Orange Pi 3 - support for Z-Wave.Me UZB1 USB / Open Zvawe

czosnekltd · Published in 2019-3-13 03:53:29

Hello all
Recently, I have been in possession of Orange Pi 3 - bought with the intention of installing Domoticz on it.
I installed Ubuntu and Debian (debian even updated to version 18) but in both cases the system does not detect
Z-Wave.Me UZB1 USB Controller.
According to the manufacturer's instructions, Lunux has a built-in the stick driver and the device / dev / ttyACM0 should be seen in the system.
Unfortunately, this situation does not occur for both systems.
I would like to add that on the RPI or Windows 10 the USB stick is correctly detected - which excludes possible equipment failure.

Is it planned to enable USB OpenZwawe support in Ubuntu / Debian on Orange Pi3?

igorpec · Published in 2019-3-13 06:05:32

Edited by igorpec at 2019-3-12 23:10

This (will) work(s) on Armbian OOB when released. https://forum.armbian.com/forum/18-allwinner-h6/

I am also playing around with Z-Wave. If you want stable operations (and for smart home you want), you have to choose hardware that is matured. Not the latest ones - perfect board for this would be some H5 or H3 variant.

Raspberry Pi is a simple 10 years old technology. Linux kernel is matured there. Kernel matters! Installing "Debian" or "Ubuntu" or upgrading doesn't change the most important thing - kernel.

Olofmeister · Published in yesterday 22:25

Hey, ik was laatst zelf wat bezig met tech en frustratie over apparaten die niet werken, en toevallig stuitte ik op vegas hero. Eerst verloor ik een paar rondes bij de slots, wat best ontmoedigend was, maar na wat extra risico had ik ineens een flinke winst te pakken. Het voelde echt opluchtend en gaf me precies dat beetje spanning dat ik nodig had na een frustrerende dag. Sindsdien speel ik er regelmatig en het is echt een leuke manier om even te ontspannen.