OPi PC - Compiling Kernel/uboot/scripts

Fourdee

Hi All,

I recently cross compiled a fully preemble RT kernel for RPi. So I thought i'd give the OPi PC a go (since the loboris kernel currently lacks solid wifi support).

When going though this guide (not sure if its outdated, or even applies to H3?), at the Building u-boot and Building Kernel sections, both git locations require login credentials:

1. root@vm-x64-compiler:~/kernel_opi# git clone https://github.com/orangepi-xunlong/u-boot-orangepi.git
   
2. Cloning into 'u-boot-orangepi'...
   
3. Username for 'https://github.com':
   
4. Password for 'https://github.com':
   
5. remote: Repository not found.
   
6. fatal: Authentication failed for 'https://github.com/orangepi-xunlong/u-boot-orangepi.git/'
   
7. root@vm-x64-compiler:~/kernel_opi# git clone https://github.com/orangepi-xunlong/linux-orangepi.git
   
8. Cloning into 'linux-orangepi'...
   
9. Username for 'https://github.com':
   
10. Password for 'https://github.com':
    
11. remote: Repository not found.
    
12. fatal: Authentication failed for 'https://github.com/orangepi-xunlong/linux-orangepi.git/'
    

Copy code

Does anyone have any advice, links, or a guide to follow for creating the OPi PC kernel, uboot and scripts on a cross compiler? The guys over at RPi have an excellent guide (as a comparision), any chance we could see one here?

I'am pretty new to compling with ARM toolchains, so go easy on me

WereCatf

(since the loboris kernel currently lacks solid wifi support).

Or, you could just use the Loboris - kernel and compile the missing WiFi - modules, like I did. I also recently tested and compiled the WiFi - modules from kernel 4.1.1 via backports, which allows me to use newer, more up-to-date drivers and a wider selection of them.

Fourdee

WereCatf replied at 2016-2-17 19:59
Or, you could just use the Loboris - kernel and compile the missing WiFi - modules, like I did. I al ...

Care to share your updated modules, with the opensource comminuty?

ambra

You are asked for login info because there are no GIT repositories by that name.
The tutorial is outdated.
Use:
git clone https://github.com/orangepi-xunlong/u-boot-sunxi.git
git clone https://github.com/orangepi-xunlong/linux-sunxi.git