Linux Distributions for Orange PI H3 boards

loboris

melanrz replied at 2015-9-20 19:13
When i use "sudo nmcli -a d wifi connect" say "non wifi card in system.

/etc/modules must contain 8189es an 8189es must be listed when you run lsmod.

melanrz

loboris replied at 2015-9-21 02:20
/etc/modules must contain 8189es an 8189es must be listed when you run lsmod.

So i have defect module,on etc/modules 8189es is listed,lsmod say no module at all,so yes i have defected module on my pi must speak with supplier trough aliexpres.Thanks.

melanrz

loboris replied at 2015-9-21 02:20
/etc/modules must contain 8189es an 8189es must be listed when you run lsmod.

on log i see:
system-modules-load: Feiled to insert "8189s" : Exec format error

melanrz

so,with android wifi works so problem is on module compatibility,pls help if you can.Thanks.

loboris

melanrz replied at 2015-9-20 22:11
so,with android wifi works so problem is on module compatibility,pls help if you can.Thanks.

Try to download the image again, copy the right script.bin & uImage. I've never had any problem with wifi.

melanrz

ok,i have problem to understand your guide and copy file from script_kernel.tar.gz and overwriting after burning img ,so now i only rename the correct files and working all of thinks.Big thanks for this!!!

Vladimir55

loboris replied at 2015-9-20 19:36
RTC Crystal location (OPI2):

Hi!
Yes, I did not notice under the radiator.
the PCB can not watch manufacturer
orange_pi-2-v1_0-bot.dwg why there are no layers of tracks ...
P.S.
how you are working with interruptions GPIO, Timer?

rosimildo

Hi there!

Reading this thread, someone mentioned that the CSI port has  some pins swapped. Can any one confirm it ?
Is it on the OPI 2 or OPI -PC ?  or both ?

Is there any rev of the H/W with this fixed ?


Thanks!

melanrz

The x2goscript not working,install desktop all ok

melanrz

Working with download new script,then
sudo sh install_x2goserver