please choosego to mobile | Continue to access the PC version
View: 4000|Reply: 1

OPI PC+ emmc problem

[Copy link]

2

threads

3

posts

34

credits

Novice

Rank: 1

credits
34
Published in 2020-5-11 00:24:33 | Show all floors |Read mode
Hi,


Can't install to emmc memory. The partition simply not appears at /dev/ and "fdisk -l" dont see it. SD Card works ok.


I tried to install to emmc in 3 ways:
1) PhoneixCard using product mode with native Android image (for OPI PC+) - no result, red led are not blinking
2) FEL Installer with H3Droid image via OTG port, Installer sees the board and SD card, but no emmc - no result
3) Armbian "nand-sata-install" - no result


dmesg returns
[    1.264101] mmc2: host doesn't support card's voltages
[    1.264115] mmc2: error -22 whilst initialising SDIO card


This return probably means that emmc is dead?

would you please recommend me some additional diagnostic? maybe I need it access from U-boot?

thanks in advance and be healthy!

2

threads

3

posts

34

credits

Novice

Rank: 1

credits
34
 Author| Published in 2020-5-11 19:32:39 | Show all floors
Edited by Pasha_ram at 2020-5-11 20:40

in U-boot, when I'm trying to select it by sending command "mmc dev 1" it returns "Card did not respond to voltage select!"

Does It means it is dead already?
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list