|
I just tried to install v102 on an OrangePi-PC, but I can't get my wifi (and thus internet) up and running. lsusb gives me this info for my wifi adapter:
- Bus 003 Device 002: ID 7392.7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Copy code
When I open the wifi settings it shows my network name followed by "0 Mbit | Strength 0%", which is weird because it finds the network, so I'd assume the signal is greater than 0%. Then it gives straight 0's for IP, Gateway, and Mask. My router is dumb and doesn't let me setup static IPs (thanks Verizon!), so I can't make those things line up between the OPi and the router manually.
When I try to connect to wifi, I get the following:
- Failed to restart network.service: Unit network.service failed to load: No such file or directory.
- Error for wireless request "Set Power Management" (8B2C) ;
- SET failed on device wlan0 ; Operation not supported.
- Error for wireless request "Set Encode" (8b2a) ;
- invalid arguement "MY NETWORK PASSWORD"
- Internet Systems Consortium DHCP Client 4.3.1
- Copyright blah blah blah...
- Listening on LPF/wlan0/74:da:38:42:25:48
- Sending on LPF/wlan0/74:da:38:42:25:48
- Sending on Socket/fallback
- DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
- DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 14
- DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
- etc...
Copy code
The network and password are correct, including correct case, so my thoughts are 1) unsupported wifi dongle, 2) OPi is trying to use the wrong key type (my main computer says it's WPA2 Personal), 3) weak signal from the router that could be remedied (temporarily) by using my iPhone's "hotspot" mode right next to the OPi, or 4) other?
Thanks! |
|