Phoenix card software error burning card

myroman · Published in 2015-10-3 18:26:22

What about this software?
I done everything by manual for installing android on Orange Pi Pc but constantly getting error during burn process.
What is the problem with this software?
I tried with two different cards (32gb and 4gb both class 10, kingston).

crazykill · Published in 2015-10-3 20:12:11

What windows version are you using ?

myroman · Published in 2015-10-3 20:24:54

Edited by myroman at 2015-10-3 20:26

I tried on windows 8.1 and windows 10.

crazykill · Published in 2015-10-5 02:15:57

Edited by crazykill at 2015-10-5 02:17

For me, phoenix gives a lot of burn errors on everything above xp.Try using xp and make sure its a startup burn.If you dont have a xp machine or you dont want to change windows just use a virtual os works like charm.

zhangbuzheng · Published in 2015-10-20 00:50:23

you can try this method:use this command: dd bs=512 count=1 if=/dev/zero of=/dev/sdb you should use this command in Linux os. then, switch to windows os, and use Phoenix to startup burn

zhangbuzheng · Published in 2015-10-20 00:52:59

/dev/sdb is your SD card, you have to change it according actual situation

melanrz · Published in 2015-10-20 18:38:25

use this version
https://mega.nz/#!dN0jVb4Y!JJFNF ... UfxOlKgvOsVwWFfPUV4

k0va · Published in 2015-10-20 22:48:09

I had this same problem. I could burn any other image except android with phoenix card. Solution to my problem was usieing another card reader. Don't know why but built in card reader in my laptop dosn't work with phoenix card.

bigohshin · Published in 2016-1-26 12:47:26

melanrz replied at 2015-10-20 18:38
use this version
https://mega.nz/#!dN0jVb4Y!JJFNFJkxtVxYENyZeJj7801YUfxOlKgvOsVwWFfPUV4

Link is dead

Jagger · Published in 2023-9-1 17:44:48

This website may be found at product manager vs product owner. Is a panacea for all issues. It is without a doubt one of my favourites. Strongly recommended!