.784668] wlan1: authenticate with 2e:a4:3c:7d:d0:ac
Oct  4 21:57:11 localhost vmunix: [ 4130.855290] wlan1: send auth to 2e:a4:3c:7d:d0:ac (try 1/3)
Oct  4 21:57:11 localhost vmunix: [ 4130.858184] wlan1: authenticated
Oct  4 21:57:11 localhost vmunix: [ 4130.930114] wlan1: associate with 2e:a4:3c:7d:d0:ac (try 1/3)
Oct  4 21:57:11 localhost vmunix: [ 4130.935839] wlan1: RX AssocResp from 2e:a4:3c:7d:d0:ac (capab=0x431 status=0 aid=3)
Oct  4 21:57:12 localhost vmunix: [ 4131.007529] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Oct  4 21:57:12 localhost vmunix: [ 4131.007757] wlan1: associated
Oct  4 21:57:45 localhost vmunix: [ 4164.530294] PHY: gmac0-0:00 - Lin

root@OrangePI:/var/log# ifconfig
eth0    Link encap:Ethernet  HWaddr e2:95:3a:d6:56:75
      UP BROADCAST MULTICAST  MTU:1500  Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:0 (0.0 B)  TX bytes:510 (510.0 B)
      Interrupt:114

lo       Link encap

ocal Loopback
      inet addr:127.0.0.1  Mask:255.0.0.0
      inet6 addr: ::1/128 Scope:Host
      UP LOOPBACK RUNNING  MTU:16436  Metric:1
      RX packets:19022 errors:0 dropped:0 overruns:0 frame:0
      TX packets:19022 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:0
      RX bytes:49419500 (47.1 MiB)  TX bytes:49419500 (47.1 MiB)

wlan1    Link encap:Ethernet  HWaddr 00:1f:1f:59:e9:7e
      inet addr:10.98.239.84  Bcast:10.98.239.255  Mask:255.255.255.0
      inet6 addr: fe80::21f:1fff:fe59:e97e/64 Scope

ink
      UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
      RX packets:6169 errors:0 dropped:0 overruns:0 frame:0
      TX packets:6838 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:1133686 (1.0 MiB)  TX bytes:6588118 (6.2 MiB)