Please select To the mobile version | Continue to access the desktop computer version

OrangePi

 Login            
 Register            
Search
Hot search: orangepi
View: 1765|Reply: 3

Orange Pi One Ethernet LEDs on but the board does not work

[Copy link]

1

Threads

2

Posts

17

Credits

Novice

Rank: 1

Credits
17
Post time 2018-2-22 23:25:15 | Show all posts |Read mode
Hello

I got this board and i'm using a 5 V, 2 amps , power supply with SD card 10! but the system does not boot up

Any suggestion? thanks


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

3

Threads

163

Posts

6872

Credits

Forum patriarch

Rank: 8Rank: 8

Credits
6872
Post time 2018-2-23 14:50:24 | Show all posts
Hi,
There are 2 possible cases here:
  • Your power supply is not able to hold stable 5V, many power supplies are rated 5VxA but drop the voltage below 5V. This causes the OPI to stop at the boot process. To check if your PSU holds stable 5V, please use a Multimeter. Connect it to GPIO pins 2 or 4 (5V) and pin 6 (GND). If the voltage stays above 5V the PSU is good.
  • The image µSD card is not written correctly. Please follow the instructions of the makers of the image. Also have in mind that most images on the Xunlong/OrangePI pages are outdated. I use armbian and RetrOrangePI images from their web pages on my OPI and have no problems so far.

Please click on reply when answering direct to me. That way I get a notification ;)

"Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety."
                                  Benjamin Franklin 1755

1

Threads

2

Posts

17

Credits

Novice

Rank: 1

Credits
17
 Author| Post time 2018-2-23 20:42:15 | Show all posts
Edited by Kian at 2018-2-23 20:59

I've checked the voltage , it's around 5.1V! then the problem must be the SD card

3

Threads

163

Posts

6872

Credits

Forum patriarch

Rank: 8Rank: 8

Credits
6872
Post time 2018-2-24 16:05:49 | Show all posts
Okay,
If you use Android, there are reports of other users (I use armbian) that there are problems with the pheonix flash tool. Please have a search in the forum.
If you use armbian, please download it from their side (link) and follow their instructions (link).

I hope that helps ;)
Please click on reply when answering direct to me. That way I get a notification ;)

"Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety."
                                  Benjamin Franklin 1755
You have to log in before you can reply Login | Register

Points Rules

Archiver|Mobile edition|Darkroom|OrangePi En ( 粤ICP备14086627号-2

2020-7-4 17:23 GMT+8 , Processed in 0.033297 second(s), 24 queries .

Powered by Discuz! X3.2

© 2014-2015 orangepibbs en.

Quick Reply To Top Return to the list