First there is a power socket connected to 72Watt PSU, down there are two small 220V GPIO / relay controlled sockets. Next is gigabit fiber optics convert which is at the moment wired to router and router is wired back to Orange. I am planning to add one more ARM board which will operate as router - Olimex Lime. Next to the fiber converter is 12V to 5V converter with 4 x USB charger (1-2A), down from converter is a power and I2C concentrator (home made) + audio amplifier 2 x 3W, down 3T hdd, than Orange Pi, then BMP180 sensor for measuring inside box temperature, than there is additional Ethernet panel for future olimex board, than light meter. There are two PIR sensors attached to wires. One is looking strait below display, one is on the right side. There are few things missing: wifi antenna, outside temperature and humidity sensor DHT22.
Do you have any idea about what it is happening? It looks quite similar to the problem I'm facing when trying to boot Lubuntu 14.04 image (posted here http://www.orangepi.org/orangepi ... &extra=page%3D1) and I'm afraid this is not supported on Orange Pi Mini
@igorpec
I'm running your Debian SD image on Orange pi with a 2GB sd card.
Up time is about 20' with Ethernet an wifi disabled, when I'm using wifi it takes 10' - 15 ' more to take DHCP address
I'm using a one-cell lithium battery, it seems axp209 is not charging battery, i must confirm this.
I upgraded to graphical desktop, very easy with your indications.
Accelerated graphics are not working, there is a easy way to do it?
[Copy link]
Show IP Card
Radar Card
Published in 2015-2-19 05:12:04
Anonimous Post
Author
Published in 2015-4-2 22:40:59