Openelec Build for OPI PC and 2 now with HW decoding

jernej · Published in 2017-2-27 04:52:58

I would need full log. Partial logs almost never help. And please, upload it as a file somewhere, long posts make forum less readable.

kaynemo · Published in 2017-2-27 05:11:08

Since the system is much much more unstable and glitchy then before the update, I will probably try a clean install+update tomorrow or something

chaszim · Published in 2017-2-27 05:34:37

Edited by chaszim at 2017-2-27 05:37

thc013 replied at 2017-2-26 19:59
@chaszim i see you found your rtc module and does it work when you set it as module ? and if it work ...

There the start of the problem. It's not installed yet, but, I have figured out where it goes, no problem. Nore do I actually know how to address it, once I do install it, from within OpenELEC.
Now, I sure hope it doesn't need to be addressed from root, because, I also don't know how to get to root, if it does. hopeless hua?

kaynemo · Published in 2017-2-27 06:02:58

Ok, sorry, could you download the full file from here?
https://drive.google.com/open?id=0B4SELCbbqRUQWTZkLXZoSENYUVU

NisteR · Published in 2017-2-28 07:16:09

I have an orange pi pc plus with openeelec installed in the EMMC but if I boot the opi with a microsd in the slot, this tries to load the operating system from the microsd and I get black screen. If I start without a microsd, openeelec starts without problems ... How can i boot from emmc with a microsd card in the slot?

jernej · Published in 2017-2-28 07:32:58

Do you have any os on that card? Did you have OpenELEC before that on it?

NisteR · Published in 2017-2-28 08:14:21

Edited by NisteR at 2017-2-28 10:08

jernej replied at 2017-2-28 07:32
Do you have any os on that card? Did you have OpenELEC before that on it?

-- Do you have any os on that card?
No, the card is formatted in NTFS now, is empty.

-- Did you have OpenELEC before that on it?

yes, i had OpenELEC before on the card. But now is a formatted sd card, with nothing.

what can I do?

kaynemo · Published in 2017-2-28 17:02:52

OK, did a clean install/update/setup. The sluggishness is gone (knock on wood), it all seems to function well, but that same video files still stutter.

jernej · Published in 2017-3-1 03:56:15

Then it seems that bootloader is still there. What you have to do is to fully clear SD card, especially the first 10 KiB of the card. I guess you can find some tutorials on the net. I would rather not write the tutorial, because it is easy to specify wrong disk...

kaynemo · Published in 2017-3-1 13:02:46

Any word regarding video stutter?